Project Home
Project Home		 Wiki
Wiki		 Discussion Forums
Discussions		 Project Information
Project Info
Networking/Discussion/Networking Drivers/devn-e1000/List of Posts
Forum Topic - devn-e1000: (10 Items)
   
Update
Mario Charest
07/21/2008 4:53 PM
post10831
devn-e1000   
Can't find the original post, but Hugh posted an experimental devn-e1000.so for me to try.  It's been over a month, just
 got time to try it now.

It doesn't detect network connection. The status as reported by nicinfo says "Unknown". Once after a reboot I got it to 
indicated "0 Mb/s half-duplex".

The same hardware is handled fine by devn-i82544.so

Mario
Hugh Brown
08/11/2008 7:41 AM
post11613
RE: devn-e1000   
Please try this updated version and let me know if it resolves the
problem.


-----Original Message-----
From: Mario Charest [mailto:mcharest@zinformatic.com] 
Sent: Monday, July 21, 2008 4:54 PM
To: drivers-networking
Subject: devn-e1000

Can't find the original post, but Hugh posted an experimental
devn-e1000.so for me to try.  It's been over a month, just got time to
try it now.

It doesn't detect network connection. The status as reported by nicinfo
says "Unknown". Once after a reboot I got it to indicated "0 Mb/s
half-duplex".

The same hardware is handled fine by devn-i82544.so

Mario

_______________________________________________
Networking Drivers
http://community.qnx.com/sf/go/post10831
Attachment: Text devn-e1000.so 146.49 KB
Mario Charest
08/12/2008 9:25 AM
post11675
Re: RE: devn-e1000   
> Please try this updated version and let me know if it resolves the
> problem.
> 

No go.   If I force the speed and duplex setting it works though.

I have attached the sloginfo info.

Thanks
Attachment: Text sloginfo.txt.txt 23.43 KB
Hugh Brown
08/12/2008 10:16 AM
post11680
RE: RE: devn-e1000   
Mario,

Please try the attached driver. I have tested this one on the same
hardware device ID that you have and it works fine for me.

Thanks, Hugh.

-----Original Message-----
From: Mario Charest [mailto:community-noreply@qnx.com] 
Sent: Tuesday, August 12, 2008 9:25 AM
To: drivers-networking
Subject: Re: RE: devn-e1000

> Please try this updated version and let me know if it resolves the
> problem.
> 

No go.   If I force the speed and duplex setting it works though.

I have attached the sloginfo info.

Thanks

_______________________________________________
Networking Drivers
http://community.qnx.com/sf/go/post11675
Attachment: Text devn-e1000.so 146.46 KB
Mario Charest
08/12/2008 11:30 AM
post11689
Re: RE: RE: devn-e1000   
> Mario,
> 
> Please try the attached driver. I have tested this one on the same
> hardware device ID that you have and it works fine for me.
> 

All the test I did so far was on a 100Mbit Switch. Given you said it was working for you I assumed there had to be 
something else different in our respective setup.  I tried connecting to a 1Gig port on that switch ( it as 1 1Gig port)
 and what do you know it worked.

I then tried going back to 100Mbit and same results, no connection.

With 100MBits the status leds on both the switch and card stay off, as if the cable was never connected.
Hugh Brown
08/12/2008 1:20 PM
post11694
RE: RE: RE: devn-e1000   
That's strange, as I specifically tested it on both 100Mb and Gigabit
and it worked fine. What type of 100Mb switch do you have?


-----Original Message-----
From: Mario Charest [mailto:community-noreply@qnx.com] 
Sent: Tuesday, August 12, 2008 11:31 AM
To: drivers-networking
Subject: Re: RE: RE: devn-e1000

> Mario,
> 
> Please try the attached driver. I have tested this one on the same
> hardware device ID that you have and it works fine for me.
> 

All the test I did so far was on a 100Mbit Switch. Given you said it was
working for you I assumed there had to be something else different in
our respective setup.  I tried connecting to a 1Gig port on that switch
( it as 1 1Gig port) and what do you know it worked.

I then tried going back to 100Mbit and same results, no connection.

With 100MBits the status leds on both the switch and card stay off, as
if the cable was never connected.

_______________________________________________
Networking Drivers
http://community.qnx.com/sf/go/post11689
Mario Charest
08/12/2008 1:37 PM
post11697
Re: RE: RE: RE: devn-e1000   
> That's strange, as I specifically tested it on both 100Mb and Gigabit
> and it worked fine. What type of 100Mb switch do you have?
> 
> 
Cisco Catalist 3350.  I will try with other models.
Mario Charest
08/12/2008 1:48 PM
post11698
Re: RE: RE: RE: devn-e1000   
> That's strange, as I specifically tested it on both 100Mb and Gigabit
> and it worked fine. What type of 100Mb switch do you have?
> 
> 
Tried with a Cisco 2940 and a old 10Mbit hub.  Refuses to autodetect but 1G. Tried 2 cards and 2 cables.

> -----Original Message-----
> From: Mario Charest [mailto:community-noreply@qnx.com] 
> Sent: Tuesday, August 12, 2008 11:31 AM
> To: drivers-networking
> Subject: Re: RE: RE: devn-e1000
> 
> > Mario,
> > 
> > Please try the attached driver. I have tested this one on the same
> > hardware device ID that you have and it works fine for me.
> > 
> 
> All the test I did so far was on a 100Mbit Switch. Given you said it was
> working for you I assumed there had to be something else different in
> our respective setup.  I tried connecting to a 1Gig port on that switch
> ( it as 1 1Gig port) and what do you know it worked.
> 
> I then tried going back to 100Mbit and same results, no connection.
> 
> With 100MBits the status leds on both the switch and card stay off, as
> if the cable was never connected.
> 
> _______________________________________________
> Networking Drivers
> http://community.qnx.com/sf/go/post11689
Hugh Brown
08/12/2008 1:55 PM
post11700
RE: RE: RE: RE: devn-e1000   
I don't know why we always seem to have problems with Cisco switches. I
don't have one here, so I will have to see what I can do. It won't be
right away, as I have other priorities right now.


-----Original Message-----
From: Mario Charest [mailto:community-noreply@qnx.com] 
Sent: Tuesday, August 12, 2008 1:49 PM
To: drivers-networking
Subject: Re: RE: RE: RE: devn-e1000

> That's strange, as I specifically tested it on both 100Mb and Gigabit
> and it worked fine. What type of 100Mb switch do you have?
> 
> 
Tried with a Cisco 2940 and a old 10Mbit hub.  Refuses to autodetect but
1G. Tried 2 cards and 2 cables.

> -----Original Message-----
> From: Mario Charest [mailto:community-noreply@qnx.com] 
> Sent: Tuesday, August 12, 2008 11:31 AM
> To: drivers-networking
> Subject: Re: RE: RE: devn-e1000
> 
> > Mario,
> > 
> > Please try the attached driver. I have tested this one on the same
> > hardware device ID that you have and it works fine for me.
> > 
> 
> All the test I did so far was on a 100Mbit Switch. Given you said it
was
> working for you I assumed there had to be something else different in
> our respective setup.  I tried connecting to a 1Gig port on that
switch
> ( it as 1 1Gig port) and what do you know it worked.
> 
> I then tried going back to 100Mbit and same results, no connection.
> 
> With 100MBits the status leds on both the switch and card stay off, as
> if the cable was never connected.
> 
> _______________________________________________
> Networking Drivers
> http://community.qnx.com/sf/go/post11689




_______________________________________________
Networking Drivers
http://community.qnx.com/sf/go/post11698
Mario Charest
08/12/2008 2:03 PM
post11701
Re: RE: RE: RE: RE: devn-e1000   
> I don't know why we always seem to have problems with Cisco switches. I
> don't have one here, so I will have to see what I can do. It won't be
> right away, as I have other priorities right now.
> 
> 
Thanks.  Meanwhile I'll keep on testing at 1Gig to see if it resolves our other problem.

Return


  A subsidiary of BlackBerry             All content ©2004-2013, QNX Software Systems