Project Home
Project Home
Wiki
Wiki
Discussion Forums
Discussions
Project Information
Project Info
Forum Topic - Intel gigabit ET dual port adapter: (9 Items)
   
Intel gigabit ET dual port adapter  
Is there a driver that will support this board?  I have tried e1000, i82544 and speedo.  Nothing seems to work.  This is
 a single chip that supports two ethernet interfaces.

installed in a dell t3400

intel 82576GB
vid=0x8086
divid=0x10c9



RE: Intel gigabit ET dual port adapter  
We have used Intel Pro 1G dual card with success. Don`t know if it was the same device id as yours tough.

-----Original Message-----
From: ralph kanzler [mailto:community-noreply@qnx.com] 
Sent: June 11, 2009 3:35 PM
To: drivers-networking
Subject: Intel gigabit ET dual port adapter

Is there a driver that will support this board?  I have tried e1000, i82544 and speedo.  Nothing seems to work.  This is
 a single chip that supports two ethernet interfaces.

installed in a dell t3400

intel 82576GB
vid=0x8086
divid=0x10c9





_______________________________________________
Networking Drivers
http://community.qnx.com/sf/go/post31544

RE: Intel gigabit ET dual port adapter  
Hugh Brown is away this week.

Looking at the source to devnp-e1000.so (which is
publicly available) it seems to explictly reference
and support DID 10c9 and 82576.  It's ported source
from Intel which is supposed to support ALL variants.

--
aboyd
RE: Intel gigabit ET dual port adapter  
Are you running 6.3.2 or 6.4.0?


-----Original Message-----
From: ralph kanzler [mailto:community-noreply@qnx.com] 
Sent: Thursday, June 11, 2009 3:35 PM
To: drivers-networking
Subject: Intel gigabit ET dual port adapter

Is there a driver that will support this board?  I have tried e1000,
i82544 and speedo.  Nothing seems to work.  This is a single chip that
supports two ethernet interfaces.

installed in a dell t3400

intel 82576GB
vid=0x8086
divid=0x10c9





_______________________________________________
Networking Drivers
http://community.qnx.com/sf/go/post31544
Re: RE: Intel gigabit ET dual port adapter  
Thanks Mario and Andrew

Hugh,
  I am running 6.4.0.  Also, I have been using the e1000 versions that were attached to the posts in this forum.  Could 
not find them in the driver database and they were not installed with 6.4.0.

Thanks
Ralph
RE: RE: Intel gigabit ET dual port adapter  
Here is the latest io-pkt version of the driver. This driver is released
with 6.4.1.

Hugh.

-----Original Message-----
From: ralph kanzler [mailto:community-noreply@qnx.com] 
Sent: Monday, June 15, 2009 9:35 AM
To: drivers-networking
Subject: Re: RE: Intel gigabit ET dual port adapter

Thanks Mario and Andrew

Hugh,
  I am running 6.4.0.  Also, I have been using the e1000 versions that
were attached to the posts in this forum.  Could not find them in the
driver database and they were not installed with 6.4.0.

Thanks
Ralph

_______________________________________________
Networking Drivers
http://community.qnx.com/sf/go/post31727

Attachment: Text devnp-e1000.so 221.65 KB
Re: RE: RE: Intel gigabit ET dual port adapter  
  Thanks, you go the ball rolling.  I was able to load the e1000 as well as the tigon3 device.  All three appear loaded 
and enabled.  I am runing further tests.

Ralph
Re: RE: Intel gigabit ET dual port adapter  
I am using 6.4.0.
RE: RE: Intel gigabit ET dual port adapter  
The driver will still work with 6.4.0.


-----Original Message-----
From: ralph kanzler [mailto:community-noreply@qnx.com] 
Sent: Monday, June 15, 2009 1:46 PM
To: drivers-networking
Subject: Re: RE: Intel gigabit ET dual port adapter

I am using 6.4.0.

_______________________________________________
Networking Drivers
http://community.qnx.com/sf/go/post31769