Andrew Boyd(deleted)
|
RE: RE: board hangs when ethernet plugged in
|
Andrew Boyd(deleted)
01/21/2010 1:02 PM
post45685
|
RE: RE: board hangs when ethernet plugged in
I took a look at the sloginfo output - Hugh might be
able to notice if there is an initialization problem.
Did you catch any thread looping at high priority?
--
aboyd
|
|
|
Mike Medved
|
Re: RE: board hangs when ethernet plugged in
|
Mike Medved
01/21/2010 2:35 PM
post45701
|
Re: RE: board hangs when ethernet plugged in
One other reference point-
After doing the steps described above, there does not appear to be any threads looping at high priority.
The crash doesn't happen until I configure one of the ethernet ports with an IP address and enable it (either through
the GUI or ifconfig)... then it hangs, and obviously at this point I can't tell if there are threads hogging the CPU or
not.
|
|
|
Mike Medved
|
Re: RE: board hangs when ethernet plugged in
|
Mike Medved
01/21/2010 2:56 PM
post45704
|
Re: RE: board hangs when ethernet plugged in
Another interesting point...
My board has two gigE ports, and i'm not sure which correlates to which wmX in the OS. So if I try to configure wm0
with an IP and enable it, it hangs. If I try to configure wm1 w/ an IP and enable it, it doesn't work, and the attached
slog is the output.
|
Attachment: |
slog
11.66 KB
|
|
|