Project Home
Project Home
Wiki
Wiki
Discussion Forums
Discussions
Project Information
Project Info
Forum Topic - 6.3 network drivers under 6.4: (3 Items)
   
6.3 network drivers under 6.4  
Can somebody tell whether network drivers devn-rtl8169 and devn-e1000 built for QNX 6.3.2 will also work with QNX 6.4 
and io-pkt?

The seem to, but we'd like to be sure...

Thanks,
- Thomas
RE: 6.3 network drivers under 6.4  
That's the idea - no need to recompile io-net devn
binaries for 6.4 - the 6.3 binaries should work just
fine with the shim.

There have been a couple of 6.3 (binary) drivers
that have had problems with the shim under 6.4, 
but nearly all the time, this turns out to be a
bug in the 6.3 driver which io-net tolerated, but
the emulation (shim) could/did not.

--
aboyd


RE: 6.3 network drivers under 6.4  
Cool - thanks, Andrew!

- Thomas 

> -----Original Message-----
> From: Andrew Boyd [mailto:community-noreply@qnx.com] 
> Sent: 23 February 2009 16:40
> To: general-networking
> Subject: RE: 6.3 network drivers under 6.4
> 
> 
> That's the idea - no need to recompile io-net devn binaries 
> for 6.4 - the 6.3 binaries should work just fine with the shim.
> 
> There have been a couple of 6.3 (binary) drivers that have 
> had problems with the shim under 6.4, but nearly all the 
> time, this turns out to be a bug in the 6.3 driver which 
> io-net tolerated, but the emulation (shim) could/did not.
> 
> --
> aboyd
> 
> 
> 
> 
> _______________________________________________
> General
> http://community.qnx.com/sf/go/post22739
> 
>