Please can you supply the output from ³show_pci -v². When running QNX6,
are you running the apic version or the bios version?



On 2014/4/9, 7:08 AM, "Klaus Pantleon" <community-noreply@qnx.com> wrote:

>Hello QNX supporters!
>IS there any prblem known about PCIe to PCI-bridges.
>In my actual test PC (SIEMENS) there is a PCIe2PCI-Bridge of Texas called
>"XIO2001".
>With this bridge I cannot get the interrupts back from the PCI devices
>inserted. Therefore no network card or additional serial card is worrking
>properly.
>The drivers are running but there is no feedback from the cards, e.g. the
>"netinfo -L1" tells my that there are packages going out but nothing
>received. If A use sysmon to check received interrupts, I see that no
>interrupts are routed to the QNX4 OS.
>With QNX6 ore Debian7 this is working properly.
>
>
>
>_______________________________________________
>
>General
>http://community.qnx.com/sf/go/post109867
>To cancel your subscription to this discussion, please e-mail
>general-qnx4-unsubscribe@community.qnx.com