y cheng
|
Integrated NIC BCM57780 driver ?
|
y cheng
04/30/2012 12:52 PM
post92847
|
Integrated NIC BCM57780 driver ?
Hi all,
Is there any driver I can use to drive the integrated broadcom NetLink BCM57780 Ethernet card [14e4:1692]? (The Chipset
is Intel 5 Series/3400 Series Chipset.)
I have used the two PCI slots in the motherboard for two external network cards, but I need three physical ethernet
interfaces. I also tried some PCIe ethernet cards with dual ports, none can be driven. If the integrated ethernet card
can't be driven, could you please suggest me some dual ports or four ports ethernet cards which can be used in QNX 6.5.0
?
Many thank.
Yours
Jay
|
|
|
Hugh Brown
|
Re: Integrated NIC BCM57780 driver ?
|
Hugh Brown
04/30/2012 1:09 PM
post92848
|
Re: Integrated NIC BCM57780 driver ?
You can use any Intel dual or quad port gigabit adapters together with the
devnp-e1000.so driver.
--
Hugh Brown
QNX Software Systems Limited
1001 Farrar Rd.,
Ottawa. ON. K2K 0B3.
Telephone: 613-591-0931
On 12-04-30 12:52 PM, "y cheng" <y.cheng4@bradford.ac.uk> wrote:
>Hi all,
>
>Is there any driver I can use to drive the integrated broadcom NetLink
>BCM57780 Ethernet card [14e4:1692]? (The Chipset is Intel 5 Series/3400
>Series Chipset.)
>
>I have used the two PCI slots in the motherboard for two external network
>cards, but I need three physical ethernet interfaces. I also tried some
>PCIe ethernet cards with dual ports, none can be driven. If the
>integrated ethernet card can't be driven, could you please suggest me
>some dual ports or four ports ethernet cards which can be used in QNX
>6.5.0 ?
>
>Many thank.
>
>Yours
>Jay
>
>
>
>_______________________________________________
>
>Networking Drivers
>http://community.qnx.com/sf/go/post92847
>To cancel your subscription to this discussion, please e-mail
>drivers-networking-unsubscribe@community.qnx.com
|
|
|
y cheng
|
Re: Integrated NIC BCM57780 driver ?
|
y cheng
04/30/2012 5:26 PM
post92851
|
Re: Integrated NIC BCM57780 driver ?
Thanks a lot indeed for your helpful information.
This solved my problem!
Best Regards!
Jay
|
|
|
Shoou-Dyi Yeh
|
Re: Integrated NIC BCM57780 driver ?
|
Shoou-Dyi Yeh
05/29/2012 4:47 PM
post93347
|
Re: Integrated NIC BCM57780 driver ?
I am running QNX4.25. The PC has a Broadcom Netlink bcm57780 chip (dev id 1692). I used the Net.e1000 driver you
provided in post88320 and it does not appear to work. The PC came with two ethernet ports and when I did the 'show_pci',
it listed two devises, the other one being bcm5761 (dev id 1681).
Please provide quidance. Thanks.
|
|
|
Shoou-Dyi Yeh
|
Re: Integrated NIC BCM57780 driver ?
|
Shoou-Dyi Yeh
05/29/2012 4:52 PM
post93348
|
Re: Integrated NIC BCM57780 driver ?
I should have mentioned that the it's an Intel Q45 Express Chipset with ICH10DO.
|
|
|
Hugh Brown
|
Re: Integrated NIC BCM57780 driver ?
|
Hugh Brown
05/29/2012 5:25 PM
post93349
|
Re: Integrated NIC BCM57780 driver ?
You can try the attached driver. I am unable to test it, as I don't have
your chipset.
--
Hugh Brown
QNX Software Systems Limited
1001 Farrar Rd.,
Ottawa. ON. K2K 0B3.
Telephone: 613-591-0931
On 12-05-29 4:47 PM, "Shoou-Dyi Yeh" <community-noreply@qnx.com> wrote:
>I am running QNX4.25. The PC has a Broadcom Netlink bcm57780 chip (dev id
>1692). I used the Net.e1000 driver you provided in post88320 and it does
>not appear to work. The PC came with two ethernet ports and when I did
>the 'show_pci', it listed two devises, the other one being bcm5761 (dev
>id 1681).
>
>Please provide quidance. Thanks.
>
>
>
>_______________________________________________
>
>Networking Drivers
>http://community.qnx.com/sf/go/post93347
>To cancel your subscription to this discussion, please e-mail
>drivers-networking-unsubscribe@community.qnx.com
|
|
|
y cheng
|
Re: Integrated NIC BCM57780 driver ?
|
y cheng
05/30/2012 4:57 AM
post93358
|
Re: Integrated NIC BCM57780 driver ?
I downloaded the driver and saved it in /lib/dll, then use "io-pkt-v4-hc -d /lib/dll/Net.bcm57xx" to load the driver(I
did a slay io-pkt-v4-hc before this load command).After load this driver, the list is empty when I issue nicinfo command
and I noticed that one of the four CPUs is fully occupied, have to restart to get rid of it. Am I using the right
command to load the driver ?
BTW, the e1000 driver works perfectly for the new nic intel PCIe card I bought, thanks!
> You can try the attached driver. I am unable to test it, as I don't have
> your chipset.
>
> --
> Hugh Brown
> QNX Software Systems Limited
> 1001 Farrar Rd.,
> Ottawa. ON. K2K 0B3.
> Telephone: 613-591-0931
>
>
>
>
>
>
>
> On 12-05-29 4:47 PM, "Shoou-Dyi Yeh" <community-noreply@qnx.com> wrote:
>
> >I am running QNX4.25. The PC has a Broadcom Netlink bcm57780 chip (dev id
> >1692). I used the Net.e1000 driver you provided in post88320 and it does
> >not appear to work. The PC came with two ethernet ports and when I did
> >the 'show_pci', it listed two devises, the other one being bcm5761 (dev
> >id 1681).
> >
> >Please provide quidance. Thanks.
> >
> >
> >
> >_______________________________________________
> >
> >Networking Drivers
> >http://community.qnx.com/sf/go/post93347
> >To cancel your subscription to this discussion, please e-mail
> >drivers-networking-unsubscribe@community.qnx.com
>
|
|
|
Hugh Brown
|
Re: Integrated NIC BCM57780 driver ?
|
Hugh Brown
05/30/2012 8:19 AM
post93368
|
Re: Integrated NIC BCM57780 driver ?
Sorry, that was a QNX4 driver. Here is one for QNX6.
--
Hugh Brown
QNX Software Systems Limited
1001 Farrar Rd.,
Ottawa. ON. K2K 0B3.
Telephone: 613-591-0931
On 12-05-30 4:57 AM, "y cheng" <community-noreply@qnx.com> wrote:
>I downloaded the driver and saved it in /lib/dll, then use "io-pkt-v4-hc
>-d /lib/dll/Net.bcm57xx" to load the driver(I did a slay io-pkt-v4-hc
>before this load command).After load this driver, the list is empty when
>I issue nicinfo command and I noticed that one of the four CPUs is fully
>occupied, have to restart to get rid of it. Am I using the right command
>to load the driver ?
>
>BTW, the e1000 driver works perfectly for the new nic intel PCIe card I
>bought, thanks!
>
>> You can try the attached driver. I am unable to test it, as I don't have
>> your chipset.
>>
>> --
>> Hugh Brown
>> QNX Software Systems Limited
>> 1001 Farrar Rd.,
>> Ottawa. ON. K2K 0B3.
>> Telephone: 613-591-0931
>>
>>
>>
>>
>>
>>
>>
>> On 12-05-29 4:47 PM, "Shoou-Dyi Yeh" <community-noreply@qnx.com> wrote:
>>
>> >I am running QNX4.25. The PC has a Broadcom Netlink bcm57780 chip (dev
>>id
>> >1692). I used the Net.e1000 driver you provided in post88320 and it
>>does
>> >not appear to work. The PC came with two ethernet ports and when I did
>> >the 'show_pci', it listed two devises, the other one being bcm5761 (dev
>> >id 1681).
>> >
>> >Please provide quidance. Thanks.
>> >
>> >
>> >
>> >_______________________________________________
>> >
>> >Networking Drivers
>> >http://community.qnx.com/sf/go/post93347
>> >To cancel your subscription to this discussion, please e-mail
>> >drivers-networking-unsubscribe@community.qnx.com
>>
>
>
>
>
>
>
>_______________________________________________
>
>Networking Drivers
>http://community.qnx.com/sf/go/post93358
>To cancel your subscription to this discussion, please e-mail
>drivers-networking-unsubscribe@community.qnx.com
|
|
|
y cheng
|
Re: Integrated NIC BCM57780 driver ?
|
y cheng
05/30/2012 8:52 AM
post93369
|
Re: Integrated NIC BCM57780 driver ?
Great, this works for mine integrated NIC, thanks!
> Sorry, that was a QNX4 driver. Here is one for QNX6.
>
> --
> Hugh Brown
> QNX Software Systems Limited
> 1001 Farrar Rd.,
> Ottawa. ON. K2K 0B3.
> Telephone: 613-591-0931
>
>
>
>
>
>
>
> On 12-05-30 4:57 AM, "y cheng" <community-noreply@qnx.com> wrote:
>
> >I downloaded the driver and saved it in /lib/dll, then use "io-pkt-v4-hc
> >-d /lib/dll/Net.bcm57xx" to load the driver(I did a slay io-pkt-v4-hc
> >before this load command).After load this driver, the list is empty when
> >I issue nicinfo command and I noticed that one of the four CPUs is fully
> >occupied, have to restart to get rid of it. Am I using the right command
> >to load the driver ?
> >
> >BTW, the e1000 driver works perfectly for the new nic intel PCIe card I
> >bought, thanks!
> >
> >> You can try the attached driver. I am unable to test it, as I don't have
> >> your chipset.
> >>
> >> --
> >> Hugh Brown
> >> QNX Software Systems Limited
> >> 1001 Farrar Rd.,
> >> Ottawa. ON. K2K 0B3.
> >> Telephone: 613-591-0931
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> On 12-05-29 4:47 PM, "Shoou-Dyi Yeh" <community-noreply@qnx.com> wrote:
> >>
> >> >I am running QNX4.25. The PC has a Broadcom Netlink bcm57780 chip (dev
> >>id
> >> >1692). I used the Net.e1000 driver you provided in post88320 and it
> >>does
> >> >not appear to work. The PC came with two ethernet ports and when I did
> >> >the 'show_pci', it listed two devises, the other one being bcm5761 (dev
> >> >id 1681).
> >> >
> >> >Please provide quidance. Thanks.
> >> >
> >> >
> >> >
> >> >_______________________________________________
> >> >
> >> >Networking Drivers
> >> >http://community.qnx.com/sf/go/post93347
> >> >To cancel your subscription to this discussion, please e-mail
> >> >drivers-networking-unsubscribe@community.qnx.com
> >>
> >
> >
> >
> >
> >
> >
> >_______________________________________________
> >
> >Networking Drivers
> >http://community.qnx.com/sf/go/post93358
> >To cancel your subscription to this discussion, please e-mail
> >drivers-networking-unsubscribe@community.qnx.com
>
|
|
|
Shoou-Dyi Yeh
|
Re: Integrated NIC BCM57780 driver ?
|
Shoou-Dyi Yeh
05/30/2012 9:00 AM
post93372
|
Re: Integrated NIC BCM57780 driver ?
Thank you so much, Hugh!
It works. Now I have a question. I actually have tried another version of Net.bcm57xx and it did not work. I got it from
a coworker and it has a much bigger size (~80KB). Should I use your version for other chipsets that have Broadcom 57xx
series chip?
SD
|
|
|
Hugh Brown
|
Re: Integrated NIC BCM57780 driver ?
|
Hugh Brown
05/30/2012 9:17 AM
post93374
|
Re: Integrated NIC BCM57780 driver ?
No, the Net.bcm57xx driver is for QNX4. The devn-tigon3.so driver is for
all Broadcom 57xx devices under QNX6.
--
Hugh Brown
QNX Software Systems Limited
1001 Farrar Rd.,
Ottawa. ON. K2K 0B3.
Telephone: 613-591-0931
On 12-05-30 9:00 AM, "Shoou-Dyi Yeh" <community-noreply@qnx.com> wrote:
>Thank you so much, Hugh!
>It works. Now I have a question. I actually have tried another version of
>Net.bcm57xx and it did not work. I got it from a coworker and it has a
>much bigger size (~80KB). Should I use your version for other chipsets
>that have Broadcom 57xx series chip?
>
>SD
>
>
>
>_______________________________________________
>
>Networking Drivers
>http://community.qnx.com/sf/go/post93372
>To cancel your subscription to this discussion, please e-mail
>drivers-networking-unsubscribe@community.qnx.com
|
|
|
Shoou-Dyi Yeh
|
Re: Integrated NIC BCM57780 driver ?
|
Shoou-Dyi Yeh
05/31/2012 8:50 AM
post93401
|
Re: Integrated NIC BCM57780 driver ?
Thanks.
For QNX4, your version of Net.bcm57xx, instead of other versions, is the one to use for these ships going forward?
|
|
|
Hugh Brown
|
Re: Integrated NIC BCM57780 driver ?
|
Hugh Brown
05/31/2012 10:43 AM
post93406
|
Re: Integrated NIC BCM57780 driver ?
Yes, this is the driver for QNX4 systems with the BCM57xx chipsets.
--
Hugh Brown
QNX Software Systems Limited
1001 Farrar Rd.,
Ottawa. ON. K2K 0B3.
Telephone: 613-591-0931
On 12-05-31 8:50 AM, "Shoou-Dyi Yeh" <community-noreply@qnx.com> wrote:
>Thanks.
>
>For QNX4, your version of Net.bcm57xx, instead of other versions, is the
>one to use for these ships going forward?
>
>
>
>_______________________________________________
>
>Networking Drivers
>http://community.qnx.com/sf/go/post93401
>To cancel your subscription to this discussion, please e-mail
>drivers-networking-unsubscribe@community.qnx.com
|
|
|
Shoou-Dyi Yeh
|
RE: Integrated NIC BCM57780 driver ?
|
Shoou-Dyi Yeh
05/31/2012 10:59 AM
post93413
|
RE: Integrated NIC BCM57780 driver ?
Thank you so much, Hugh.
Shoou-Dyi Yeh
Westinghouse Electric Company
1000 Westinghouse Drive
Suite 256
Cranberry Township, PA 16066, USA
Phone: +1 (412) 374-6648
Fax: +1 (724) 940-8542
Cell: +1 (724) 814-7049
Email: yehsd@westinghouse.com
Home Page: www.westinghousenuclear.com
-----Original Message-----
From: Hugh Brown [mailto:hsbrown@qnx.com]
Sent: Thursday, May 31, 2012 10:38 AM
To: drivers-networking@community.qnx.com
Cc: Yeh, Shoou-Dyi
Subject: Re: Integrated NIC BCM57780 driver ?
Yes, this is the driver for QNX4 systems with the BCM57xx chipsets.
--
Hugh Brown
QNX Software Systems Limited
1001 Farrar Rd.,
Ottawa. ON. K2K 0B3.
Telephone: 613-591-0931
On 12-05-31 8:50 AM, "Shoou-Dyi Yeh" <community-noreply@qnx.com> wrote:
>Thanks.
>
>For QNX4, your version of Net.bcm57xx, instead of other versions, is the
>one to use for these ships going forward?
>
>
>
>_______________________________________________
>
>Networking Drivers
>http://community.qnx.com/sf/go/post93401
>To cancel your subscription to this discussion, please e-mail
>drivers-networking-unsubscribe@community.qnx.com
|
|
|
Barry Ju
|
Re: Integrated NIC BCM57780 driver ?
|
Barry Ju
11/29/2012 2:04 PM
post97649
|
Re: Integrated NIC BCM57780 driver ?
Has QNX ported e1000 driver to work with QNX6.3.0?
thanks,
Barry
|
|
|
Hugh Brown
|
Re: Integrated NIC BCM57780 driver ?
|
Hugh Brown
11/29/2012 2:31 PM
post97652
|
Re: Integrated NIC BCM57780 driver ?
We have an e1000 driver for 6.3.0, but what device ID do you have?
On 2012-11-29 2:04 PM, "Barry Ju" <community-noreply@qnx.com> wrote:
>Has QNX ported e1000 driver to work with QNX6.3.0?
>
>thanks,
>
>Barry
>
>
>
>_______________________________________________
>
>Networking Drivers
>http://community.qnx.com/sf/go/post97649
>To cancel your subscription to this discussion, please e-mail
>drivers-networking-unsubscribe@community.qnx.com
|
|
|
Barry Ju
|
Re: Integrated NIC BCM57780 driver ?
|
Barry Ju
12/05/2012 1:17 PM
post97831
|
Re: Integrated NIC BCM57780 driver ?
Hi Hugh,
I need the driver for Intel 82583V ethernet controller device id 0x150C.
thanks,
Barry
|
|
|
Hugh Brown
|
Re: Integrated NIC BCM57780 driver ?
|
Hugh Brown
12/05/2012 1:15 PM
post97832
|
Re: Integrated NIC BCM57780 driver ?
This device is supported by the devnp-e1000.so driver under 6.5.0 SP1.
On 2012-12-05 1:17 PM, "Barry Ju" <community-noreply@qnx.com> wrote:
>Hi Hugh,
>
>I need the driver for Intel 82583V ethernet controller device id 0x150C.
>
>thanks,
>
>Barry
>
>
>
>_______________________________________________
>
>Networking Drivers
>http://community.qnx.com/sf/go/post97831
>To cancel your subscription to this discussion, please e-mail
>drivers-networking-unsubscribe@community.qnx.com
|
|
|
|