Johnson Thomas
|
Re: Booting QNX on QEMU(ARM)
|
Johnson Thomas
06/04/2009 6:20 PM
post30906
|
Re: Booting QNX on QEMU(ARM)
Hi Collin,
Its doing something, but no idea whats its doing.I was trying for at91sam9263 BSP, the same thing happens. I integrated
the u-boot loader also into the image and I have a uImage now. I tried to run u-boot.bin but its crashing with the
following message
qemu: fatal: Trying to execute code outside RAM or ROM at 0x23f00488
R00=23f7871c R01=23f78718 R02=00000000 R03=00000000
R04=00000000 R05=00000000 R06=00000000 R07=00000000
R08=00000000 R09=00000000 R10=00000000 R11=00000000
R12=00000000 R13=23ed2f74 R14=00010094 R15=23f00488
PSR=200001d3 --C- A svc32
s00=00000000( 0) s01=00000000( 0) d00=0000000000000000( 0)
s02=00000000( 0) s03=00000000( 0) d01=0000000000000000( 0)
s04=00000000( 0) s05=00000000( 0) d02=0000000000000000( 0)
s06=00000000( 0) s07=00000000( 0) d03=0000000000000000( 0)
s08=00000000( 0) s09=00000000( 0) d04=0000000000000000( 0)
s10=00000000( 0) s11=00000000( 0) d05=0000000000000000( 0)
s12=00000000( 0) s13=00000000( 0) d06=0000000000000000( 0)
s14=00000000( 0) s15=00000000( 0) d07=0000000000000000( 0)
s16=00000000( 0) s17=00000000( 0) d08=0000000000000000( 0)
s18=00000000( 0) s19=00000000( 0) d09=0000000000000000( 0)
s20=00000000( 0) s21=00000000( 0) d10=0000000000000000( 0)
s22=00000000( 0) s23=00000000( 0) d11=0000000000000000( 0)
s24=00000000( 0) s25=00000000( 0) d12=0000000000000000( 0)
s26=00000000( 0) s27=00000000( 0) d13=0000000000000000( 0)
s28=00000000( 0) s29=00000000( 0) d14=0000000000000000( 0)
s30=00000000( 0) s31=00000000( 0) d15=0000000000000000( 0)
FPSCR: 00000000
Aborted
This is happening with every BSP or image that I am trying. Is there any settings or anything that has to be done for
QEMU or to the way I am creating the image.
Any help would be great.
Thanks,
Johnson
|
|
|