Matthias Klein
|
Is the Intel 82567LM NIC supported ?
|
Matthias Klein
03/06/2009 4:19 PM
post23840
|
Is the Intel 82567LM NIC supported ?
Is the Intel 82567LM NIC suppported, which is inside the new Dell Latitiude E5500 notebook ?
|
|
|
Andrew Boyd(deleted)
|
RE: Is the Intel 82567LM NIC supported ?
|
Andrew Boyd(deleted)
03/06/2009 4:22 PM
post23844
|
RE: Is the Intel 82567LM NIC supported ?
> Intel 82567LM
Got a PCI Device ID for that? I don't
see a 567 variant in any i82544 source.
--
aboyd
|
|
|
Ozkan Celik
|
Re: RE: Is the Intel 82567LM NIC supported ?
|
Ozkan Celik
02/23/2010 1:00 PM
post48048
|
Re: RE: Is the Intel 82567LM NIC supported ?
We have a Dell Optiplex 760 that has Intel 82567LM-3 NIC.
Device ID: 10de
Earlier we had QNX 6.4.1 on it, and the NIC worked fine. I think it was working on the driver devnp-e1000.so (I did not
check it though). Now we had to downgrade the system to QNX 6.3.2, and the NIC is not working anymore. I tried mounting
devn-i82544 and a copy of an experimental devn-e1000.so I found on this forum, but both gave the error "No such device".
Mounting devn-speedo.so does not give this error, but en0 does not still appear under dev/io-net after the mounting.
We have to have this system running QNX 6.3.2 and not 6.4.1. Any help would be appreciated.
If there is no way to make the original NIC work on this computer, could you suggest a PCIe network card that would not
have network driver issues on QNX 6.3.2? 2 PCI slots are already occupied, but there is a vacant PCIe slot.
|
|
|
Andrew Boyd(deleted)
|
RE: RE: Is the Intel 82567LM NIC supported ?
|
Andrew Boyd(deleted)
02/23/2010 1:06 PM
post48050
|
RE: RE: Is the Intel 82567LM NIC supported ?
Have you tried running the latest devn-e1000.so
with the "did=0x10de" option for your hardware?
Hugh?
--
aboyd
|
|
|
Hugh Brown
|
Re: Is the Intel 82567LM NIC supported ?
|
Hugh Brown
02/23/2010 1:41 PM
post48063
|
Re: Is the Intel 82567LM NIC supported ?
Please try the attached 6.3.2 driver.
On 10-02-23 1:00 PM, "Ozkan Celik" <community-noreply@qnx.com> wrote:
> We have a Dell Optiplex 760 that has Intel 82567LM-3 NIC.
>
> Device ID: 10de
>
> Earlier we had QNX 6.4.1 on it, and the NIC worked fine. I think it was
> working on the driver devnp-e1000.so (I did not check it though). Now we had
> to downgrade the system to QNX 6.3.2, and the NIC is not working anymore. I
> tried mounting devn-i82544 and a copy of an experimental devn-e1000.so I found
> on this forum, but both gave the error "No such device". Mounting
> devn-speedo.so does not give this error, but en0 does not still appear under
> dev/io-net after the mounting.
>
> We have to have this system running QNX 6.3.2 and not 6.4.1. Any help would be
> appreciated.
>
> If there is no way to make the original NIC work on this computer, could you
> suggest a PCIe network card that would not have network driver issues on QNX
> 6.3.2? 2 PCI slots are already occupied, but there is a vacant PCIe slot.
>
>
>
>
> _______________________________________________
>
> Networking Drivers
> http://community.qnx.com/sf/go/post48048
>
--
Hugh Brown (613) 591-0931 ext. 2209 (voice)
QNX Software Systems Ltd. (613) 591-3579 (fax)
175 Terence Matthews Cres. email: hsbrown@qnx.com
Kanata, Ontario, Canada.
K2M 1W8
|
|
|
Ozkan Celik
|
Re: Is the Intel 82567LM NIC supported ?
|
Ozkan Celik
02/23/2010 4:04 PM
post48095
|
Re: Is the Intel 82567LM NIC supported ?
Thanks a lot for your prompt response and the driver file. I renamed the file to be devn-e1000.so and placed it under /
lib/dll. When I execute
io-net -d e1000 -t tcpip
I am getting the following errors:
unknown symbol: _slogfd
unknown symbol: __slog_mux
unable to load dll devn-e1000: Unresolved symbols
Alternatively trying
io-net -t tcpip
mount -T io-net devn-e1000.so
results in same errors.
I am new to QNX and could not figure out how to use the did=10de option for io-net. I tried slaying io-net first but
that did not help either. I saved network card related portion on pci -vvv output to a text file but I have no means of
transferring it to a computer with internet connection (all USB ports are disabled in BIOS otherwise it would not boot
at all, no floppy disk or CD RW drive either). If you think it would be helpful to have that info, I can find a CD/DVD
RW drive and install it on the machine to get this info out.
Thanks.
|
|
|
Hugh Brown
|
Re: Is the Intel 82567LM NIC supported ?
|
Hugh Brown
02/23/2010 4:07 PM
post48096
|
Re: Is the Intel 82567LM NIC supported ?
Sorry, I'll have to compile it on another machine and give you a new driver.
Hopefully tomorrow.
Hugh.
On 10-02-23 4:04 PM, "Ozkan Celik" <community-noreply@qnx.com> wrote:
> Thanks a lot for your prompt response and the driver file. I renamed the file
> to be devn-e1000.so and placed it under /lib/dll. When I execute
>
> io-net -d e1000 -t tcpip
>
> I am getting the following errors:
>
> unknown symbol: _slogfd
> unknown symbol: __slog_mux
> unable to load dll devn-e1000: Unresolved symbols
>
> Alternatively trying
>
> io-net -t tcpip
> mount -T io-net devn-e1000.so
>
> results in same errors.
>
> I am new to QNX and could not figure out how to use the did=10de option for
> io-net. I tried slaying io-net first but that did not help either. I saved
> network card related portion on pci -vvv output to a text file but I have no
> means of transferring it to a computer with internet connection (all USB ports
> are disabled in BIOS otherwise it would not boot at all, no floppy disk or CD
> RW drive either). If you think it would be helpful to have that info, I can
> find a CD/DVD RW drive and install it on the machine to get this info out.
>
> Thanks.
>
>
>
>
> _______________________________________________
>
> Networking Drivers
> http://community.qnx.com/sf/go/post48095
>
--
Hugh Brown (613) 591-0931 ext. 2209 (voice)
QNX Software Systems Ltd. (613) 591-3579 (fax)
175 Terence Matthews Cres. email: hsbrown@qnx.com
Kanata, Ontario, Canada.
K2M 1W8
|
|
|
Ozkan Celik
|
Re: Is the Intel 82567LM NIC supported ?
|
Ozkan Celik
02/23/2010 4:09 PM
post48097
|
Re: Is the Intel 82567LM NIC supported ?
Thanks. I'll be waiting for your reply.
|
|
|
Hugh Brown
|
Re: Is the Intel 82567LM NIC supported ?
|
Hugh Brown
02/24/2010 7:43 AM
post48154
|
Re: Is the Intel 82567LM NIC supported ?
Please try this one.
On 10-02-23 4:09 PM, "Ozkan Celik" <community-noreply@qnx.com> wrote:
> Thanks. I'll be waiting for your reply.
>
>
>
> _______________________________________________
>
> Networking Drivers
> http://community.qnx.com/sf/go/post48097
>
--
Hugh Brown (613) 591-0931 ext. 2209 (voice)
QNX Software Systems Ltd. (613) 591-3579 (fax)
175 Terence Matthews Cres. email: hsbrown@qnx.com
Kanata, Ontario, Canada.
K2M 1W8
|
|
|
Ozkan Celik
|
Re: Is the Intel 82567LM NIC supported ?
|
Ozkan Celik
02/24/2010 3:03 PM
post48225
|
Re: Is the Intel 82567LM NIC supported ?
Great! I think it is working. Thanks a lot, I really appreciate it.
|
|
|
Hugh Brown
|
Re: Is the Intel 82567LM NIC supported ?
|
Hugh Brown
02/24/2010 3:04 PM
post48226
|
Re: Is the Intel 82567LM NIC supported ?
Good news!
On 10-02-24 3:03 PM, "Ozkan Celik" <community-noreply@qnx.com> wrote:
> Great! I think it is working. Thanks a lot, I really appreciate it.
>
>
>
> _______________________________________________
>
> Networking Drivers
> http://community.qnx.com/sf/go/post48225
>
--
Hugh Brown (613) 591-0931 ext. 2209 (voice)
QNX Software Systems Ltd. (613) 591-3579 (fax)
175 Terence Matthews Cres. email: hsbrown@qnx.com
Kanata, Ontario, Canada.
K2M 1W8
|
|
|
Dhanya Aravind
|
Re: Is the Intel 82567LM NIC supported ?
|
Dhanya Aravind
06/07/2011 8:02 PM
post86495
|
Re: Is the Intel 82567LM NIC supported ?
I am looking for the same driver to support 82567V on QNX 6.3. Will the driver attached here work for that as well?
Thanks in advance!
|
|
|
Hugh Brown
|
Re: Is the Intel 82567LM NIC supported ?
|
Hugh Brown
06/08/2011 7:35 AM
post86503
|
Re: Is the Intel 82567LM NIC supported ?
You can try the driver and see if it works. It should work OK.
On 11-06-07 8:02 PM, "Dhanya Aravind" <community-noreply@qnx.com> wrote:
>
>
> I am looking for the same driver to support 82567V on QNX 6.3. Will the
> driver attached here work for that as well? Thanks in advance!
>
>
>
> _______________________________________________
>
> Networking Drivers
> http://community.qnx.com/sf/go/post86495
>
>
--
Hugh Brown (613) 591-0931 ext. 2209 (voice)
QNX Software Systems Ltd. (613) 591-3579 (fax)
175 Terence Matthews Cres. email: hsbrown@qnx.com
Kanata, Ontario, Canada.
K2M 1W8
|
|
|
David Villarosa(deleted)
|
Re: Is the Intel 82567LM NIC supported ?
|
David Villarosa(deleted)
08/02/2011 4:30 PM
post87773
|
Re: Is the Intel 82567LM NIC supported ?
I'm having trouble getting this to work with QNX6.3.2:
Network Interface
Ethernet - Intel® 82567V (10/100BASE-T) Ethernet Controller
pci –vvv
Device id = 1501h
io-net -d e1000 -p tcpip
unable to init dll devn-e1000: No such device
Any help would be appreciated!
Thanks!
|
|
|
Hugh Brown
|
Re: Is the Intel 82567LM NIC supported ?
|
Hugh Brown
08/02/2011 5:10 PM
post87774
|
Re: Is the Intel 82567LM NIC supported ?
That device is not supported by the 6.3.2 driver. It is a new device and is
supported by the 6.5.0 io-pkt driver.
On 11-08-02 4:30 PM, "David Villarosa" <community-noreply@qnx.com> wrote:
> I'm having trouble getting this to work with QNX6.3.2:
>
> Network Interface
> Ethernet - Intel® 82567V (10/100BASE-T) Ethernet Controller
>
> pci vvv
>
> Device id = 1501h
>
> io-net -d e1000 -p tcpip
>
> unable to init dll devn-e1000: No such device
>
> Any help would be appreciated!
> Thanks!
>
>
>
>
> _______________________________________________
>
> Networking Drivers
> http://community.qnx.com/sf/go/post87773
>
--
Hugh Brown (613) 591-0931 ext. 2209 (voice)
QNX Software Systems Limited. (613) 591-3579 (fax)
175 Terence Matthews Cres. email: hsbrown@qnx.com
Kanata, Ontario, Canada.
K2M 1W8
|
|
|
David Villarosa(deleted)
|
Re: Is the Intel 82567LM NIC supported ?
|
David Villarosa(deleted)
08/02/2011 5:16 PM
post87775
|
Re: Is the Intel 82567LM NIC supported ?
Above you state that the e1000 driver "should work OK" in your reply to Dhanya Aravind
06/07/2011 8:02 PM
post86495
Is the LM that much different from the V?
Thanks!
|
|
|
Hugh Brown
|
Re: Is the Intel 82567LM NIC supported ?
|
Hugh Brown
08/03/2011 7:36 AM
post87784
|
Re: Is the Intel 82567LM NIC supported ?
We all make mistakes sometimes!:-) That was my bad this device is not
supported by the 6.3.2 version of the driver.
On 11-08-02 5:16 PM, "David Villarosa" <community-noreply@qnx.com> wrote:
> Above you state that the e1000 driver "should work OK" in your reply to Dhanya
> Aravind
> 06/07/2011 8:02 PM
> post86495
>
> Is the LM that much different from the V?
>
> Thanks!
>
>
>
>
> _______________________________________________
>
> Networking Drivers
> http://community.qnx.com/sf/go/post87775
>
>
--
Hugh Brown (613) 591-0931 ext. 2209 (voice)
QNX Software Systems Limited. (613) 591-3579 (fax)
175 Terence Matthews Cres. email: hsbrown@qnx.com
Kanata, Ontario, Canada.
K2M 1W8
|
|
|
David Villarosa(deleted)
|
Re: Is the Intel 82567LM NIC supported ?
|
David Villarosa(deleted)
08/03/2011 11:45 AM
post87792
|
Re: Is the Intel 82567LM NIC supported ?
No worries! I just assumed Dhanya Aravind got it working since there was no follow-on post.
I'm in a schedule crunch and don't want to spend the time and money to upgrade to QNX 6.4/6.5 right now so do you have
any other dirvers (or can this one be updated) that support the 82567V with 6.3?
Thanks for your support!
|
|
|
Hugh Brown
|
Re: Is the Intel 82567LM NIC supported ?
|
Hugh Brown
08/04/2011 7:31 AM
post87808
|
Re: Is the Intel 82567LM NIC supported ?
Are you specifically looking for gigabit Ethernet or will 10/100 do? We
don¹t have any plans to update the e1000 driver for 6.3.2 right now as the
code will have to be back-ported from 6.5.0.
On 11-08-03 11:45 AM, "David Villarosa" <community-noreply@qnx.com> wrote:
> No worries! I just assumed Dhanya Aravind got it working since there was no
> follow-on post.
>
> I'm in a schedule crunch and don't want to spend the time and money to upgrade
> to QNX 6.4/6.5 right now so do you have any other dirvers (or can this one be
> updated) that support the 82567V with 6.3?
>
> Thanks for your support!
>
>
>
>
> _______________________________________________
>
> Networking Drivers
> http://community.qnx.com/sf/go/post87792
>
>
--
Hugh Brown (613) 591-0931 ext. 2209 (voice)
QNX Software Systems Limited. (613) 591-3579 (fax)
175 Terence Matthews Cres. email: hsbrown@qnx.com
Kanata, Ontario, Canada.
K2M 1W8
|
|
|
David Villarosa(deleted)
|
Re: Is the Intel 82567LM NIC supported ?
|
David Villarosa(deleted)
08/05/2011 4:19 PM
post87863
|
Re: Is the Intel 82567LM NIC supported ?
10/100 will do. Do you have another driver in mind?
|
|
|
Hugh Brown
|
Re: Is the Intel 82567LM NIC supported ?
|
Hugh Brown
08/08/2011 7:49 AM
post87886
|
Re: Is the Intel 82567LM NIC supported ?
Under 6.3.2 we support the Intel PRO/100 adapters as well as the 3Com 905.
These are all 10/100 adapters.
On 11-08-05 4:19 PM, "David Villarosa" <community-noreply@qnx.com> wrote:
> 10/100 will do. Do you have another driver in mind?
>
>
>
>
> _______________________________________________
>
> Networking Drivers
> http://community.qnx.com/sf/go/post87863
>
>
--
Hugh Brown (613) 591-0931 ext. 2209 (voice)
QNX Software Systems Limited. (613) 591-3579 (fax)
175 Terence Matthews Cres. email: hsbrown@qnx.com
Kanata, Ontario, Canada.
K2M 1W8
|
|
|
Alejandro Gonzalez
|
Re: Is the Intel i210AT/i217LM NIC supported ?
|
Alejandro Gonzalez
03/18/2015 5:00 AM
post113564
|
Re: Is the Intel i210AT/i217LM NIC supported ?
Dear Hugh,
we are needing QNX 6.3.2 drivers for this NICs.
I will appreciate your support, best regards
|
|
|
Hugh Brown
|
Re: Is the Intel i210AT/i217LM NIC supported ?
|
Hugh Brown
03/18/2015 7:58 AM
post113568
|
Re: Is the Intel i210AT/i217LM NIC supported ?
You will have to contact your sales rep about this, as the current io-pkt
driver will have to be back-ported to io-net under 6.3.2.
On 2015/3/18, 5:00 AM, "Alejandro Gonzalez" <community-noreply@qnx.com>
wrote:
>Dear Hugh,
>
>we are needing QNX 6.3.2 drivers for this NICs.
>
>I will appreciate your support, best regards
>
>
>
>_______________________________________________
>
>Networking Drivers
>http://community.qnx.com/sf/go/post113564
>To cancel your subscription to this discussion, please e-mail
>drivers-networking-unsubscribe@community.qnx.com
|
|
|
|