Dave Bott(deleted)
|
devnp-e1000 RX overruns on *some* ports
|
Dave Bott(deleted)
08/20/2009 1:09 PM
post36378
|
devnp-e1000 RX overruns on *some* ports
Customer is using QNX 6.4.1 SMP 8x way on a 2x Xeon (each 4-way + hyperthreading (disabled)) board:
Intel S5520UR board
SATA SSD, 4GB RAM, DVD, Intel dual NIC (pro1000PT).
The attached hw-info file (get_hw_info is great!) file shows the PCI setup
There are 4 GigE ports on the board - 2 from an 82575EB chip, 2 from an 82571EB
The 82571EB NICs seem to work fine - can send/receive very well
The 82575 NICs see link status and see receive packets, but after ~200 packets, the received OK count stops and th SQE
error count starts incrementing. The source shows that SQE represents the RX dropped count.
The slog shows an Unexpected irq cause 0x40, which is RX overrun.
The pci config *looks* OK in terms of allocations. Interrupt assignments seem OK too.
Running *just* the 82575 ports did not make a difference.
Any suggestions / known issue ?
Thanks
Dave
|
|
|