I'm in the process of creating a custom bsp and I'm trying to install telnetd. I've added inetd to the start scipt and updated the inetd.conf file to point to where telnetd is in the build. The hardware design is based upon an lite5200B platform. I'm using QNX 6.4.0. I am not seeing any output in the syslog when I start inetd with the -d option. So I'm sort of stumped since I've included all the libraries and binaries that I've found mentioned in the documentation. Any thoughts? TIA Dave
Have you added the /etc/inetd.conf file and enabled telnet in the file? On 10-10-08 2:24 PM, "Dave Markland" <community-noreply@qnx.com> wrote: > I'm in the process of creating a custom bsp and I'm trying to install telnetd. > I've added inetd to the start scipt and updated the inetd.conf file to point > to where telnetd is in the build. The hardware design is based upon an > lite5200B platform. > > I'm using QNX 6.4.0. > > I am not seeing any output in the syslog when I start inetd with the -d > option. So I'm sort of stumped since I've included all the libraries and > binaries that I've found mentioned in the documentation. Any thoughts? > > TIA > > Dave > > > > _______________________________________________ > > General > http://community.qnx.com/sf/go/post70103 > -- Hugh Brown (613) 591-0931 ext. 2209 (voice) QNX Software Systems Ltd. (613) 591-3579 (fax) 175 Terence Matthews Cres. email: hsbrown@qnx.com Kanata, Ontario, Canada. K2M 1W8
Yes, I have updated the inet.conf file and the services file for the telnet. I think part of my issue is I don't have any visibility into what error is acturally happening. With the -d option on the inetd invocation, I would have expected to see some sort of debug info in syslog but it is clear of any inet issues.
Here's what I have in my build file: /proc/boot/inetd.conf = { ftp stream tcp nowait root /proc/boot/ftpd in.ftpd -l telnet stream tcp nowait root /proc/boot/telnetd in.telnetd shell stream tcp nowait root /proc/boot/rshd in.rshd login stream tcp nowait root /proc/boot/rlogind in.rlogind } /etc/services = { ftp 21/tcp telnet 23/tcp login 513/tcp shell 514/tcp cmd # no passwords used } /etc/passwd = { root::0:0:Superuser:/root:/bin/sh } On 10-10-08 2:49 PM, "Dave Markland" <community-noreply@qnx.com> wrote: > Yes, I have updated the inet.conf file and the services file for the telnet. I > think part of my issue is I don't have any visibility into what error is > acturally happening. With the -d option on the inetd invocation, I would have > expected to see some sort of debug info in syslog but it is clear of any inet > issues. > > > > _______________________________________________ > > General > http://community.qnx.com/sf/go/post70108 > -- Hugh Brown (613) 591-0931 ext. 2209 (voice) QNX Software Systems Ltd. (613) 591-3579 (fax) 175 Terence Matthews Cres. email: hsbrown@qnx.com Kanata, Ontario, Canada. K2M 1W8
That is effectively what I have in my system. I am wondeing if there is a layout issue and that when inetd is started, it can't find something and then aborts without putting something in the log. Is there some hard coded paths in some of the files binaries?
No, there are no hard coded paths. Do you have login on your build file? You might also need /etc/config/ttys. On 10-10-08 3:17 PM, "Dave Markland" <community-noreply@qnx.com> wrote: > That is effectively what I have in my system. I am wondeing if there is a > layout issue and that when inetd is started, it can't find something and then > aborts without putting something in the log. Is there some hard coded paths in > some of the files binaries? > > > > _______________________________________________ > > General > http://community.qnx.com/sf/go/post70114 > -- Hugh Brown (613) 591-0931 ext. 2209 (voice) QNX Software Systems Ltd. (613) 591-3579 (fax) 175 Terence Matthews Cres. email: hsbrown@qnx.com Kanata, Ontario, Canada. K2M 1W8
I didn't have the login but even adding that, it didn't change. I'm going to have to do some more research in the documentation to make sure that there isn't a library missing.
What happens if you start it by hand? -seanb -----Original Message----- From: Dave Markland [mailto:community-noreply@qnx.com] Sent: Fri 10/8/2010 3:31 PM To: general-networking Subject: Re: inetd not starting I didn't have the login but even adding that, it didn't change. I'm going to have to do some more research in the documentation to make sure that there isn't a library missing. _______________________________________________ General http://community.qnx.com/sf/go/post70119
When I try to start it by hand, all I get is a prompt and I don't see the process started. It almost makes me wonder if there is something it is dependent upon that is not in my build.
The issue seems to have been solved, I found that for some reason I picked up a ^M in the file at the end of a line. Found it when I brought the file up under system via vi.
