murugadoss v
07/23/2008 12:35 AM
post10871
|
Hi,
I am working with i.mx27. I ported qnx and serial port is enabled. Now i
try to enable the ethernet. As it has FEC, i enabled the relative script
in build file and i get the display
Welcome to Neutrino on the Freescale MX27ADS (ARM 926 core) Board
Starting ethernet driver ...
#
But when i try to ping it with other local system, it displays
# ping local ip addrs
PING ..................................... : 56 data bytes
ping: sendto: No route to host
ping: sendto: No route to host
ping: sendto: No route to host
Referring TCP/IP document's Troubleshooting part, i was able to get
io-net and drivers running in my system, display
# pidin -p io-net mem
pid tid name prio STATE code data
stack
5 1 proc/boot/io-net 10r SIGWAITINFO 76K 544K
8192(132K)*
5 2 proc/boot/io-net 21r RECEIVE 76K 544K 4096(132K)
5 3 proc/boot/io-net 10r RECEIVE 76K 544K 4096(68K)
5 4 proc/boot/io-net 10r RECEIVE 76K 544K 4096(68K)
5 5 proc/boot/io-net 20r RECEIVE 76K 544K 4096(132K)
libc.so.2 @ 1000000 408K 12K
devn-mcimx27.so @ 106a000 40K 8192
npm-tcpip-v4.so @ 1076000 324K 20K
proc/boot/io-net @ fe000 ( 0) 8192
proc/boot/io-net @ 1069000 ( 0) 4096
When i try to get my server information and map hostname to ip address
using
cat /etc/resolv.conf and
cat /etc/hosts
It display /etc/... ... no such file or directory
# cat /etc/resolv.conf
/etc/resolv.conf: No such file or directory
# cat /etc/host
/etc/host: No such file or directory
# netstat -in
sh: netstat: not found
Can anyone help me in resolving this problem.
Thank u
--
*/Regards,/*
/V.Murugadoss
/
-------------------
We recently installed the spam filter from Abaca. It's over 99% accurate.
Check it out - http://www.abaca.com/promo.htm?domain=gdatech.co.in
-------------------
|
|
|