Project Home
Project Home		 Wiki
Wiki		 Discussion Forums
Discussions		 Project Information
Project Info
Networking/Discussion/Networking Drivers/Intel e1000 Gbit driver for QNX6.3.x/List of Posts
Forum Topic - Intel e1000 Gbit driver for QNX6.3.x: (9 Items)
   
Update
mario sangalli
04/05/2018 6:47 AM
post118739
Intel e1000 Gbit driver for QNX6.3.x   
Dear All,
I've to update a 6.3 x86 application with a Intel Gbit chip...
I'm search for a devn-e1000.so driver or similar if available,
I will appreciate any support, best regards
mario
Hugh Brown
04/05/2018 8:14 AM
post118740
Re: Intel e1000 Gbit driver for QNX6.3.x   
What is the device PCI-ID that you want to support? We have an old e1000 driver for 6.3.0, but it doesn't support the 
latest Intel device IDs.

On 2018-04-05, 6:27 AM, "mario sangalli" <community-noreply@qnx.com> wrote:

    Dear All,
    I've to update a 6.3 x86 application with a Intel Gbit chip...
    I'm search for a devn-e1000.so driver or similar if available,
    I will appreciate any support, best regards
    mario
    
    
    
    
    
    
    _______________________________________________
    
    Networking Drivers
    http://community.qnx.com/sf/go/post118739
    To cancel your subscription to this discussion, please e-mail drivers-networking-unsubscribe@community.qnx.com
mario sangalli
04/05/2018 9:18 AM
post118741
Re: Intel e1000 Gbit driver for QNX6.3.x   
Thanks for support: 
it's an Intel I210/I211 chip, with DID=x1699

Mario
Hugh Brown
04/05/2018 9:27 AM
post118742
Re: Intel e1000 Gbit driver for QNX6.3.x   
Are you sure that this is the correct device ID? I have just downloaded the latest Linux driver source from Intel and 
there is no device ID 0x1699. All i210 adapters are in the 0x15xx range.

On 2018-04-05, 8:59 AM, "mario sangalli" <community-noreply@qnx.com> wrote:

    Thanks for support: 
    it's an Intel I210/I211 chip, with DID=x1699
    
    Mario
    
    
    
    
    
    _______________________________________________
    
    Networking Drivers
    http://community.qnx.com/sf/go/post118741
    To cancel your subscription to this discussion, please e-mail drivers-networking-unsubscribe@community.qnx.com
mario sangalli
04/05/2018 11:25 AM
post118743
Re: Intel e1000 Gbit driver for QNX6.3.x   
I'm sorry, it is  0x1539, the 0x1699 is for a second ethernet: a Broadcom BCM54610 chip,
in 6.5 i've used the tigon3 driver: if it is available also for 6.3, it should be an alternative to
intel chip,
thanks, mario
Hugh Brown
04/05/2018 11:31 AM
post118744
Re: Intel e1000 Gbit driver for QNX6.3.x   
Please try the attached driver and let me know if it works. If not, I'll have to find a 6.3.0 machine and compile the 
latest driver for you.

Thanks, Hugh.

On 2018-04-05, 11:05 AM, "mario sangalli" <community-noreply@qnx.com> wrote:

    I'm sorry, it is  0x1539, the 0x1699 is for a second ethernet: a Broadcom BCM54610 chip,
    in 6.5 i've used the tigon3 driver: if it is available also for 6.3, it should be an alternative to
    intel chip,
    thanks, mario
    
    
    
    
    _______________________________________________
    
    Networking Drivers
    http://community.qnx.com/sf/go/post118743
    To cancel your subscription to this discussion, please e-mail drivers-networking-unsubscribe@community.qnx.com
Attachment: Text devn-e1000.so 854.25 KB
mario sangalli
04/05/2018 12:06 PM
post118745
Re: Intel e1000 Gbit driver for QNX6.3.x   
Thank you very much, I will test as soon as possible!
mario sangalli
04/10/2018 3:42 AM
post118756
Re: Intel e1000 Gbit driver for QNX6.3.x   
Thanks, Hugh! It works for me.

just another help: the second NIC card is a 1Gb broadcom BCM5785 chip, DID=0x1699,
I've tested the tigon3 driver under 6.5 version and works fine, whilst the 6.3.2 tigon3 
driver do not recognize the chip and when started stop to works after few ping,

Have You a tigon3 update driver for 6.3 ?
Any help is appreciated,
Thanks again
Mario
Hugh Brown
04/10/2018 7:55 AM
post118757
Re: Intel e1000 Gbit driver for QNX6.3.x   
No, we don't have a tigon3 driver update for 6.3.

Hugh.

On 2018-04-10, 3:23 AM, "mario sangalli" <community-noreply@qnx.com> wrote:

    Thanks, Hugh! It works for me.
    
    just another help: the second NIC card is a 1Gb broadcom BCM5785 chip, DID=0x1699,
    I've tested the tigon3 driver under 6.5 version and works fine, whilst the 6.3.2 tigon3 
    driver do not recognize the chip and when started stop to works after few ping,
    
    Have You a tigon3 update driver for 6.3 ?
    Any help is appreciated,
    Thanks again
    Mario
    
    
    
    
    _______________________________________________
    
    Networking Drivers
    http://community.qnx.com/sf/go/post118756
    To cancel your subscription to this discussion, please e-mail drivers-networking-unsubscribe@community.qnx.com

Return


  A subsidiary of BlackBerry             All content ©2004-2013, QNX Software Systems