Robert Craig
|
RE: How to integrate io-pkt into the enumeration process during boot up?
|
Robert Craig
06/17/2008 12:03 PM
post9335
|
RE: How to integrate io-pkt into the enumeration process during boot up?
Can you post the output from "pidin", "pidin mem" and "sloginfo" from
your system after it's booted? I'll try and reproduce your problem
here.
I'd recommend modifying /etc/system/enum/include/net instead of
/etc/system/enum/overrides to change the IONET_CMD line. I'm not 100%
sure that the "overrides" overrides the include side of things. It will
definitely override a device clause, but I'm not sure if it overrides a
macro definition.
Once you've modified the "IONET_CMD" option, then everything should work
OK as long as you've got the proper libraries / binaries in place on the
target.
Robert.
-----Original Message-----
From: stefan thiel [mailto:s.thiel@multitest.com]
Sent: Tuesday, June 17, 2008 7:59 AM
To: ionetmig-networking
Subject: How to integrate io-pkt into the enumeration process during
boot up?
I have a target system with 2 network adapters, one is a Intel chip, the
other is a Marvell chip VendorID: 11abh, DeviceID: 4362h, 88E8053.
Because there is only a io-pkt driver for the Marvell availiable ( which
is working when started manually) I tried to change the device
enumeration and include the starting of io-pkt there.
-> I added to /etc/system/enum/include/pci-vendors a line:
set(PCI_VEND_MARVELL,4362)
-> I added a new entry for the Marvel chip in
/etc/system/enum/devices/net
#Marvell
device( pci, ven=$(PCI_VEND_MARVELL),dev=11ab
tag(devn)
append(legacy, ",nonet")
uniq(netnum,devn-en, 0)
requires($IONET_CMD),)
mount(-Tio-pkt /lib/dll/devnp-msk.so,)
use(symbolic=netmgr)
-> in /etc/system/enum/overrides I set the following
all
set(IONET_CMD, io-pkt-v6-hc -ptcpip)
Result: did not work.
->Errors occuring during boot up:
mount: Can't mount / (type io-pkt-v6-hc)
mount: Possible reason: Invalid argument
mount: Can't mount / (type io-pkt)
mount: Possible reason: Invalid argument
How to change IONET_CMD and mount lines to use io-pkt for all network
devices in the system?
_______________________________________________
io-net migration
http://community.qnx.com/sf/go/post9278
|
|
|