|
Mario Charest
06/11/2013 5:59 PM
post102184
|
Any driver for intel 10Gig card in the works ? Planned?
|
|
|
|
|
|
Hugh Brown
06/12/2013 7:26 AM
post102196
|
Take a look here
http://community.qnx.com/sf/wiki/do/viewPage/projects.bsp/wiki/DevnpIxgbe.s
o
On 2013-06-11 5:59 PM, "Mario Charest" <community-noreply@qnx.com> wrote:
>Any driver for intel 10Gig card in the works ? Planned?
>
>
>
>_______________________________________________
>
>Networking Drivers
>http://community.qnx.com/sf/go/post102184
>To cancel your subscription to this discussion, please e-mail
>drivers-networking-unsubscribe@community.qnx.com
|
|
|
|
|
|
Mario Charest
06/12/2013 10:28 AM
post102205
|
> -----Message d'origine-----
> De : Hugh Brown [mailto:community-noreply@qnx.com]
> Envoyé : 12 juin 2013 07:27
> À : drivers-networking@community.qnx.com
> Objet : Re: 10G intel
>
> Take a look here
>
> http://community.qnx.com/sf/wiki/do/viewPage/projects.bsp/wiki/DevnpIgbe.s o
Oh yeah!
>
>
>
>
> On 2013-06-11 5:59 PM, "Mario Charest" <community-noreply@qnx.com>
> wrote:
>
> >Any driver for intel 10Gig card in the works ? Planned?
> >
> >
> >
> >_______________________________________________
> >
> >Networking Drivers
> >http://community.qnx.com/sf/go/post102184
> >To cancel your subscription to this discussion, please e-mail
> >drivers-networking-unsubscribe@community.qnx.com
>
>
>
>
>
> _______________________________________________
>
> Networking Drivers
> http://community.qnx.com/sf/go/post102196
> To cancel your subscription to this discussion, please e-mail drivers-
> networking-unsubscribe@community.qnx.com
|
|
|
|
|
|
Mario Charest
06/12/2013 2:25 PM
post102213
|
> Take a look here
>
> http://community.qnx.com/sf/wiki/do/viewPage/projects.bsp/wiki/DevnpIxgbe.so
So far so good, the did is 0x10fb, it got detected and the connection got established, after I did a ifconfig 0x0 up.
nicinfo report a link speed of 10000.00 Mb/s (don't you just love that number), but ifconfig says "1000baseT full-duplex
".
I have enable mtu of 9000, and all capabilities!
That's all I have to report so far.
Do you know if the driver will be release officially at some point or will it only comes with the next QNX release?
>
>
>
>
> On 2013-06-11 5:59 PM, "Mario Charest" <community-noreply@qnx.com> wrote:
>
> >Any driver for intel 10Gig card in the works ? Planned?
> >
> >
> >
> >_______________________________________________
> >
> >Networking Drivers
> >http://community.qnx.com/sf/go/post102184
> >To cancel your subscription to this discussion, please e-mail
> >drivers-networking-unsubscribe@community.qnx.com
>
|
|
|
|
|
|
Hugh Brown
06/12/2013 2:40 PM
post102216
|
When I wrote the driver, there was no definition for 10G, but there is one
now, so I will have to update the driver and let you know.
On 2013-06-12 2:25 PM, "Mario Charest" <community-noreply@qnx.com> wrote:
>> Take a look here
>>
>>
>>http://community.qnx.com/sf/wiki/do/viewPage/projects.bsp/wiki/DevnpIxgbe
>>.so
>
>So far so good, the did is 0x10fb, it got detected and the connection got
>established, after I did a ifconfig 0x0 up. nicinfo report a link speed
>of 10000.00 Mb/s (don't you just love that number), but ifconfig says
>"1000baseT full-duplex".
>
>I have enable mtu of 9000, and all capabilities!
>
>That's all I have to report so far.
>
>Do you know if the driver will be release officially at some point or
>will it only comes with the next QNX release?
>
>>
>>
>>
>>
>> On 2013-06-11 5:59 PM, "Mario Charest" <community-noreply@qnx.com>
>>wrote:
>>
>> >Any driver for intel 10Gig card in the works ? Planned?
>> >
>> >
>> >
>> >_______________________________________________
>> >
>> >Networking Drivers
>> >http://community.qnx.com/sf/go/post102184
>> >To cancel your subscription to this discussion, please e-mail
>> >drivers-networking-unsubscribe@community.qnx.com
>>
>
>
>
>
>
>
>_______________________________________________
>
>Networking Drivers
>http://community.qnx.com/sf/go/post102213
>To cancel your subscription to this discussion, please e-mail
>drivers-networking-unsubscribe@community.qnx.com
|
|
|
|
|
|
Hugh Brown
06/12/2013 2:53 PM
post102220
|
Here's a driver for you to try. Please let me know if ifconfig displays
the correct speed.
Thanks, Hugh.
On 2013-06-12 2:25 PM, "Mario Charest" <community-noreply@qnx.com> wrote:
>> Take a look here
>>
>>
>>http://community.qnx.com/sf/wiki/do/viewPage/projects.bsp/wiki/DevnpIxgbe
>>.so
>
>So far so good, the did is 0x10fb, it got detected and the connection got
>established, after I did a ifconfig 0x0 up. nicinfo report a link speed
>of 10000.00 Mb/s (don't you just love that number), but ifconfig says
>"1000baseT full-duplex".
>
>I have enable mtu of 9000, and all capabilities!
>
>That's all I have to report so far.
>
>Do you know if the driver will be release officially at some point or
>will it only comes with the next QNX release?
>
>>
>>
>>
>>
>> On 2013-06-11 5:59 PM, "Mario Charest" <community-noreply@qnx.com>
>>wrote:
>>
>> >Any driver for intel 10Gig card in the works ? Planned?
>> >
>> >
>> >
>> >_______________________________________________
>> >
>> >Networking Drivers
>> >http://community.qnx.com/sf/go/post102184
>> >To cancel your subscription to this discussion, please e-mail
>> >drivers-networking-unsubscribe@community.qnx.com
>>
>
>
>
>
>
>
>_______________________________________________
>
>Networking Drivers
>http://community.qnx.com/sf/go/post102213
>To cancel your subscription to this discussion, please e-mail
>drivers-networking-unsubscribe@community.qnx.com
|
|
|
|
|
|
Mario Charest
06/12/2013 5:24 PM
post102228
|
> -----Message d'origine-----
> De : Hugh Brown [mailto:community-noreply@qnx.com]
> Envoyé : 12 juin 2013 14:53
> À : drivers-networking@community.qnx.com
> Objet : Re: 10G intel
>
> Here's a driver for you to try. Please let me know if ifconfig displays the
> correct speed.
Still 1000baseT full-duplex
Do make sure the right driver was used I checked use -i and got:
DATE=2013/06/12-14:47:01-EDT
Checksum is 958964157
>
> Thanks, Hugh.
>
>
>
> On 2013-06-12 2:25 PM, "Mario Charest" <community-noreply@qnx.com>
> wrote:
>
> >> Take a look here
> >>
> >>
> >>http://community.qnx.com/sf/wiki/do/viewPage/projects.bsp/wiki/Devnp
> Ix
> >>gbe
> >>.so
> >
> >So far so good, the did is 0x10fb, it got detected and the connection
> >got established, after I did a ifconfig 0x0 up. nicinfo report a link
> >speed of 10000.00 Mb/s (don't you just love that number), but ifconfig
> >says "1000baseT full-duplex".
> >
> >I have enable mtu of 9000, and all capabilities!
> >
> >That's all I have to report so far.
> >
> >Do you know if the driver will be release officially at some point or
> >will it only comes with the next QNX release?
> >
> >>
> >>
> >>
> >>
> >> On 2013-06-11 5:59 PM, "Mario Charest" <community-
> noreply@qnx.com>
> >>wrote:
> >>
> >> >Any driver for intel 10Gig card in the works ? Planned?
> >> >
> >> >
> >> >
> >> >_______________________________________________
> >> >
> >> >Networking Drivers
> >> >http://community.qnx.com/sf/go/post102184
> >> >To cancel your subscription to this discussion, please e-mail
> >> >drivers-networking-unsubscribe@community.qnx.com
> >>
> >
> >
> >
> >
> >
> >
> >_______________________________________________
> >
> >Networking Drivers
> >http://community.qnx.com/sf/go/post102213
> >To cancel your subscription to this discussion, please e-mail
> >drivers-networking-unsubscribe@community.qnx.com
>
>
>
>
>
> _______________________________________________
>
> Networking Drivers
> http://community.qnx.com/sf/go/post102220
> To cancel your subscription to this discussion, please e-mail drivers-
> networking-unsubscribe@community.qnx.com
|
|
|
|
|
|
Mario Charest
09/30/2013 11:38 AM
post105490
|
Has any new driver been release (beta) since the one you posted in June?
>
>
> > -----Message d'origine-----
> > De : Hugh Brown [mailto:community-noreply@qnx.com]
> > Envoyé : 12 juin 2013 14:53
> > À : drivers-networking@community.qnx.com
> > Objet : Re: 10G intel
> >
> > Here's a driver for you to try. Please let me know if ifconfig displays the
> > correct speed.
>
> Still 1000baseT full-duplex
>
> Do make sure the right driver was used I checked use -i and got:
>
> DATE=2013/06/12-14:47:01-EDT
> Checksum is 958964157
>
> >
> > Thanks, Hugh.
> >
> >
> >
> > On 2013-06-12 2:25 PM, "Mario Charest" <community-noreply@qnx.com>
> > wrote:
> >
|
|
|
|
|
|
Hugh Brown
09/30/2013 11:57 AM
post105493
|
No, there haven't been any updates.
On 2013-09-30 11:38 AM, "Mario Charest" <community-noreply@qnx.com> wrote:
>
>Has any new driver been release (beta) since the one you posted in June?
>
>>
>>
>> > -----Message d'origine-----
>> > De : Hugh Brown [mailto:community-noreply@qnx.com]
>> > Envoyé : 12 juin 2013 14:53
>> > À : drivers-networking@community.qnx.com
>> > Objet : Re: 10G intel
>> >
>> > Here's a driver for you to try. Please let me know if ifconfig
>>displays the
>> > correct speed.
>>
>> Still 1000baseT full-duplex
>>
>> Do make sure the right driver was used I checked use -i and got:
>>
>> DATE=2013/06/12-14:47:01-EDT
>> Checksum is 958964157
>>
>> >
>> > Thanks, Hugh.
>> >
>> >
>> >
>> > On 2013-06-12 2:25 PM, "Mario Charest" <community-noreply@qnx.com>
>> > wrote:
>> >
>
>
>
>
>_______________________________________________
>
>Networking Drivers
>http://community.qnx.com/sf/go/post105490
>To cancel your subscription to this discussion, please e-mail
>drivers-networking-unsubscribe@community.qnx.com
|
|
|
|
|
|
Mario Charest
09/30/2013 1:46 PM
post105495
|
> -----Message d'origine-----
> De : Hugh Brown [mailto:community-noreply@qnx.com]
> Envoyé : 30 septembre 2013 11:58
> À : drivers-networking@community.qnx.com
> Objet : Re: 10G intel
>
> No, there haven't been any updates.
>
Ok. I`m not back to doing more test. The situation I have right now is that under heavy traffic TX interrupt are
stoppings, I think. Nicinfo shows packets reception is still going on, but nothing changes on the TX side. I can see
via a tracelogger session that there are still interrupts happening for the device. There is 1 Memory Allocation
Failure on Transmit.
I can recreated this at will. The heavy traffic is caused by starting our software package.
>
>
>
> On 2013-09-30 11:38 AM, "Mario Charest" <community-noreply@qnx.com>
> wrote:
>
> >
> >Has any new driver been release (beta) since the one you posted in June?
> >
> >>
> >>
> >> > -----Message d'origine-----
> >> > De : Hugh Brown [mailto:community-noreply@qnx.com]
> >> > Envoyé : 12 juin 2013 14:53
> >> > À : drivers-networking@community.qnx.com
> >> > Objet : Re: 10G intel
> >> >
> >> > Here's a driver for you to try. Please let me know if ifconfig
> >>displays the
> >> > correct speed.
> >>
> >> Still 1000baseT full-duplex
> >>
> >> Do make sure the right driver was used I checked use -i and got:
> >>
> >> DATE=2013/06/12-14:47:01-EDT
> >> Checksum is 958964157
> >>
> >> >
> >> > Thanks, Hugh.
> >> >
> >> >
> >> >
> >> > On 2013-06-12 2:25 PM, "Mario Charest" <community-
> noreply@qnx.com>
> >> > wrote:
> >> >
> >
> >
> >
> >
> >_______________________________________________
> >
> >Networking Drivers
> >http://community.qnx.com/sf/go/post105490
> >To cancel your subscription to this discussion, please e-mail
> >drivers-networking-unsubscribe@community.qnx.com
>
>
>
>
>
> _______________________________________________
>
> Networking Drivers
> http://community.qnx.com/sf/go/post105493
> To cancel your subscription to this discussion, please e-mail drivers-
> networking-unsubscribe@community.qnx.com
|
|
|
|
|
|
Hugh Brown
09/30/2013 1:53 PM
post105497
|
I'll have to take a look at this when I get a chance.
On 2013-09-30 1:46 PM, "Mario Charest" <community-noreply@qnx.com> wrote:
>
>
>> -----Message d'origine-----
>> De : Hugh Brown [mailto:community-noreply@qnx.com]
>> Envoyé : 30 septembre 2013 11:58
>> À : drivers-networking@community.qnx.com
>> Objet : Re: 10G intel
>>
>> No, there haven't been any updates.
>>
>
>Ok. I`m not back to doing more test. The situation I have right now is
>that under heavy traffic TX interrupt are stoppings, I think. Nicinfo
>shows packets reception is still going on, but nothing changes on the TX
>side. I can see via a tracelogger session that there are still interrupts
>happening for the device. There is 1 Memory Allocation Failure on
>Transmit.
>
>I can recreated this at will. The heavy traffic is caused by starting
>our software package.
>
>>
>>
>>
>> On 2013-09-30 11:38 AM, "Mario Charest" <community-noreply@qnx.com>
>> wrote:
>>
>> >
>> >Has any new driver been release (beta) since the one you posted in
>>June?
>> >
>> >>
>> >>
>> >> > -----Message d'origine-----
>> >> > De : Hugh Brown [mailto:community-noreply@qnx.com]
>> >> > Envoyé : 12 juin 2013 14:53
>> >> > À : drivers-networking@community.qnx.com
>> >> > Objet : Re: 10G intel
>> >> >
>> >> > Here's a driver for you to try. Please let me know if ifconfig
>> >>displays the
>> >> > correct speed.
>> >>
>> >> Still 1000baseT full-duplex
>> >>
>> >> Do make sure the right driver was used I checked use -i and got:
>> >>
>> >> DATE=2013/06/12-14:47:01-EDT
>> >> Checksum is 958964157
>> >>
>> >> >
>> >> > Thanks, Hugh.
>> >> >
>> >> >
>> >> >
>> >> > On 2013-06-12 2:25 PM, "Mario Charest" <community-
>> noreply@qnx.com>
>> >> > wrote:
>> >> >
>> >
>> >
>> >
>> >
>> >_______________________________________________
>> >
>> >Networking Drivers
>> >http://community.qnx.com/sf/go/post105490
>> >To cancel your subscription to this discussion, please e-mail
>> >drivers-networking-unsubscribe@community.qnx.com
>>
>>
>>
>>
>>
>> _______________________________________________
>>
>> Networking Drivers
>> http://community.qnx.com/sf/go/post105493
>> To cancel your subscription to this discussion, please e-mail drivers-
>> networking-unsubscribe@community.qnx.com
>
>
>
>
>_______________________________________________
>
>Networking Drivers
>http://community.qnx.com/sf/go/post105495
>To cancel your subscription to this discussion, please e-mail
>drivers-networking-unsubscribe@community.qnx.com
|
|
|
|
|
|
Mario Charest
06/12/2013 6:22 PM
post102229
|
> -----Message d'origine-----
> De : Hugh Brown [mailto:community-noreply@qnx.com]
> Envoyé : 12 juin 2013 14:53
> À : drivers-networking@community.qnx.com
> Objet : Re: 10G intel
>
> Here's a driver for you to try. Please let me know if ifconfig displays the
> correct speed.
>
If I kill io-pkt-v4 all together and restart it, something isn't right. Pings are taking between 300-3200ms. I've done
the sequence multiple time ( test-restart-fail-reboot-test-restart-fail...) and it constant.
> Thanks, Hugh.
>
>
>
> On 2013-06-12 2:25 PM, "Mario Charest" <community-noreply@qnx.com>
> wrote:
>
> >> Take a look here
> >>
> >>
> >>http://community.qnx.com/sf/wiki/do/viewPage/projects.bsp/wiki/Devnp
> Ix
> >>gbe
> >>.so
> >
> >So far so good, the did is 0x10fb, it got detected and the connection
> >got established, after I did a ifconfig 0x0 up. nicinfo report a link
> >speed of 10000.00 Mb/s (don't you just love that number), but ifconfig
> >says "1000baseT full-duplex".
> >
> >I have enable mtu of 9000, and all capabilities!
> >
> >That's all I have to report so far.
> >
> >Do you know if the driver will be release officially at some point or
> >will it only comes with the next QNX release?
> >
> >>
> >>
> >>
> >>
> >> On 2013-06-11 5:59 PM, "Mario Charest" <community-
> noreply@qnx.com>
> >>wrote:
> >>
> >> >Any driver for intel 10Gig card in the works ? Planned?
> >> >
> >> >
> >> >
> >> >_______________________________________________
> >> >
> >> >Networking Drivers
> >> >http://community.qnx.com/sf/go/post102184
> >> >To cancel your subscription to this discussion, please e-mail
> >> >drivers-networking-unsubscribe@community.qnx.com
> >>
> >
> >
> >
> >
> >
> >
> >_______________________________________________
> >
> >Networking Drivers
> >http://community.qnx.com/sf/go/post102213
> >To cancel your subscription to this discussion, please e-mail
> >drivers-networking-unsubscribe@community.qnx.com
>
>
>
>
>
> _______________________________________________
>
> Networking Drivers
> http://community.qnx.com/sf/go/post102220
> To cancel your subscription to this discussion, please e-mail drivers-
> networking-unsubscribe@community.qnx.com
|
|
|
|
|
|
Hugh Brown
06/13/2013 8:13 AM
post102247
|
I'll have to look at this some time.
On 2013-06-12 6:22 PM, "Mario Charest" <community-noreply@qnx.com> wrote:
>
>
>> -----Message d'origine-----
>> De : Hugh Brown [mailto:community-noreply@qnx.com]
>> Envoyé : 12 juin 2013 14:53
>> À : drivers-networking@community.qnx.com
>> Objet : Re: 10G intel
>>
>> Here's a driver for you to try. Please let me know if ifconfig displays
>>the
>> correct speed.
>>
>If I kill io-pkt-v4 all together and restart it, something isn't right.
>Pings are taking between 300-3200ms. I've done the sequence multiple
>time ( test-restart-fail-reboot-test-restart-fail...) and it constant.
>
>> Thanks, Hugh.
>>
>>
>>
>> On 2013-06-12 2:25 PM, "Mario Charest" <community-noreply@qnx.com>
>> wrote:
>>
>> >> Take a look here
>> >>
>> >>
>> >>http://community.qnx.com/sf/wiki/do/viewPage/projects.bsp/wiki/Devnp
>> Ix
>> >>gbe
>> >>.so
>> >
>> >So far so good, the did is 0x10fb, it got detected and the connection
>> >got established, after I did a ifconfig 0x0 up. nicinfo report a link
>> >speed of 10000.00 Mb/s (don't you just love that number), but ifconfig
>> >says "1000baseT full-duplex".
>> >
>> >I have enable mtu of 9000, and all capabilities!
>> >
>> >That's all I have to report so far.
>> >
>> >Do you know if the driver will be release officially at some point or
>> >will it only comes with the next QNX release?
>> >
>> >>
>> >>
>> >>
>> >>
>> >> On 2013-06-11 5:59 PM, "Mario Charest" <community-
>> noreply@qnx.com>
>> >>wrote:
>> >>
>> >> >Any driver for intel 10Gig card in the works ? Planned?
>> >> >
>> >> >
>> >> >
>> >> >_______________________________________________
>> >> >
>> >> >Networking Drivers
>> >> >http://community.qnx.com/sf/go/post102184
>> >> >To cancel your subscription to this discussion, please e-mail
>> >> >drivers-networking-unsubscribe@community.qnx.com
>> >>
>> >
>> >
>> >
>> >
>> >
>> >
>> >_______________________________________________
>> >
>> >Networking Drivers
>> >http://community.qnx.com/sf/go/post102213
>> >To cancel your subscription to this discussion, please e-mail
>> >drivers-networking-unsubscribe@community.qnx.com
>>
>>
>>
>>
>>
>> _______________________________________________
>>
>> Networking Drivers
>> http://community.qnx.com/sf/go/post102220
>> To cancel your subscription to this discussion, please e-mail drivers-
>> networking-unsubscribe@community.qnx.com
>
>
>
>
>_______________________________________________
>
>Networking Drivers
>http://community.qnx.com/sf/go/post102229
>To cancel your subscription to this discussion, please e-mail
>drivers-networking-unsubscribe@community.qnx.com
|
|
|
|
|
|
Hugh Brown
06/24/2013 10:58 AM
post102577
|
I have tried the driver with my X540 device and cannot reproduce the
problem. What device are you using?
On 2013-06-12 6:22 PM, "Mario Charest" <community-noreply@qnx.com> wrote:
>
>
>> -----Message d'origine-----
>> De : Hugh Brown [mailto:community-noreply@qnx.com]
>> Envoyé : 12 juin 2013 14:53
>> À : drivers-networking@community.qnx.com
>> Objet : Re: 10G intel
>>
>> Here's a driver for you to try. Please let me know if ifconfig displays
>>the
>> correct speed.
>>
>If I kill io-pkt-v4 all together and restart it, something isn't right.
>Pings are taking between 300-3200ms. I've done the sequence multiple
>time ( test-restart-fail-reboot-test-restart-fail...) and it constant.
>
>> Thanks, Hugh.
>>
>>
>>
>> On 2013-06-12 2:25 PM, "Mario Charest" <community-noreply@qnx.com>
>> wrote:
>>
>> >> Take a look here
>> >>
>> >>
>> >>http://community.qnx.com/sf/wiki/do/viewPage/projects.bsp/wiki/Devnp
>> Ix
>> >>gbe
>> >>.so
>> >
>> >So far so good, the did is 0x10fb, it got detected and the connection
>> >got established, after I did a ifconfig 0x0 up. nicinfo report a link
>> >speed of 10000.00 Mb/s (don't you just love that number), but ifconfig
>> >says "1000baseT full-duplex".
>> >
>> >I have enable mtu of 9000, and all capabilities!
>> >
>> >That's all I have to report so far.
>> >
>> >Do you know if the driver will be release officially at some point or
>> >will it only comes with the next QNX release?
>> >
>> >>
>> >>
>> >>
>> >>
>> >> On 2013-06-11 5:59 PM, "Mario Charest" <community-
>> noreply@qnx.com>
>> >>wrote:
>> >>
>> >> >Any driver for intel 10Gig card in the works ? Planned?
>> >> >
>> >> >
>> >> >
>> >> >_______________________________________________
>> >> >
>> >> >Networking Drivers
>> >> >http://community.qnx.com/sf/go/post102184
>> >> >To cancel your subscription to this discussion, please e-mail
>> >> >drivers-networking-unsubscribe@community.qnx.com
>> >>
>> >
>> >
>> >
>> >
>> >
>> >
>> >_______________________________________________
>> >
>> >Networking Drivers
>> >http://community.qnx.com/sf/go/post102213
>> >To cancel your subscription to this discussion, please e-mail
>> >drivers-networking-unsubscribe@community.qnx.com
>>
>>
>>
>>
>>
>> _______________________________________________
>>
>> Networking Drivers
>> http://community.qnx.com/sf/go/post102220
>> To cancel your subscription to this discussion, please e-mail drivers-
>> networking-unsubscribe@community.qnx.com
>
>
>
>
>_______________________________________________
>
>Networking Drivers
>http://community.qnx.com/sf/go/post102229
>To cancel your subscription to this discussion, please e-mail
>drivers-networking-unsubscribe@community.qnx.com
|
|
|
|
|
|
Mario Charest
06/25/2013 4:28 PM
post102655
|
> -----Message d'origine-----
> De : Hugh Brown [mailto:community-noreply@qnx.com]
> Envoyé : 24 juin 2013 10:59
> À : drivers-networking@community.qnx.com
> Objet : Re: 10G intel
>
> I have tried the driver with my X540 device and cannot reproduce the
> problem. What device are you using?
It's a PCIe card, DID=10fb, 82599EB.
>
>
>
> On 2013-06-12 6:22 PM, "Mario Charest" <community-noreply@qnx.com>
> wrote:
>
> >
> >
> >> -----Message d'origine-----
> >> De : Hugh Brown [mailto:community-noreply@qnx.com]
> >> Envoyé : 12 juin 2013 14:53
> >> À : drivers-networking@community.qnx.com
> >> Objet : Re: 10G intel
> >>
> >> Here's a driver for you to try. Please let me know if ifconfig
> >>displays the correct speed.
> >>
> >If I kill io-pkt-v4 all together and restart it, something isn't right.
> >Pings are taking between 300-3200ms. I've done the sequence multiple
> >time ( test-restart-fail-reboot-test-restart-fail...) and it constant.
> >
> >> Thanks, Hugh.
> >>
> >>
> >>
> >> On 2013-06-12 2:25 PM, "Mario Charest" <community-
> noreply@qnx.com>
> >> wrote:
> >>
> >> >> Take a look here
> >> >>
> >> >>
> >>
> >>http://community.qnx.com/sf/wiki/do/viewPage/projects.bsp/wiki/Devn
> >> >>p
> >> Ix
> >> >>gbe
> >> >>.so
> >> >
> >> >So far so good, the did is 0x10fb, it got detected and the
> >> >connection got established, after I did a ifconfig 0x0 up. nicinfo
> >> >report a link speed of 10000.00 Mb/s (don't you just love that
> >> >number), but ifconfig says "1000baseT full-duplex".
> >> >
> >> >I have enable mtu of 9000, and all capabilities!
> >> >
> >> >That's all I have to report so far.
> >> >
> >> >Do you know if the driver will be release officially at some point
> >> >or will it only comes with the next QNX release?
> >> >
> >> >>
> >> >>
> >> >>
> >> >>
> >> >> On 2013-06-11 5:59 PM, "Mario Charest" <community-
> >> noreply@qnx.com>
> >> >>wrote:
> >> >>
> >> >> >Any driver for intel 10Gig card in the works ? Planned?
> >> >> >
> >> >> >
> >> >> >
> >> >> >_______________________________________________
> >> >> >
> >> >> >Networking Drivers
> >> >> >http://community.qnx.com/sf/go/post102184
> >> >> >To cancel your subscription to this discussion, please e-mail
> >> >> >drivers-networking-unsubscribe@community.qnx.com
> >> >>
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >_______________________________________________
> >> >
> >> >Networking Drivers
> >> >http://community.qnx.com/sf/go/post102213
> >> >To cancel your subscription to this discussion, please e-mail
> >> >drivers-networking-unsubscribe@community.qnx.com
> >>
> >>
> >>
> >>
> >>
> >> _______________________________________________
> >>
> >> Networking Drivers
> >> http://community.qnx.com/sf/go/post102220
> >> To cancel your subscription to this discussion, please e-mail
> >> drivers-...
|
|
|
|
|
|
Hugh Brown
06/27/2013 8:15 AM
post102713
|
I also have an 82599 (DID=0x151c) and it works fine. Is yours an on-board
device or is it on a plug-in board? Is it copper, fiber or CX4?
Thanks, Hugh.
On 2013-06-25 4:28 PM, "Mario Charest" <community-noreply@qnx.com> wrote:
>
>
>> -----Message d'origine-----
>> De : Hugh Brown [mailto:community-noreply@qnx.com]
>> Envoyé : 24 juin 2013 10:59
>> À : drivers-networking@community.qnx.com
>> Objet : Re: 10G intel
>>
>> I have tried the driver with my X540 device and cannot reproduce the
>> problem. What device are you using?
>
>It's a PCIe card, DID=10fb, 82599EB.
>
>>
>>
>>
>> On 2013-06-12 6:22 PM, "Mario Charest" <community-noreply@qnx.com>
>> wrote:
>>
>> >
>> >
>> >> -----Message d'origine-----
>> >> De : Hugh Brown [mailto:community-noreply@qnx.com]
>> >> Envoyé : 12 juin 2013 14:53
>> >> À : drivers-networking@community.qnx.com
>> >> Objet : Re: 10G intel
>> >>
>> >> Here's a driver for you to try. Please let me know if ifconfig
>> >>displays the correct speed.
>> >>
>> >If I kill io-pkt-v4 all together and restart it, something isn't right.
>> >Pings are taking between 300-3200ms. I've done the sequence multiple
>> >time ( test-restart-fail-reboot-test-restart-fail...) and it constant.
>> >
>> >> Thanks, Hugh.
>> >>
>> >>
>> >>
>> >> On 2013-06-12 2:25 PM, "Mario Charest" <community-
>> noreply@qnx.com>
>> >> wrote:
>> >>
>> >> >> Take a look here
>> >> >>
>> >> >>
>> >>
>> >>http://community.qnx.com/sf/wiki/do/viewPage/projects.bsp/wiki/Devn
>> >> >>p
>> >> Ix
>> >> >>gbe
>> >> >>.so
>> >> >
>> >> >So far so good, the did is 0x10fb, it got detected and the
>> >> >connection got established, after I did a ifconfig 0x0 up. nicinfo
>> >> >report a link speed of 10000.00 Mb/s (don't you just love that
>> >> >number), but ifconfig says "1000baseT full-duplex".
>> >> >
>> >> >I have enable mtu of 9000, and all capabilities!
>> >> >
>> >> >That's all I have to report so far.
>> >> >
>> >> >Do you know if the driver will be release officially at some point
>> >> >or will it only comes with the next QNX release?
>> >> >
>> >> >>
>> >> >>
>> >> >>
>> >> >>
>> >> >> On 2013-06-11 5:59 PM, "Mario Charest" <community-
>> >> noreply@qnx.com>
>> >> >>wrote:
>> >> >>
>> >> >> >Any driver for intel 10Gig card in the works ? Planned?
>> >> >> >
>> >> >> >
>> >> >> >
>> >> >> >_______________________________________________
>> >> >> >
>> >> >> >Networking Drivers
>> >> >> >http://community.qnx.com/sf/go/post102184
>> >> >> >To cancel your subscription to this discussion, please e-mail
>> >> >> >drivers-networking-unsubscribe@community.qnx.com
>> >> >>
>> >> >
>> >> >
>> >> >
>> >> >
>> >> >
>> >> >
>> >> >_______________________________________________
>>...
View Full Message
|
|
|
|
|
|
Mario Charest
06/27/2013 9:37 AM
post102717
|
> -----Message d'origine-----
> De : Hugh Brown [mailto:community-noreply@qnx.com]
> Envoyé : 27 juin 2013 08:16
> À : drivers-networking@community.qnx.com
> Objet : Re: 10G intel
>
> I also have an 82599 (DID=0x151c) and it works fine. Is yours an on-board
> device or is it on a plug-in board? Is it copper, fiber or CX4?
Plug-in PCIe, CX4. This is a board we got 1 year ago. We will order new ones (coper RJ-45) and I'll try again with
these.
>
> Thanks, Hugh.
>
>
>
>
> On 2013-06-25 4:28 PM, "Mario Charest" <community-noreply@qnx.com>
> wrote:
>
> >
> >
> >> -----Message d'origine-----
> >> De : Hugh Brown [mailto:community-noreply@qnx.com]
> >> Envoyé : 24 juin 2013 10:59
> >> À : drivers-networking@community.qnx.com
> >> Objet : Re: 10G intel
> >>
> >> I have tried the driver with my X540 device and cannot reproduce the
> >> problem. What device are you using?
> >
> >It's a PCIe card, DID=10fb, 82599EB.
> >
> >>
> >>
> >>
> >> On 2013-06-12 6:22 PM, "Mario Charest" <community-
> noreply@qnx.com>
> >> wrote:
> >>
> >> >
> >> >
> >> >> -----Message d'origine-----
> >> >> De : Hugh Brown [mailto:community-noreply@qnx.com]
> >> >> Envoyé : 12 juin 2013 14:53
> >> >> À : drivers-networking@community.qnx.com
> >> >> Objet : Re: 10G intel
> >> >>
> >> >> Here's a driver for you to try. Please let me know if ifconfig
> >> >>displays the correct speed.
> >> >>
> >> >If I kill io-pkt-v4 all together and restart it, something isn't right.
> >> >Pings are taking between 300-3200ms. I've done the sequence
> >> >multiple time ( test-restart-fail-reboot-test-restart-fail...) and it
> constant.
> >> >
> >> >> Thanks, Hugh.
> >> >>
> >> >>
> >> >>
> >> >> On 2013-06-12 2:25 PM, "Mario Charest" <community-
> >> noreply@qnx.com>
> >> >> wrote:
> >> >>
> >> >> >> Take a look here
> >> >> >>
> >> >> >>
> >> >>
> >>
> >>http://community.qnx.com/sf/wiki/do/viewPage/projects.bsp/wiki/Devn
> >> >> >>p
> >> >> Ix
> >> >> >>gbe
> >> >> >>.so
> >> >> >
> >> >> >So far so good, the did is 0x10fb, it got detected and the
> >> >> >connection got established, after I did a ifconfig 0x0 up.
> >> >> >nicinfo report a link speed of 10000.00 Mb/s (don't you just love
> >> >> >that number), but ifconfig says "1000baseT full-duplex".
> >> >> >
> >> >> >I have enable mtu of 9000, and all capabilities!
> >> >> >
> >> >> >That's all I have to report so far.
> >> >> >
> >> >> >Do you know if the driver will be release officially at some
> >> >> >point or will it only comes with the next QNX release?
> >> >> >
> >> >> >>
> >> >> >>
> >> >> >>
> >> >> >>
> >> >> >> On 2013-06-11 5:59 PM, "Mario Charest" <community-
> >> >> noreply@qnx.com>
> >> >> >>wrote:
> >> >> >>
> >> >> >> >Any driver for intel 10Gig card in the works ? ...
View Full Message
|
|
|
|
|
|
Hugh Brown
06/27/2013 10:43 AM
post102719
|
Can you send me one of these boards so that I can resolve the problem?
Thanks, Hugh.
On 2013-06-27 9:36 AM, "Mario Charest" <community-noreply@qnx.com> wrote:
>
>
>> -----Message d'origine-----
>> De : Hugh Brown [mailto:community-noreply@qnx.com]
>> Envoyé : 27 juin 2013 08:16
>> À : drivers-networking@community.qnx.com
>> Objet : Re: 10G intel
>>
>> I also have an 82599 (DID=0x151c) and it works fine. Is yours an
>>on-board
>> device or is it on a plug-in board? Is it copper, fiber or CX4?
>
>Plug-in PCIe, CX4. This is a board we got 1 year ago. We will order new
>ones (coper RJ-45) and I'll try again with these.
>
>>
>> Thanks, Hugh.
>>
>>
>>
>>
>> On 2013-06-25 4:28 PM, "Mario Charest" <community-noreply@qnx.com>
>> wrote:
>>
>> >
>> >
>> >> -----Message d'origine-----
>> >> De : Hugh Brown [mailto:community-noreply@qnx.com]
>> >> Envoyé : 24 juin 2013 10:59
>> >> À : drivers-networking@community.qnx.com
>> >> Objet : Re: 10G intel
>> >>
>> >> I have tried the driver with my X540 device and cannot reproduce the
>> >> problem. What device are you using?
>> >
>> >It's a PCIe card, DID=10fb, 82599EB.
>> >
>> >>
>> >>
>> >>
>> >> On 2013-06-12 6:22 PM, "Mario Charest" <community-
>> noreply@qnx.com>
>> >> wrote:
>> >>
>> >> >
>> >> >
>> >> >> -----Message d'origine-----
>> >> >> De : Hugh Brown [mailto:community-noreply@qnx.com]
>> >> >> Envoyé : 12 juin 2013 14:53
>> >> >> À : drivers-networking@community.qnx.com
>> >> >> Objet : Re: 10G intel
>> >> >>
>> >> >> Here's a driver for you to try. Please let me know if ifconfig
>> >> >>displays the correct speed.
>> >> >>
>> >> >If I kill io-pkt-v4 all together and restart it, something isn't
>>right.
>> >> >Pings are taking between 300-3200ms. I've done the sequence
>> >> >multiple time ( test-restart-fail-reboot-test-restart-fail...) and
>>it
>> constant.
>> >> >
>> >> >> Thanks, Hugh.
>> >> >>
>> >> >>
>> >> >>
>> >> >> On 2013-06-12 2:25 PM, "Mario Charest" <community-
>> >> noreply@qnx.com>
>> >> >> wrote:
>> >> >>
>> >> >> >> Take a look here
>> >> >> >>
>> >> >> >>
>> >> >>
>> >>
>> >>http://community.qnx.com/sf/wiki/do/viewPage/projects.bsp/wiki/Devn
>> >> >> >>p
>> >> >> Ix
>> >> >> >>gbe
>> >> >> >>.so
>> >> >> >
>> >> >> >So far so good, the did is 0x10fb, it got detected and the
>> >> >> >connection got established, after I did a ifconfig 0x0 up.
>> >> >> >nicinfo report a link speed of 10000.00 Mb/s (don't you just love
>> >> >> >that number), but ifconfig says "1000baseT full-duplex".
>> >> >> >
>> >> >> >I have enable mtu of 9000, and all capabilities!
>> >> >> >
>> >> >> >That's all I have to report so far.
>> >> >> >
>> >> >> >Do you know if the driver will be...
View Full Message
|
|
|
|
|
|
Mario Charest
06/27/2013 12:11 PM
post102729
|
Once we get the new one, that sure can be arranged. I`ll contact you when we get them (that could take a while since the
ing. department hasn`t yet finalise the exact model).
> -----Message d'origine-----
> De : Hugh Brown [mailto:community-noreply@qnx.com]
> Envoyé : 27 juin 2013 10:43
> À : drivers-networking@community.qnx.com
> Objet : Re: 10G intel
>
> Can you send me one of these boards so that I can resolve the problem?
>
> Thanks, Hugh.
>
>
>
> On 2013-06-27 9:36 AM, "Mario Charest" <community-noreply@qnx.com>
> wrote:
>
> >
> >
> >> -----Message d'origine-----
> >> De : Hugh Brown [mailto:community-noreply@qnx.com]
> >> Envoyé : 27 juin 2013 08:16
> >> À : drivers-networking@community.qnx.com
> >> Objet : Re: 10G intel
> >>
> >> I also have an 82599 (DID=0x151c) and it works fine. Is yours an
> >>on-board device or is it on a plug-in board? Is it copper, fiber or
> >>CX4?
> >
> >Plug-in PCIe, CX4. This is a board we got 1 year ago. We will order new
> >ones (coper RJ-45) and I'll try again with these.
> >
> >>
> >> Thanks, Hugh.
> >>
> >>
> >>
> >>
> >> On 2013-06-25 4:28 PM, "Mario Charest" <community-
> noreply@qnx.com>
> >> wrote:
> >>
> >> >
> >> >
> >> >> -----Message d'origine-----
> >> >> De : Hugh Brown [mailto:community-noreply@qnx.com]
> >> >> Envoyé : 24 juin 2013 10:59
> >> >> À : drivers-networking@community.qnx.com
> >> >> Objet : Re: 10G intel
> >> >>
> >> >> I have tried the driver with my X540 device and cannot reproduce
> >> >> the problem. What device are you using?
> >> >
> >> >It's a PCIe card, DID=10fb, 82599EB.
> >> >
> >> >>
> >> >>
> >> >>
> >> >> On 2013-06-12 6:22 PM, "Mario Charest" <community-
> >> noreply@qnx.com>
> >> >> wrote:
> >> >>
> >> >> >
> >> >> >
> >> >> >> -----Message d'origine-----
> >> >> >> De : Hugh Brown [mailto:community-noreply@qnx.com]
> >> >> >> Envoyé : 12 juin 2013 14:53
> >> >> >> À : drivers-networking@community.qnx.com
> >> >> >> Objet : Re: 10G intel
> >> >> >>
> >> >> >> Here's a driver for you to try. Please let me know if ifconfig
> >> >> >>displays the correct speed.
> >> >> >>
> >> >> >If I kill io-pkt-v4 all together and restart it, something isn't
> >>right.
> >> >> >Pings are taking between 300-3200ms. I've done the sequence
> >> >> >multiple time ( test-restart-fail-reboot-test-restart-fail...)
> >> >> >and
> >>it
> >> constant.
> >> >> >
> >> >> >> Thanks, Hugh.
> >> >> >>
> >> >> >>
> >> >> >>
> >> >> >> On 2013-06-12 2:25 PM, "Mario Charest" <community-
> >> >> noreply@qnx.com>
> >> >> >> wrote:
> >> >> >>
> >> >> >> >> Take a look here
> >> >> >> >>
> >> >> >> >>
> >> >> >>
> >> >>
> >>
> >>http://community.qnx.com/sf/wiki/do/viewPage/projects.bsp/wiki/Devn
> >> >>...
View Full Message
|
|
|
|
|
|
Hugh Brown
06/27/2013 12:35 PM
post102731
|
OK, thanks.
On 2013-06-27 12:11 PM, "Mario Charest" <community-noreply@qnx.com> wrote:
>Once we get the new one, that sure can be arranged. I`ll contact you when
>we get them (that could take a while since the ing. department hasn`t yet
>finalise the exact model).
>
>> -----Message d'origine-----
>> De : Hugh Brown [mailto:community-noreply@qnx.com]
>> Envoyé : 27 juin 2013 10:43
>> À : drivers-networking@community.qnx.com
>> Objet : Re: 10G intel
>>
>> Can you send me one of these boards so that I can resolve the problem?
>>
>> Thanks, Hugh.
>>
>>
>>
>> On 2013-06-27 9:36 AM, "Mario Charest" <community-noreply@qnx.com>
>> wrote:
>>
>> >
>> >
>> >> -----Message d'origine-----
>> >> De : Hugh Brown [mailto:community-noreply@qnx.com]
>> >> Envoyé : 27 juin 2013 08:16
>> >> À : drivers-networking@community.qnx.com
>> >> Objet : Re: 10G intel
>> >>
>> >> I also have an 82599 (DID=0x151c) and it works fine. Is yours an
>> >>on-board device or is it on a plug-in board? Is it copper, fiber or
>> >>CX4?
>> >
>> >Plug-in PCIe, CX4. This is a board we got 1 year ago. We will order new
>> >ones (coper RJ-45) and I'll try again with these.
>> >
>> >>
>> >> Thanks, Hugh.
>> >>
>> >>
>> >>
>> >>
>> >> On 2013-06-25 4:28 PM, "Mario Charest" <community-
>> noreply@qnx.com>
>> >> wrote:
>> >>
>> >> >
>> >> >
>> >> >> -----Message d'origine-----
>> >> >> De : Hugh Brown [mailto:community-noreply@qnx.com]
>> >> >> Envoyé : 24 juin 2013 10:59
>> >> >> À : drivers-networking@community.qnx.com
>> >> >> Objet : Re: 10G intel
>> >> >>
>> >> >> I have tried the driver with my X540 device and cannot reproduce
>> >> >> the problem. What device are you using?
>> >> >
>> >> >It's a PCIe card, DID=10fb, 82599EB.
>> >> >
>> >> >>
>> >> >>
>> >> >>
>> >> >> On 2013-06-12 6:22 PM, "Mario Charest" <community-
>> >> noreply@qnx.com>
>> >> >> wrote:
>> >> >>
>> >> >> >
>> >> >> >
>> >> >> >> -----Message d'origine-----
>> >> >> >> De : Hugh Brown [mailto:community-noreply@qnx.com]
>> >> >> >> Envoyé : 12 juin 2013 14:53
>> >> >> >> À : drivers-networking@community.qnx.com
>> >> >> >> Objet : Re: 10G intel
>> >> >> >>
>> >> >> >> Here's a driver for you to try. Please let me know if ifconfig
>> >> >> >>displays the correct speed.
>> >> >> >>
>> >> >> >If I kill io-pkt-v4 all together and restart it, something isn't
>> >>right.
>> >> >> >Pings are taking between 300-3200ms. I've done the sequence
>> >> >> >multiple time ( test-restart-fail-reboot-test-restart-fail...)
>> >> >> >and
>> >>it
>> >> constant.
>> >> >> >
>> >> >> >> Thanks, Hugh.
>> >> >> >>
>> >> >> >>
>> >> >> >>
>> >> >> >> On 2013-06-12 2:25 PM, "Mario...
View Full Message
|
|
|
|
|
|
Hugh Brown
06/12/2013 2:55 PM
post102221
|
The driver should be released with the next QNX release.
On 2013-06-12 2:25 PM, "Mario Charest" <community-noreply@qnx.com> wrote:
>> Take a look here
>>
>>
>>http://community.qnx.com/sf/wiki/do/viewPage/projects.bsp/wiki/DevnpIxgbe
>>.so
>
>So far so good, the did is 0x10fb, it got detected and the connection got
>established, after I did a ifconfig 0x0 up. nicinfo report a link speed
>of 10000.00 Mb/s (don't you just love that number), but ifconfig says
>"1000baseT full-duplex".
>
>I have enable mtu of 9000, and all capabilities!
>
>That's all I have to report so far.
>
>Do you know if the driver will be release officially at some point or
>will it only comes with the next QNX release?
>
>>
>>
>>
>>
>> On 2013-06-11 5:59 PM, "Mario Charest" <community-noreply@qnx.com>
>>wrote:
>>
>> >Any driver for intel 10Gig card in the works ? Planned?
>> >
>> >
>> >
>> >_______________________________________________
>> >
>> >Networking Drivers
>> >http://community.qnx.com/sf/go/post102184
>> >To cancel your subscription to this discussion, please e-mail
>> >drivers-networking-unsubscribe@community.qnx.com
>>
>
>
>
>
>
>
>_______________________________________________
>
>Networking Drivers
>http://community.qnx.com/sf/go/post102213
>To cancel your subscription to this discussion, please e-mail
>drivers-networking-unsubscribe@community.qnx.com
|
|
|
|
|
|
Vladimir Bogdanov(deleted)
|
|
|
Vladimir Bogdanov(deleted)
12/23/2013 7:33 AM
post107697
|
Hello.
I'm working with Intel E10G41BFRS aka X520-SR1. Devnp-ixgbe.so gets it good, ifconfig shows it to me as "ix0", but there
is no physical signal, no connection from it. What should I check and where should I look to fix it?
Motherboard Intel S2400SC, two processors Xeon E5-2407, QNX 6.5.0.
With other OS this network card works good.
> Take a look here
>
> http://community.qnx.com/sf/wiki/do/viewPage/projects.bsp/wiki/DevnpIxgbe.s
> o
>
>
>
>
> On 2013-06-11 5:59 PM, "Mario Charest" <community-noreply@qnx.com> wrote:
>
> >Any driver for intel 10Gig card in the works ? Planned?
> >
> >
> >
> >_______________________________________________
> >
> >Networking Drivers
> >http://community.qnx.com/sf/go/post102184
> >To cancel your subscription to this discussion, please e-mail
> >drivers-networking-unsubscribe@community.qnx.com
>
|
|
|
|
|
|
Hugh Brown
01/02/2014 9:45 AM
post107756
|
Have you run the ifconfig or dhcp.client utilities to enable the
interface? If you have, what type of interface do you have (copper, fibre
etc.)?
ifconfig ix0 ip.address
or
dhcp.client -iix0
On 2013/12/23, 7:33 AM, "Vladimir Bogdanov" <community-noreply@qnx.com>
wrote:
>Hello.
>
>I'm working with Intel E10G41BFRS aka X520-SR1. Devnp-ixgbe.so gets it
>good, ifconfig shows it to me as "ix0", but there is no physical signal,
>no connection from it. What should I check and where should I look to fix
>it?
>
>Motherboard Intel S2400SC, two processors Xeon E5-2407, QNX 6.5.0.
>
>With other OS this network card works good.
>
>
>> Take a look here
>>
>>
>>http://community.qnx.com/sf/wiki/do/viewPage/projects.bsp/wiki/DevnpIxgbe
>>.s
>> o
>>
>>
>>
>>
>> On 2013-06-11 5:59 PM, "Mario Charest" <community-noreply@qnx.com>
>>wrote:
>>
>> >Any driver for intel 10Gig card in the works ? Planned?
>> >
>> >
>> >
>> >_______________________________________________
>> >
>> >Networking Drivers
>> >http://community.qnx.com/sf/go/post102184
>> >To cancel your subscription to this discussion, please e-mail
>> >drivers-networking-unsubscribe@community.qnx.com
>>
>
>
>
>
>
>
>_______________________________________________
>
>Networking Drivers
>http://community.qnx.com/sf/go/post107697
>To cancel your subscription to this discussion, please e-mail
>drivers-networking-unsubscribe@community.qnx.com
|
|
|
|
|
|
Adlai Shawareb(deleted)
03/10/2016 7:12 PM
post115944
|
Hugh,
What is the state of support for the 82599 10 Gigabit Ethernet Controller support in 6.6.0 ?
Regards
|
|
|
|
|
|
Hugh Brown
03/14/2016 7:38 AM
post115953
|
The 82599 device is supported by the ixgbe driver in 6.6.0.
On 2016-03-10, 7:12 PM, "Adlai Shawareb" <community-noreply@qnx.com> wrote:
>Hugh,
>
>What is the state of support for the 82599 10 Gigabit Ethernet Controller
>support in 6.6.0 ?
>
>Regards
>
>
>
>_______________________________________________
>
>Networking Drivers
>http://community.qnx.com/sf/go/post115944
>To cancel your subscription to this discussion, please e-mail
>drivers-networking-unsubscribe@community.qnx.com
|
|
|
|
|
|
