Thanks for the information (and fast reply) Robert !

Dave

Robert Craig wrote:
>
> They should also use all of the associated configuration utilities and
> libraries as well.  Nothing from io-pkt should be used (utilities and
> libs (e.g. libsocket)).  Essentially, anything related to networking
> should be copied over.  I don't doubt that some things will run as is,
> but (for example) the three that you mention (ifconfig, nicinfo,
> netstat) definitely need to be copied.
>
>         Robert.
>
> -----Original Message-----
> From: Dave Bott [mailto:community-noreply@qnx.com]
> Sent: Wednesday, September 24, 2008 6:24 PM
> To: ionetmig-networking
> Subject: What are the steps and gotchas to running io-net on 6.4.0 ?
>
> I have had more than one customer tell me that they need to be able to
> run io-net on 6.4 - typically because they have custom code in the
> stack, or custom filters, and they work nicely and they don't need all
> of the new io-pkt features, but they do want the 6.4 kernel, or just
> they want to run on a BSP that is only available in 6.4.
>
> What binaries from 6.3.2 do they need to install on 6.4 ? I'm confident
> that they need io-net, npm-tcpip.so, npm-qnet.so if they use it, their
> filters & any driver binaries, but can they use the native ifconfig,
> nicinfo, netstat, or do they need the 6.3.2 versions of those too ?
> Anything else ?
>
> Thanks !
>
> Dave
>
> _______________________________________________
> io-net migration
> http://community.qnx.com/sf/go/post13982
>
>
> _______________________________________________
> io-net migration
> http://community.qnx.com/sf/go/post13983
>


-- 
Dave Bott (dbott@qnx.com)	Field Applications Engineer 
QNX Software Systems, Inc.	Voice: 408-879-7230 
900 E. Hamilton Ave #100	Fax:408-879-7221 
Campbell CA 95008		Cell:408 391-3535

Join Foundry27 <http://community.qnx.com>;  - the new QNX developer forum.