Hi Kevin,

Please launch the driver without arguments. If it doesn't help then try to 
use default i/o port 0x1F0 + IRQ 14 (for first channel) and i/o port 0x170 
+ IRQ 15 (for second channel). I use next command to start Fsys.atapi on 
the problematic PC (in one line):

# Fsys.atapi atapi ioport=0x1F0,irq=14,chnl=0 atapi 
ioport=0x170,irq=15,chnl=1

See Fsys.atapi usage for more details.

Some ATAPI controllers don't support legacy i/o ports and IRQs, so you can 
create bootable floppy with show_pci and other needed programs to 
experiment with your hardware.

-- 
Respectfully,
Oleg

> Hiya Olig,
> 
> 	Thanks for helping me look into this.
> 	I don't suppose you know some default i/o port and IRQ values
> for the HDD would be, do you?
> 
> Thanks,
> -Kev
> 
> -----Original Message-----
> From: Oleg Bolshakov [mailto:community-noreply@qnx.com]
> Sent: March 31, 2010 1:27 PM
> To: general-qnx4
> Subject: Re: 2009 Installation CD Install
> 
> Hi Kevin,
> 
> 1. Try to disable as much as possible in the BIOS setup (NIC, sound,
> RAID,
> SATA enhanced mode, legacy emulated devices etc).
> 
> 2. Try to unselect all checkboxes from the "Select Hardware to Auto-
> detect" QNX Installer screen. Then add disk controller on the next
> screen.
> 
> > Hiya,
> > 
> >   I'm having an issue running the install CD on a supermicro 5015b_MT
> > 
> > hardware. The Installation window 'disappears'  i.e. it seems to stop
> > when autodetecting hardware.  It doesn't crash, but doesn't seem to
> > do anything either Running in diognostic mode, this occurs when I
> > leave the PCI Bios checked.  It also stops on some of the NIC
> > drivers. Please advise as to how to diagnose this problem.
> > Thanks,
> > -kev
> > 
> > 
> > 
> > _______________________________________________
> > 
> > General
> > http://community.qnx.com/sf/go/post50929
> 
> _______________________________________________
> 
> General
> http://community.qnx.com/sf/go/post50990
> 
> 
> This e-mail originates from the City of Ottawa e-mail system. Any
> distribution, use or copying of this e-mail or the information it
> contains by other than the intended recipient(s) is unauthorized.
> If you are not the intended recipient, please notify me at the
> telephone number shown above or by return e-mail and delete
> this communication and any copy immediately. Thank you.
> 
> Le pr'esent courriel a 'et'e exp'edi'e par le syst`eme de courriels de
> la Ville d'Ottawa. Toute distribution, utilisation ou
> reproduction du courriel ou des renseignements qui s'y trouvent
> par une personne autre que son destinataire pr'evu est interdite.
> Si vous avez recu le message par erreur, veuillez m'en aviser par
> t'el'ephone (au num'ero pr'ecit'e) ou par courriel, puis supprimer
> sans d'elai la version originale de la communication ainsi que
> toutes ses copies. Je vous remercie de votre collaboration.
> 
> 
> 
> _______________________________________________
> 
> General
> http://community.qnx.com/sf/go/post50997