antony Lewis
08/29/2012 4:08 AM
post95247
|
Dear Hugh
Thanks for your response.
Because problem occurs rarely, I put the board under test, as soon as it fails, I'll report the sloginfo messages.
following is ifconfig output.
# ifconfig
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 33192
inet 127.0.0.1 netmask 0xff000000
en0: flags=80008943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST,SHIM> mtu 1500
address: 00:65:43:21:22:60
media: Ethernet 100baseTX full-duplex
status: active
inet 192.168.100.226 netmask 0xffffff00 broadcast 192.168.100.255
en1: flags=80008943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST,SHIM> mtu 1500
address: 00:65:43:21:22:61
media: Ethernet none full-duplex
status: active
inet 192.168.101.226 netmask 0xffffff00 broadcast 192.168.101.255
#
Regards
|
|
|