|
satish pattar(deleted)
|
Re: PAngo port for QNX 6.4.1
|
|
satish pattar(deleted)
08/11/2010 1:01 AM
post62589
|
Re: PAngo port for QNX 6.4.1
RE: Pango Libraries for QNX
Hi Sean,
I downloaded manually the required dependencies one by one & copied
to distfiles. I am encountering the below problem after resolving few
dependencies.
#bmake
You can select which build options to use by setting PKG_DEFAULT_OPTIONS
or the following variable. Its current value is shown:
PKG_OPTIONS.pango (not defined)
==========================================================================
=> Build dependency libtool-base>=1.5.18nb5: found libtool-
base-1.5.26nb2
=> Build dependency bzip2>=0.9.0b: found bzip2-1.0.5nb1
=> Build dependency pkg-config>=0.19: found pkg-config-0.23nb1
=> Build dependency renderproto>=0.9.3nb1: found renderproto-0.11
=> Build dependency kbproto>=1.0.2: found kbproto-1.0.3
=> Build dependency xproto>=7.0.9: found xproto-7.0.15
=> Build dependency libXt>=1.0.0: found libXt-1.0.6
=> Full dependency libXft>=2.1.10: found libXft-2.1.13
=> Full dependency fontconfig>=2.5.0: found fontconfig-2.7.1
=> Full dependency zlib>=1.2.3: found zlib-1.2.3
=> Full dependency freetype2>=2.1.10nb1: found freetype2-2.3.9nb1
=> Full dependency libXrender>=0.9.2: found libXrender-0.9.4
=> Full dependency libX11>=1.1: found libX11-1.2.2
=> Full dependency glib2>=2.17.3: found glib2-2.20.4
=> Full dependency cairo>=1.8.0: NOT found
=> Verifying reinstall for ../../graphics/cairo
=> Bootstrap dependency digest>=20010302: found digest-20080510
===> Skipping vulnerability checks.
WARNING: No /var/db/pkg/pkg-vulnerabilities file found.
WARNING: To fix run: `/usr/pkg/sbin/pkg_admin -K /var/db/pkg
fetch-pkg-vulnerabilities'.
=> Checksum SHA1 OK for cairo-1.8.8.tar.gz
=> Checksum RMD160 OK for cairo-1.8.8.tar.gz
===> Installing dependencies for cairo-1.8.8
==========================================================================
The supported build options for cairo are:
x11
The currently selected options are:
x11
You can select which build options to use by setting PKG_DEFAULT_OPTIONS
or the following variable. Its current value is shown:
PKG_OPTIONS.cairo (not defined)
==========================================================================
=> Build dependency libtool-base>=1.5.18nb5: found libtool-base-1.5.26nb2
=> Build dependency pkg-config>=0.19: found pkg-config-0.23nb1
=> Build dependency kbproto>=1.0.2: found kbproto-1.0.3
=> Build dependency xproto>=7.0.9: found xproto-7.0.15
=> Build dependency renderproto>=0.9.3nb1: found renderproto-0.11
=> Build dependency libXt>=1.0.0: found libXt-1.0.6
=> Full dependency MesaLib>=7.0.3: NOT found
=> Verifying reinstall for ../../graphics/MesaLib
=> Bootstrap dependency digest>=20010302: found digest-20080510
===> Skipping vulnerability checks.
WARNING: No /var/db/pkg/pkg-vulnerabilities file found.
WARNING: To fix run: `/usr/pkg/sbin/pkg_admin -K /var/db/pkg
fetch-pkg-vulnerabilities'.
=> Fetching MesaDemos-7.4.4.tar.bz2
=> Total size: 1367659 bytes
I downloaded manually "MesaDemos-7.4.4.tar.bz2" & copied to distfiles , still
it is not getting detected.
What could be the problem ?
Thanks in advance
Sateesh P
________________________________
From: Sean Boudreau <community-noreply@qnx.com>
To: general-pkgsrc <post62419@community.qnx.com>
Sent: Tue, 10 August, 2010 6:54:48 PM
Subject: Re: PAngo port for QNX 6.4.1
You need ftp to work. Are yuo behind a firewall?
-seanb
On Tue, Aug 10, 2010 at 02:16:10AM -0400, satish pattar wrote:
> Hi All,
> I am new to pkgsrc stuff . This is what I did
> # cd pkgsrc/bootstrap
> #./bootstrap
> # cd pkgsrc/devel/pango
> # bmake install
> => Bootstrap dependency digest>=20010302: found digest-20080510 ===> Skipping
> vulnerability checks.
> WARNING: No...
View Full Message
|
|
|
|
|
