Jump to ID:
QNX RTOS v4

Project Home

Discussions

Wiki

Project Info
Forum Topic - Native QNX networking over VPN: (3 Items)
   
 
 
Native QNX networking over VPN  
Hi,

We would like to know if it is possible to remotely connect a QNX4.25 node to a QNX network via a VPN (other suggestions
 to do this are welcome).

Conventional VPN protocols like IPSec are layer 3 protocols which needs TCP/IP, which we dont have on our QNX4.25 
stations.

I was thinking about "bridging" the networks over the internet so that the QNX nodes aren't aware that they are located 
remotely, they just communicate to each other as if they were next to each other.

Can anyone please help.

Kind regards,
Theuns
Re: Native QNX networking over VPN  
Hi Theuns,

Here is a link to infleet program that Provides QNX messaging over a 
TCP/IP:

ftp://ftp.qnx.com/usr/free/qnx4/tcpip/utils/infleet.tgz
ftp://ftp.qnx.com/usr/free/qnx4/tcpip/utils/infleet.tgz.readme

-- 
Respectfully,
Oleg

> Hi,
> 
> We would like to know if it is possible to remotely connect a QNX4.25
> node to a QNX network via a VPN (other suggestions to do this are
> welcome).
> 
> Conventional VPN protocols like IPSec are layer 3 protocols which needs
> TCP/IP, which we dont have on our QNX4.25 stations.
> 
> I was thinking about "bridging" the networks over the internet so that
> the QNX nodes aren't aware that they are located remotely, they just
> communicate to each other as if they were next to each other.
> 
> Can anyone please help.
> 
> Kind regards,
> Theuns
> 
> 
> 
> _______________________________________________
> 
> General
> http://community.qnx.com/sf/go/post86377
Re: Native QNX networking over VPN  
Thanks Oleg,

Will have a look!

Kind regards,
Theuns