Dave Bott(deleted)
|
MAC not getting set with io-pkt - worked in io-net
|
Dave Bott(deleted)
08/15/2008 4:10 PM
post11892
|
MAC not getting set with io-pkt - worked in io-net
I have a customer using G4 PowerMacs as QNX targets w. 6.3.2
Works great, including the onboard GMAC NIC
Moving to io-pkt, the GMAC driver runs with the shim, but is not picking up the MAC. It's read directly from the
firmware, and set in startup in the hw area and read back in the driver from there.
Any obvious reason why that wouldn't continue to work ? It's possible the customer didn't do everything quite right, but
this is a pain for them - they have 15 MACs *not* running io-pkt...
Any ideas gratefully accepted !
Dave
|
|
|