foundry27 : Post

Forum Topic - QNX RTOS 2009 Update: (19 Items)

View: as

Kevin Warkentin(deleted)

09/30/2009 10:49 AM

post39080

QNX RTOS 2009 Update

Hello:

I am a software project leader at ABB and we have a system that runs under QNX4.25G. We are looking at releasing a new 
version of our process control view (PCV) product and we are wondering if it is too late to be a Beta site for the 
update. If not we would be interested in being a Beta site. If it is too late would it be possible to get an advanced 
copy for testing with our application. We are also interested in knowing what updated drivers are included on the new CD
.

- Thanks,
   Kevin Warkentin

Leo Forget

09/30/2009 10:59 AM

post39083

Re: QNX RTOS 2009 Update

Hi Kevin,

  We are in the process of preparing the iso image for this update. We should be posting it on the QNX4 foundry27 in the
 next day or so. 

 The updated drivers that are to be included in the release are posted at 
http://community.qnx.com/sf/wiki/do/viewPage/projects.qnx4/wiki/SoftwareUpdates 

 We encourage you to download the iso image and look forward to receiving your feedback,

Regards,

Leo

Kevin Warkentin(deleted)

09/30/2009 3:17 PM

post39125

Re: QNX RTOS 2009 Update

Hi Leo:

  Thanks for the info.

   Is the update in the form of an installable CD ?

 - Thanks,
        Kevin



Leo Forget <community-noreply@qnx.com> 
09/30/2009 11:04 AM
Please respond to
post39083@community.qnx.com


To
general-qnx4 <post39083@community.qnx.com>
cc

Subject
Re: QNX RTOS 2009 Update






Hi Kevin,

  We are in the process of preparing the iso image for this update. We 
should be posting it on the QNX4 foundry27 in the next day or so. 

 The updated drivers that are to be included in the release are posted at 
http://community.qnx.com/sf/wiki/do/viewPage/projects.qnx4/wiki/SoftwareUpdates 


 We encourage you to download the iso image and look forward to receiving 
your feedback,

Regards,

Leo



_______________________________________________

General
http://community.qnx.com/sf/go/post39083

Leo Forget

09/30/2009 3:32 PM

post39126

RE: QNX RTOS 2009 Update

Yes, we are posting an iso image that can be downloaded and burnt onto a
CD. The actual released CD will be available early November.

Leo

-----Original Message-----
From: Kevin Warkentin [mailto:community-noreply@qnx.com] 
Sent: September 30, 2009 3:17 PM
To: general-qnx4
Subject: Re: QNX RTOS 2009 Update

Hi Leo:

  Thanks for the info.

   Is the update in the form of an installable CD ?

 - Thanks,
        Kevin



Leo Forget <community-noreply@qnx.com> 
09/30/2009 11:04 AM
Please respond to
post39083@community.qnx.com


To
general-qnx4 <post39083@community.qnx.com>
cc

Subject
Re: QNX RTOS 2009 Update






Hi Kevin,

  We are in the process of preparing the iso image for this update. We 
should be posting it on the QNX4 foundry27 in the next day or so. 

 The updated drivers that are to be included in the release are posted
at 
http://community.qnx.com/sf/wiki/do/viewPage/projects.qnx4/wiki/Software
Updates 


 We encourage you to download the iso image and look forward to
receiving 
your feedback,

Regards,

Leo



_______________________________________________

General
http://community.qnx.com/sf/go/post39083






_______________________________________________

General
http://community.qnx.com/sf/go/post39125

Leo Forget

10/02/2009 5:21 PM

post39321

Re: RE: QNX RTOS 2009 Update

The experimental ISO for the upcoming 2009 QNX 4 Product Suite CD is now available at this location: http://www.qnx.com/
download/feature.html?programid=20095. 

Cheers,

Leo

Oleg Bolshakov

10/03/2009 2:53 AM

post39326

Re: RE: QNX RTOS 2009 Update

I think link must be 
http://www.qnx.com/download/feature.html?programid=20095 (without dot at 
the end of url).

-- 
Respectfully,
Oleg

> The experimental ISO for the upcoming 2009 QNX 4 Product Suite CD is
>  now available at this location:
>  http://www.qnx.com/download/feature.html?programid=20095.
> 
> Cheers,
> 
> Leo
> 
> 
> 
> _______________________________________________
> 
> General
> http://community.qnx.com/sf/go/post39321
>

Kevin Warkentin(deleted)

10/27/2009 11:18 AM

post40795

Re: RE: QNX RTOS 2009 Update

Hi Leo:

We have had very good success with the experimental CD.
We are using an HPZ400 computer and using an Adaptec 2940AU SCSI card along with an Intel Gigabit CT Desktop Adapter.

Is the release of this new QNX CD still slated for early November. Is there a definite November date ?

- Thanks,
  Kevin

Leo Forget

10/27/2009 2:56 PM

post40828

RE: RE: QNX RTOS 2009 Update

Hi Kevin,

  Thanks for the feedback. I'm glad the experimental CD is working out
for your system.

Yes, we are looking at releasing the 2009 Update in November ... I'm
unsure of the exact date as it is contingent on resolving a few
remaining issues and completing final verification.

Cheers,

Leo

-----Original Message-----
From: Kevin Warkentin [mailto:community-noreply@qnx.com] 
Sent: October 27, 2009 11:18 AM
To: general-qnx4
Subject: Re: RE: QNX RTOS 2009 Update

Hi Leo:

We have had very good success with the experimental CD.
We are using an HPZ400 computer and using an Adaptec 2940AU SCSI card
along with an Intel Gigabit CT Desktop Adapter.

Is the release of this new QNX CD still slated for early November. Is
there a definite November date ?

- Thanks,
  Kevin



_______________________________________________

General
http://community.qnx.com/sf/go/post40795

Kevin Warkentin(deleted)

11/04/2009 11:36 AM

post41326

Re: RE: RE: QNX RTOS 2009 Update

Hi Leo:

 Just wondered if there was now a definite November release date for the 2009 QNX4 Update.

 We are looking at trying to release an update of our process control view software which currently uses QNX4.25G ( 
product suite 1999 ).
 If the impending release is next week say then we could plan to use this new release. If it will be in the latter part 
of the month then we will have to use the
newer ( product suite 2003 release).

Please let me know as soon as possible because we have to make this decision within the next week.

 -Thanks,
 
    Kevin

Leo Forget

11/04/2009 2:42 PM

post41354

RE: RE: RE: QNX RTOS 2009 Update

Hi Kevin,

  Next week is going to be very tight. There is a small chance the image will be available for download at the end of 
next week. Most likely, the image will be available sometimes in the following week. So optimistically, the image would 
be available November 13th, 2009. More realistically, we are looking at November 20th. 

Regards,

Léo

-----Original Message-----
From: Kevin Warkentin [mailto:community-noreply@qnx.com] 
Sent: November 4, 2009 11:36 AM
To: general-qnx4
Subject: Re: RE: RE: QNX RTOS 2009 Update

Hi Leo:

 Just wondered if there was now a definite November release date for the 2009 QNX4 Update.

 We are looking at trying to release an update of our process control view software which currently uses QNX4.25G ( 
product suite 1999 ).
 If the impending release is next week say then we could plan to use this new release. If it will be in the latter part 
of the month then we will have to use the
newer ( product suite 2003 release).

Please let me know as soon as possible because we have to make this decision within the next week.

 -Thanks,
 
    Kevin



_______________________________________________

General
http://community.qnx.com/sf/go/post41326

Kevin Warkentin(deleted)

RE: RE: RE: QNX RTOS 2009 Update

Kevin Warkentin(deleted)

11/04/2009 3:43 PM

post41359

RE: RE: RE: QNX RTOS 2009 Update

Hi Leo:

  Thanks for the info.I'll keep my fingers crossed.

- Kevin

 



Leo Forget <community-noreply@qnx.com> 
11/04/2009 02:47 PM
Please respond to
post41354@community.qnx.com


To
general-qnx4 <post41354@community.qnx.com>
cc

Subject
RE: RE: RE: QNX RTOS 2009 Update







Hi Kevin,

  Next week is going to be very tight. There is a small chance the image 
will be available for download at the end of next week. Most likely, the 
image will be available sometimes in the following week. So 
optimistically, the image would be available November 13th, 2009. More 
realistically, we are looking at November 20th. 

Regards,

Léo

-----Original Message-----
From: Kevin Warkentin [mailto:community-noreply@qnx.com] 
Sent: November 4, 2009 11:36 AM
To: general-qnx4
Subject: Re: RE: RE: QNX RTOS 2009 Update

Hi Leo:

 Just wondered if there was now a definite November release date for the 
2009 QNX4 Update.

 We are looking at trying to release an update of our process control view 
software which currently uses QNX4.25G ( product suite 1999 ).
 If the impending release is next week say then we could plan to use this 
new release. If it will be in the latter part of the month then we will 
have to use the
newer ( product suite 2003 release).

Please let me know as soon as possible because we have to make this 
decision within the next week.

 -Thanks,
 
    Kevin



_______________________________________________

General
http://community.qnx.com/sf/go/post41326




_______________________________________________

General
http://community.qnx.com/sf/go/post41354

Kevin Warkentin(deleted)

Re: RE: RE: RE: QNX RTOS 2009 Update

Kevin Warkentin(deleted)

11/10/2009 10:56 AM

post41721

Re: RE: RE: RE: QNX RTOS 2009 Update

Hi Leo:

 Can you tell me what the maximum size of hard drive is that QNX 4.25 will now support ? 

- Thanks,
    Kevin

Leo Forget

RE: RE: RE: RE: QNX RTOS 2009 Update

Leo Forget

11/11/2009 9:14 AM

post41758

RE: RE: RE: RE: QNX RTOS 2009 Update

Hi Kevin,

The eide driver support drives over the 137GB limit via 48 bit LBA
commands. The remaining filesystem/drivers support a 32 bit LBA.

Regards,

Leo

-----Original Message-----
From: Kevin Warkentin [mailto:community-noreply@qnx.com] 
Sent: November 10, 2009 10:56 AM
To: general-qnx4
Subject: Re: RE: RE: RE: QNX RTOS 2009 Update

Hi Leo:

 Can you tell me what the maximum size of hard drive is that QNX 4.25
will now support ? 

- Thanks,
    Kevin



_______________________________________________

General
http://community.qnx.com/sf/go/post41721

Oleg Bolshakov

Re: RE: RE: RE: QNX RTOS 2009 Update

Oleg Bolshakov

11/11/2009 9:23 AM

post41759

Re: RE: RE: RE: QNX RTOS 2009 Update

Hi Kevin,

As far as I know maximum disk size is 1 TB (1,099,511,627,776 bytes).

http://www.qnx.com/developers/qnx4/qnx4kb/solution.html?code=8629

-- 
Respectfully,
Oleg

> Hi Leo:
> 
>  Can you tell me what the maximum size of hard drive is that QNX 4.25
>  will now support ?
> 
> - Thanks,
>     Kevin
> 
> 
> 
> _______________________________________________
> 
> General
> http://community.qnx.com/sf/go/post41721
>

Kevin Warkentin(deleted)

Re: RE: RE: RE: QNX RTOS 2009 Update

Kevin Warkentin(deleted)

11/16/2009 2:07 PM

post42038

Re: RE: RE: RE: QNX RTOS 2009 Update

Hi Leo:

 How does November 20th look for the release of the 2009 update ?

 - Thanks,
      Kevin

Leo Forget

11/16/2009 3:22 PM

post42042

RE: RE: RE: RE: QNX RTOS 2009 Update

Hi Ken,

  The update will be posted and ready for download at some point
tomorrow. The release will also be available as an orderable Update CD
as of November 26th, 2009

Leo

-----Original Message-----
From: Kevin Warkentin [mailto:community-noreply@qnx.com] 
Sent: November 16, 2009 2:07 PM
To: general-qnx4
Subject: Re: RE: RE: RE: QNX RTOS 2009 Update

Hi Leo:

 How does November 20th look for the release of the 2009 update ?

 - Thanks,
      Kevin



_______________________________________________

General
http://community.qnx.com/sf/go/post42038

Kevin Warkentin(deleted)

11/16/2009 3:30 PM

post42043

RE: RE: RE: RE: QNX RTOS 2009 Update

Leo:

 Thanks for the update,
        Kevin



Leo Forget <community-noreply@qnx.com> 
11/16/2009 03:28 PM
Please respond to
post42042@community.qnx.com


To
general-qnx4 <post42042@community.qnx.com>
cc

Subject
RE: RE: RE: RE: QNX RTOS 2009 Update






Hi Ken,

  The update will be posted and ready for download at some point
tomorrow. The release will also be available as an orderable Update CD
as of November 26th, 2009

Leo

-----Original Message-----
From: Kevin Warkentin [mailto:community-noreply@qnx.com] 
Sent: November 16, 2009 2:07 PM
To: general-qnx4
Subject: Re: RE: RE: RE: QNX RTOS 2009 Update

Hi Leo:

 How does November 20th look for the release of the 2009 update ?

 - Thanks,
      Kevin



_______________________________________________

General
http://community.qnx.com/sf/go/post42038




_______________________________________________

General
http://community.qnx.com/sf/go/post42042

Kevin Warkentin(deleted)

11/23/2009 9:56 AM

post42379

Re: RE: RE: RE: RE: QNX RTOS 2009 Update

Hi Leo:

 Just a quick question on how to refer to the 2009 Update.

 Is the official name for the latest update 

    QNX4 Product Suite 2009

In the past it was always a letter indicator ( i.e.QNX 4.25G)

 Thanks,
    Kevin

Leo Forget

11/23/2009 10:29 AM

post42384

RE: RE: RE: RE: RE: QNX RTOS 2009 Update

Hi Kevin,

  The naming approach actually changed last year when we put out a QNX
Product Suite 2008 update. We were trying to stay consistent with that
approach.

  The versioning associated with the various binaries should stay
consistent to the letter approach indicated.

  The reason for the change is that we are no longer doing full releases
and only specific binaries will be updated as required. Thus, you should
not see a full 4.25H release but may see specific binaries with a 4.25H
version associated with it.

Hope this helps,

Leo 



-----Original Message-----
From: Kevin Warkentin [mailto:community-noreply@qnx.com] 
Sent: November 23, 2009 9:57 AM
To: general-qnx4
Subject: Re: RE: RE: RE: RE: QNX RTOS 2009 Update

Hi Leo:

 Just a quick question on how to refer to the 2009 Update.

 Is the official name for the latest update 

    QNX4 Product Suite 2009

In the past it was always a letter indicator ( i.e.QNX 4.25G)

 Thanks,
    Kevin



_______________________________________________

General
http://community.qnx.com/sf/go/post42379

Return

The text you entered is not a valid object ID
More Information
Object IDs begin with an object prefix and end with a number. For example, if you enter
artf2345
the application will jump directly to an artifact with the ID artf2345. Some valid object prefixes are:
artf	for an artifact
doc	for a document
page	for a project page
topc	for a discussion topic
wiki	for a wiki page