Hi In our system running io-net with qnx 6.3.0, setting mtu value using ifconfig sets mru also to the same value. Thus, stack rejects any incoming traffic which is larger than mtu value even though driver supports reception of such frames. Is there any workaround possible to set mru greater than mtu at ip stack? Regards VG
Unfortunately we don¹t support different MRU/MTU sizes in io-net. If you change one, they both change. On 10-11-17 1:13 AM, "Vineet Garg" <community-noreply@qnx.com> wrote: > Hi > > In our system running io-net with qnx 6.3.0, setting mtu value using ifconfig > sets mru also to the same value. Thus, stack rejects any incoming traffic > which is larger than mtu value even though driver supports reception of such > frames. > > Is there any workaround possible to set mru greater than mtu at ip stack? > > > Regards > VG > > > > _______________________________________________ > > Technology > http://community.qnx.com/sf/go/post74902 > > -- Hugh Brown (613) 591-0931 ext. 2209 (voice) QNX Software Systems Ltd. (613) 591-3579 (fax) 175 Terence Matthews Cres. email: hsbrown@qnx.com Kanata, Ontario, Canada. K2M 1W8