|
Mario Charest
03/08/2012 1:40 PM
post91985
|
Is the Intel i350 Network Control supported ? On the road map ? Should I get in touch with our representative ;-)
|
|
|
|
|
|
Hugh Brown
03/08/2012 2:37 PM
post91995
|
No, this device isn't currently supported. I'm not sure when it will be.
--
Hugh Brown
QNX Software Systems Limited
1001 Farrar Rd.,
Ottawa. ON. K2K 0B3.
Telephone: 613-591-0931
On 12-03-08 1:40 PM, "Mario Charest" <community-noreply@qnx.com> wrote:
>
>Is the Intel i350 Network Control supported ? On the road map ? Should I
>get in touch with our representative ;-)
>
>
>
>_______________________________________________
>
>Networking Drivers
>http://community.qnx.com/sf/go/post91985
>
|
|
|
|
|
|
Hugh Brown
03/09/2012 10:11 AM
post92014
|
Mario,
Do you have one of these devices? If so, what is the device ID?
Thanks, Hugh.
--
Hugh Brown
QNX Software Systems Limited
1001 Farrar Rd.,
Ottawa. ON. K2K 0B3.
Telephone: 613-591-0931
On 12-03-08 1:40 PM, "Mario Charest" <community-noreply@qnx.com> wrote:
>
>Is the Intel i350 Network Control supported ? On the road map ? Should I
>get in touch with our representative ;-)
>
>
>
>_______________________________________________
>
>Networking Drivers
>http://community.qnx.com/sf/go/post91985
>
|
|
|
|
|
|
Mario Charest
03/09/2012 10:38 AM
post92017
|
> -----Message d'origine-----
> De : Hugh Brown [mailto:community-noreply@qnx.com]
> Envoyé : 9 mars 2012 10:12
> À : drivers-networking
> Objet : Re: Intel i350
>
> Mario,
>
> Do you have one of these devices? If so, what is the device ID?
>
No I don`t. It`s part of all the new series of motherboards that supermicro has recently released (X9 series). I was
looking at getting an eval kit, but decided not to when you told me there was no driver for it, but if it could be of
any help I could arrange to get one ?
> Thanks, Hugh.
>
> --
> Hugh Brown
> QNX Software Systems Limited
> 1001 Farrar Rd.,
> Ottawa. ON. K2K 0B3.
> Telephone: 613-591-0931
>
>
>
>
>
>
>
> On 12-03-08 1:40 PM, "Mario Charest" <community-noreply@qnx.com>
> wrote:
>
> >
> >Is the Intel i350 Network Control supported ? On the road map ? Should I
> >get in touch with our representative ;-)
> >
> >
> >
> >_______________________________________________
> >
> >Networking Drivers
> >http://community.qnx.com/sf/go/post91985
> >
>
>
>
>
> _______________________________________________
>
> Networking Drivers
> http://community.qnx.com/sf/go/post92014
>
|
|
|
|
|
|
Hugh Brown
03/09/2012 10:41 AM
post92018
|
I have just looked at the latest e1000 driver and it does support the
I350! My bad!
--
Hugh Brown
QNX Software Systems Limited
1001 Farrar Rd.,
Ottawa. ON. K2K 0B3.
Telephone: 613-591-0931
On 12-03-09 10:38 AM, "Mario Charest" <community-noreply@qnx.com> wrote:
>
>
>> -----Message d'origine-----
>> De : Hugh Brown [mailto:community-noreply@qnx.com]
>> Envoyé : 9 mars 2012 10:12
>> À : drivers-networking
>> Objet : Re: Intel i350
>>
>> Mario,
>>
>> Do you have one of these devices? If so, what is the device ID?
>>
>
>No I don`t. It`s part of all the new series of motherboards that
>supermicro has recently released (X9 series). I was looking at getting
>an eval kit, but decided not to when you told me there was no driver for
>it, but if it could be of any help I could arrange to get one ?
>
>> Thanks, Hugh.
>>
>> --
>> Hugh Brown
>> QNX Software Systems Limited
>> 1001 Farrar Rd.,
>> Ottawa. ON. K2K 0B3.
>> Telephone: 613-591-0931
>>
>>
>>
>>
>>
>>
>>
>> On 12-03-08 1:40 PM, "Mario Charest" <community-noreply@qnx.com>
>> wrote:
>>
>> >
>> >Is the Intel i350 Network Control supported ? On the road map ?
>>Should I
>> >get in touch with our representative ;-)
>> >
>> >
>> >
>> >_______________________________________________
>> >
>> >Networking Drivers
>> >http://community.qnx.com/sf/go/post91985
>> >
>>
>>
>>
>>
>> _______________________________________________
>>
>> Networking Drivers
>> http://community.qnx.com/sf/go/post92014
>>
>
>
>
>_______________________________________________
>
>Networking Drivers
>http://community.qnx.com/sf/go/post92017
|
|
|
|
|
|
Mario Charest
03/09/2012 10:51 AM
post92019
|
> -----Message d'origine-----
> De : Hugh Brown [mailto:community-noreply@qnx.com]
> Envoyé : 9 mars 2012 10:42
> À : drivers-networking
> Objet : Re: Intel i350
>
> I have just looked at the latest e1000 driver and it does support the I350! My bad!
Sweet as.
>
> --
> Hugh Brown
> QNX Software Systems Limited
> 1001 Farrar Rd.,
> Ottawa. ON. K2K 0B3.
> Telephone: 613-591-0931
>
>
>
>
>
>
>
> On 12-03-09 10:38 AM, "Mario Charest" <community-noreply@qnx.com>
> wrote:
>
> >
> >
> >> -----Message d'origine-----
> >> De : Hugh Brown [mailto:community-noreply@qnx.com]
> >> Envoyé : 9 mars 2012 10:12
> >> À : drivers-networking
> >> Objet : Re: Intel i350
> >>
> >> Mario,
> >>
> >> Do you have one of these devices? If so, what is the device ID?
> >>
> >
> >No I don`t. It`s part of all the new series of motherboards that
> >supermicro has recently released (X9 series). I was looking at getting
> >an eval kit, but decided not to when you told me there was no driver for
> >it, but if it could be of any help I could arrange to get one ?
> >
> >> Thanks, Hugh.
> >>
> >> --
> >> Hugh Brown
> >> QNX Software Systems Limited
> >> 1001 Farrar Rd.,
> >> Ottawa. ON. K2K 0B3.
> >> Telephone: 613-591-0931
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> On 12-03-08 1:40 PM, "Mario Charest" <community-noreply@qnx.com>
> >> wrote:
> >>
> >> >
> >> >Is the Intel i350 Network Control supported ? On the road map ?
> >>Should I
> >> >get in touch with our representative ;-)
> >> >
> >> >
> >> >
> >> >_______________________________________________
> >> >
> >> >Networking Drivers
> >> >http://community.qnx.com/sf/go/post91985
> >> >
> >>
> >>
> >>
> >>
> >> _______________________________________________
> >>
> >> Networking Drivers
> >> http://community.qnx.com/sf/go/post92014
> >>
> >
> >
> >
> >_______________________________________________
> >
> >Networking Drivers
> >http://community.qnx.com/sf/go/post92017
>
>
>
>
> _______________________________________________
>
> Networking Drivers
> http://community.qnx.com/sf/go/post92018
|
|
|
|
|
|
Mario Charest
09/07/2012 2:41 PM
post95454
|
At the time this post was written, the latest driver I have on hand ( date is 2012/05/03, experimental ) works on that
chipset but the one with SP1 doesn't. It detects the NIC but it always reports a speed of 0 half duplex. But the SP1
driver is data 2012/06/20. Is it because something go broken or the experimental driver has some changes that didn't
make it into SP1?
|
|
|
|
|
|
Hugh Brown
09/07/2012 2:57 PM
post95455
|
Does the attached driver work for you? If not, can you please start the
driver with "verbose=3" and post the sloginfo output.
On 2012-09-07 2:41 PM, "Mario Charest" <community-noreply@qnx.com> wrote:
>
>At the time this post was written, the latest driver I have on hand (
>date is 2012/05/03, experimental ) works on that chipset but the one with
>SP1 doesn't. It detects the NIC but it always reports a speed of 0 half
>duplex. But the SP1 driver is data 2012/06/20. Is it because something
>go broken or the experimental driver has some changes that didn't make it
>into SP1?
>
>
>
>
>
>_______________________________________________
>
>Networking Drivers
>http://community.qnx.com/sf/go/post95454
>To cancel your subscription to this discussion, please e-mail
>drivers-networking-unsubscribe@community.qnx.com
|
|
|
|
|
|
Mario Charest
09/07/2012 3:45 PM
post95456
|
> Does the attached driver work for you? If not, can you please start the
> driver with "verbose=3" and post the sloginfo output.
>
>
Didn't work. Sloginfo ouput attached. Nicinfo shows incoming packets. It's important to note our cisco switch takes
around 30 seconds to auto-negoticate and do some fancy test detection before showing the port as active. Though I'd
mention it in case it could be related.
>
> On 2012-09-07 2:41 PM, "Mario Charest" <community-noreply@qnx.com> wrote:
>
> >
> >At the time this post was written, the latest driver I have on hand (
> >date is 2012/05/03, experimental ) works on that chipset but the one with
> >SP1 doesn't. It detects the NIC but it always reports a speed of 0 half
> >duplex. But the SP1 driver is data 2012/06/20. Is it because something
> >go broken or the experimental driver has some changes that didn't make it
> >into SP1?
> >
> >
> >
> >
> >
> >_______________________________________________
> >
> >Networking Drivers
> >http://community.qnx.com/sf/go/post95454
> >To cancel your subscription to this discussion, please e-mail
> >drivers-networking-unsubscribe@community.qnx.com
>
|
|
|
|
|
|
Hugh Brown
09/10/2012 8:26 AM
post95464
|
Now the thread shows up again! Please try the attached driver and let me
know if it works.
On 2012-09-07 3:45 PM, "Mario Charest" <community-noreply@qnx.com> wrote:
>> Does the attached driver work for you? If not, can you please start the
>> driver with "verbose=3" and post the sloginfo output.
>>
>>
>Didn't work. Sloginfo ouput attached. Nicinfo shows incoming packets.
>It's important to note our cisco switch takes around 30 seconds to
>auto-negoticate and do some fancy test detection before showing the port
>as active. Though I'd mention it in case it could be related.
>
>
>>
>> On 2012-09-07 2:41 PM, "Mario Charest" <community-noreply@qnx.com>
>>wrote:
>>
>> >
>> >At the time this post was written, the latest driver I have on hand (
>> >date is 2012/05/03, experimental ) works on that chipset but the one
>>with
>> >SP1 doesn't. It detects the NIC but it always reports a speed of 0 half
>> >duplex. But the SP1 driver is data 2012/06/20. Is it because something
>> >go broken or the experimental driver has some changes that didn't make
>>it
>> >into SP1?
>> >
>> >
>> >
>> >
>> >
>> >_______________________________________________
>> >
>> >Networking Drivers
>> >http://community.qnx.com/sf/go/post95454
>> >To cancel your subscription to this discussion, please e-mail
>> >drivers-networking-unsubscribe@community.qnx.com
>>
>
>
>
>
>
>
>_______________________________________________
>
>Networking Drivers
>http://community.qnx.com/sf/go/post95456
>To cancel your subscription to this discussion, please e-mail
>drivers-networking-unsubscribe@community.qnx.com
|
|
|
|
|
|
Mario Charest
09/10/2012 9:11 AM
post95465
|
This one is working!
> -----Message d'origine-----
> De : Hugh Brown [mailto:community-noreply@qnx.com]
> Envoyé : 10 septembre 2012 08:25
> À : drivers-networking@community.qnx.com
> Objet : Re: Intel i350
>
> Now the thread shows up again! Please try the attached driver and let me
> know if it works.
>
> On 2012-09-07 3:45 PM, "Mario Charest" <community-noreply@qnx.com>
> wrote:
>
> >> Does the attached driver work for you? If not, can you please start
> >> the driver with "verbose=3" and post the sloginfo output.
> >>
> >>
> >Didn't work. Sloginfo ouput attached. Nicinfo shows incoming packets.
> >It's important to note our cisco switch takes around 30 seconds to
> >auto-negoticate and do some fancy test detection before showing the
> >port as active. Though I'd mention it in case it could be related.
> >
> >
> >>
> >> On 2012-09-07 2:41 PM, "Mario Charest" <community-noreply@qnx.com>
> >>wrote:
> >>
> >> >
> >> >At the time this post was written, the latest driver I have on hand
> >> >( date is 2012/05/03, experimental ) works on that chipset but the
> >> >one
> >>with
> >> >SP1 doesn't. It detects the NIC but it always reports a speed of 0
> >> >half duplex. But the SP1 driver is data 2012/06/20. Is it because
> >> >something go broken or the experimental driver has some changes that
> >> >didn't make
> >>it
> >> >into SP1?
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >_______________________________________________
> >> >
> >> >Networking Drivers
> >> >http://community.qnx.com/sf/go/post95454
> >> >To cancel your subscription to this discussion, please e-mail
> >> >drivers-networking-unsubscribe@community.qnx.com
> >>
> >
> >
> >
> >
> >
> >
> >_______________________________________________
> >
> >Networking Drivers
> >http://community.qnx.com/sf/go/post95456
> >To cancel your subscription to this discussion, please e-mail
> >drivers-networking-unsubscribe@community.qnx.com
>
>
>
>
>
> _______________________________________________
>
> Networking Drivers
> http://community.qnx.com/sf/go/post95464
> To cancel your subscription to this discussion, please e-mail drivers-
> networking-unsubscribe@community.qnx.com
|
|
|
|
|
|
Hugh Brown
09/10/2012 9:13 AM
post95466
|
OK, so there must be a difference between the trunk and 6.5.0 branches.
I'll investigate.
Thanks, Hugh.
On 2012-09-10 9:08 AM, "Mario Charest" <community-noreply@qnx.com> wrote:
>
>This one is working!
>
>> -----Message d'origine-----
>> De : Hugh Brown [mailto:community-noreply@qnx.com]
>> Envoyé : 10 septembre 2012 08:25
>> À : drivers-networking@community.qnx.com
>> Objet : Re: Intel i350
>>
>> Now the thread shows up again! Please try the attached driver and let me
>> know if it works.
>>
>> On 2012-09-07 3:45 PM, "Mario Charest" <community-noreply@qnx.com>
>> wrote:
>>
>> >> Does the attached driver work for you? If not, can you please start
>> >> the driver with "verbose=3" and post the sloginfo output.
>> >>
>> >>
>> >Didn't work. Sloginfo ouput attached. Nicinfo shows incoming packets.
>> >It's important to note our cisco switch takes around 30 seconds to
>> >auto-negoticate and do some fancy test detection before showing the
>> >port as active. Though I'd mention it in case it could be related.
>> >
>> >
>> >>
>> >> On 2012-09-07 2:41 PM, "Mario Charest" <community-noreply@qnx.com>
>> >>wrote:
>> >>
>> >> >
>> >> >At the time this post was written, the latest driver I have on hand
>> >> >( date is 2012/05/03, experimental ) works on that chipset but the
>> >> >one
>> >>with
>> >> >SP1 doesn't. It detects the NIC but it always reports a speed of 0
>> >> >half duplex. But the SP1 driver is data 2012/06/20. Is it because
>> >> >something go broken or the experimental driver has some changes that
>> >> >didn't make
>> >>it
>> >> >into SP1?
>> >> >
>> >> >
>> >> >
>> >> >
>> >> >
>> >> >_______________________________________________
>> >> >
>> >> >Networking Drivers
>> >> >http://community.qnx.com/sf/go/post95454
>> >> >To cancel your subscription to this discussion, please e-mail
>> >> >drivers-networking-unsubscribe@community.qnx.com
>> >>
>> >
>> >
>> >
>> >
>> >
>> >
>> >_______________________________________________
>> >
>> >Networking Drivers
>> >http://community.qnx.com/sf/go/post95456
>> >To cancel your subscription to this discussion, please e-mail
>> >drivers-networking-unsubscribe@community.qnx.com
>>
>>
>>
>>
>>
>> _______________________________________________
>>
>> Networking Drivers
>> http://community.qnx.com/sf/go/post95464
>> To cancel your subscription to this discussion, please e-mail drivers-
>> networking-unsubscribe@community.qnx.com
>
>
>
>
>_______________________________________________
>
>Networking Drivers
>http://community.qnx.com/sf/go/post95465
>To cancel your subscription to this discussion, please e-mail
>drivers-networking-unsubscribe@community.qnx.com
|
|
|
|
|
|
Hugh Brown
09/10/2012 11:08 AM
post95474
|
Please try this one.
Thanks, Hugh.
On 2012-09-10 9:08 AM, "Mario Charest" <community-noreply@qnx.com> wrote:
>
>This one is working!
>
>> -----Message d'origine-----
>> De : Hugh Brown [mailto:community-noreply@qnx.com]
>> Envoyé : 10 septembre 2012 08:25
>> À : drivers-networking@community.qnx.com
>> Objet : Re: Intel i350
>>
>> Now the thread shows up again! Please try the attached driver and let me
>> know if it works.
>>
>> On 2012-09-07 3:45 PM, "Mario Charest" <community-noreply@qnx.com>
>> wrote:
>>
>> >> Does the attached driver work for you? If not, can you please start
>> >> the driver with "verbose=3" and post the sloginfo output.
>> >>
>> >>
>> >Didn't work. Sloginfo ouput attached. Nicinfo shows incoming packets.
>> >It's important to note our cisco switch takes around 30 seconds to
>> >auto-negoticate and do some fancy test detection before showing the
>> >port as active. Though I'd mention it in case it could be related.
>> >
>> >
>> >>
>> >> On 2012-09-07 2:41 PM, "Mario Charest" <community-noreply@qnx.com>
>> >>wrote:
>> >>
>> >> >
>> >> >At the time this post was written, the latest driver I have on hand
>> >> >( date is 2012/05/03, experimental ) works on that chipset but the
>> >> >one
>> >>with
>> >> >SP1 doesn't. It detects the NIC but it always reports a speed of 0
>> >> >half duplex. But the SP1 driver is data 2012/06/20. Is it because
>> >> >something go broken or the experimental driver has some changes that
>> >> >didn't make
>> >>it
>> >> >into SP1?
>> >> >
>> >> >
>> >> >
>> >> >
>> >> >
>> >> >_______________________________________________
>> >> >
>> >> >Networking Drivers
>> >> >http://community.qnx.com/sf/go/post95454
>> >> >To cancel your subscription to this discussion, please e-mail
>> >> >drivers-networking-unsubscribe@community.qnx.com
>> >>
>> >
>> >
>> >
>> >
>> >
>> >
>> >_______________________________________________
>> >
>> >Networking Drivers
>> >http://community.qnx.com/sf/go/post95456
>> >To cancel your subscription to this discussion, please e-mail
>> >drivers-networking-unsubscribe@community.qnx.com
>>
>>
>>
>>
>>
>> _______________________________________________
>>
>> Networking Drivers
>> http://community.qnx.com/sf/go/post95464
>> To cancel your subscription to this discussion, please e-mail drivers-
>> networking-unsubscribe@community.qnx.com
>
>
>
>
>_______________________________________________
>
>Networking Drivers
>http://community.qnx.com/sf/go/post95465
>To cancel your subscription to this discussion, please e-mail
>drivers-networking-unsubscribe@community.qnx.com
|
|
|
|
|
|
Mario Charest
09/10/2012 12:50 PM
post95484
|
This one doesn't work but nicinfo does show proper link speed with some TX and RX packets, but can't see the network
with ping or qnet.
Thanks!
> -----Message d'origine-----
> De : Hugh Brown [mailto:community-noreply@qnx.com]
> Envoyé : 10 septembre 2012 11:06
> À : drivers-networking@community.qnx.com
> Objet : Re: Intel i350
>
> Please try this one.
>
> Thanks, Hugh.
>
>
>
>
> On 2012-09-10 9:08 AM, "Mario Charest" <community-noreply@qnx.com>
> wrote:
>
> >
> >This one is working!
> >
> >> -----Message d'origine-----
> >> De : Hugh Brown [mailto:community-noreply@qnx.com]
> >> Envoyé : 10 septembre 2012 08:25
> >> À : drivers-networking@community.qnx.com
> >> Objet : Re: Intel i350
> >>
> >> Now the thread shows up again! Please try the attached driver and let
> >> me know if it works.
> >>
> >> On 2012-09-07 3:45 PM, "Mario Charest" <community-noreply@qnx.com>
> >> wrote:
> >>
> >> >> Does the attached driver work for you? If not, can you please
> >> >> start the driver with "verbose=3" and post the sloginfo output.
> >> >>
> >> >>
> >> >Didn't work. Sloginfo ouput attached. Nicinfo shows incoming packets.
> >> >It's important to note our cisco switch takes around 30 seconds to
> >> >auto-negoticate and do some fancy test detection before showing the
> >> >port as active. Though I'd mention it in case it could be related.
> >> >
> >> >
> >> >>
> >> >> On 2012-09-07 2:41 PM, "Mario Charest" <community-
> noreply@qnx.com>
> >> >>wrote:
> >> >>
> >> >> >
> >> >> >At the time this post was written, the latest driver I have on
> >> >> >hand ( date is 2012/05/03, experimental ) works on that chipset
> >> >> >but the one
> >> >>with
> >> >> >SP1 doesn't. It detects the NIC but it always reports a speed of
> >> >> >0 half duplex. But the SP1 driver is data 2012/06/20. Is it
> >> >> >because something go broken or the experimental driver has some
> >> >> >changes that didn't make
> >> >>it
> >> >> >into SP1?
> >> >> >
> >> >> >
> >> >> >
> >> >> >
> >> >> >
> >> >> >_______________________________________________
> >> >> >
> >> >> >Networking Drivers
> >> >> >http://community.qnx.com/sf/go/post95454
> >> >> >To cancel your subscription to this discussion, please e-mail
> >> >> >drivers-networking-unsubscribe@community.qnx.com
> >> >>
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >_______________________________________________
> >> >
> >> >Networking Drivers
> >> >http://community.qnx.com/sf/go/post95456
> >> >To cancel your subscription to this discussion, please e-mail
> >> >drivers-networking-unsubscribe@community.qnx.com
> >>
> >>
> >>
> >>
> >>
> >> _______________________________________________
> >>
> >> Networking Drivers
> >> http://community.qnx.com/sf/go/post95464
> >> To cancel your subscription to this discussion, please e-mail
> >> drivers- networking-unsubscribe@community.qnx.com
>...
|
|
|
|
|
|
Hugh Brown
09/11/2012 10:26 AM
post95499
|
How about this one.
Thanks, Hugh.
On 2012-09-10 12:45 PM, "Mario Charest" <community-noreply@qnx.com> wrote:
>
>This one doesn't work but nicinfo does show proper link speed with some
>TX and RX packets, but can't see the network with ping or qnet.
>
>Thanks!
>
>> -----Message d'origine-----
>> De : Hugh Brown [mailto:community-noreply@qnx.com]
>> Envoyé : 10 septembre 2012 11:06
>> À : drivers-networking@community.qnx.com
>> Objet : Re: Intel i350
>>
>> Please try this one.
>>
>> Thanks, Hugh.
>>
>>
>>
>>
>> On 2012-09-10 9:08 AM, "Mario Charest" <community-noreply@qnx.com>
>> wrote:
>>
>> >
>> >This one is working!
>> >
>> >> -----Message d'origine-----
>> >> De : Hugh Brown [mailto:community-noreply@qnx.com]
>> >> Envoyé : 10 septembre 2012 08:25
>> >> À : drivers-networking@community.qnx.com
>> >> Objet : Re: Intel i350
>> >>
>> >> Now the thread shows up again! Please try the attached driver and let
>> >> me know if it works.
>> >>
>> >> On 2012-09-07 3:45 PM, "Mario Charest" <community-noreply@qnx.com>
>> >> wrote:
>> >>
>> >> >> Does the attached driver work for you? If not, can you please
>> >> >> start the driver with "verbose=3" and post the sloginfo output.
>> >> >>
>> >> >>
>> >> >Didn't work. Sloginfo ouput attached. Nicinfo shows incoming
>>packets.
>> >> >It's important to note our cisco switch takes around 30 seconds to
>> >> >auto-negoticate and do some fancy test detection before showing the
>> >> >port as active. Though I'd mention it in case it could be related.
>> >> >
>> >> >
>> >> >>
>> >> >> On 2012-09-07 2:41 PM, "Mario Charest" <community-
>> noreply@qnx.com>
>> >> >>wrote:
>> >> >>
>> >> >> >
>> >> >> >At the time this post was written, the latest driver I have on
>> >> >> >hand ( date is 2012/05/03, experimental ) works on that chipset
>> >> >> >but the one
>> >> >>with
>> >> >> >SP1 doesn't. It detects the NIC but it always reports a speed of
>> >> >> >0 half duplex. But the SP1 driver is data 2012/06/20. Is it
>> >> >> >because something go broken or the experimental driver has some
>> >> >> >changes that didn't make
>> >> >>it
>> >> >> >into SP1?
>> >> >> >
>> >> >> >
>> >> >> >
>> >> >> >
>> >> >> >
>> >> >> >_______________________________________________
>> >> >> >
>> >> >> >Networking Drivers
>> >> >> >http://community.qnx.com/sf/go/post95454
>> >> >> >To cancel your subscription to this discussion, please e-mail
>> >> >> >drivers-networking-unsubscribe@community.qnx.com
>> >> >>
>> >> >
>> >> >
>> >> >
>> >> >
>> >> >
>> >> >
>> >> >_______________________________________________
>> >> >
>> >> >Networking Drivers
>> >> >http://community.qnx.com/sf/go/post95456
>> >> >To cancel your subscription to this...
|
|
|
|
|
|
Mario Charest
09/11/2012 10:57 AM
post95501
|
This one work, if you need to do more testing, don`t hesitate, glad I can help.
> -----Message d'origine-----
> De : Hugh Brown [mailto:community-noreply@qnx.com]
> Envoyé : 11 septembre 2012 10:23
> À : drivers-networking@community.qnx.com
> Objet : Re: Intel i350
>
> How about this one.
>
> Thanks, Hugh.
>
>
>
>
>
> On 2012-09-10 12:45 PM, "Mario Charest" <community-noreply@qnx.com>
> wrote:
>
> >
> >This one doesn't work but nicinfo does show proper link speed with some
> >TX and RX packets, but can't see the network with ping or qnet.
> >
> >Thanks!
> >
> >> -----Message d'origine-----
> >> De : Hugh Brown [mailto:community-noreply@qnx.com]
> >> Envoyé : 10 septembre 2012 11:06
> >> À : drivers-networking@community.qnx.com
> >> Objet : Re: Intel i350
> >>
> >> Please try this one.
> >>
> >> Thanks, Hugh.
> >>
> >>
> >>
> >>
> >> On 2012-09-10 9:08 AM, "Mario Charest" <community-noreply@qnx.com>
> >> wrote:
> >>
> >> >
> >> >This one is working!
> >> >
> >> >> -----Message d'origine-----
> >> >> De : Hugh Brown [mailto:community-noreply@qnx.com]
> >> >> Envoyé : 10 septembre 2012 08:25
> >> >> À : drivers-networking@community.qnx.com
> >> >> Objet : Re: Intel i350
> >> >>
> >> >> Now the thread shows up again! Please try the attached driver and
> >> >> let me know if it works.
> >> >>
> >> >> On 2012-09-07 3:45 PM, "Mario Charest" <community-
> noreply@qnx.com>
> >> >> wrote:
> >> >>
> >> >> >> Does the attached driver work for you? If not, can you please
> >> >> >> start the driver with "verbose=3" and post the sloginfo output.
> >> >> >>
> >> >> >>
> >> >> >Didn't work. Sloginfo ouput attached. Nicinfo shows incoming
> >>packets.
> >> >> >It's important to note our cisco switch takes around 30 seconds
> >> >> >to auto-negoticate and do some fancy test detection before
> >> >> >showing the port as active. Though I'd mention it in case it could be
> related.
> >> >> >
> >> >> >
> >> >> >>
> >> >> >> On 2012-09-07 2:41 PM, "Mario Charest" <community-
> >> noreply@qnx.com>
> >> >> >>wrote:
> >> >> >>
> >> >> >> >
> >> >> >> >At the time this post was written, the latest driver I have on
> >> >> >> >hand ( date is 2012/05/03, experimental ) works on that
> >> >> >> >chipset but the one
> >> >> >>with
> >> >> >> >SP1 doesn't. It detects the NIC but it always reports a speed
> >> >> >> >of
> >> >> >> >0 half duplex. But the SP1 driver is data 2012/06/20. Is it
> >> >> >> >because something go broken or the experimental driver has
> >> >> >> >some changes that didn't make
> >> >> >>it
> >> >> >> >into SP1?
> >> >> >> >
> >> >> >> >
> >> >> >> >
> >> >> >> >
> >> >> >> >
> >> >> >> >_______________________________________________
> >> >>...
View Full Message
|
|
|
|
|
|
Hugh Brown
09/11/2012 11:09 AM
post95502
|
Good news! The changes that I made to the trunk driver were made after the
SP1 release was frozen, so that is why the changes were not in SP1.
Thanks, Hugh.
On 2012-09-11 10:53 AM, "Mario Charest" <community-noreply@qnx.com> wrote:
>
>This one work, if you need to do more testing, don`t hesitate, glad I can
>help.
>
>> -----Message d'origine-----
>> De : Hugh Brown [mailto:community-noreply@qnx.com]
>> Envoyé : 11 septembre 2012 10:23
>> À : drivers-networking@community.qnx.com
>> Objet : Re: Intel i350
>>
>> How about this one.
>>
>> Thanks, Hugh.
>>
>>
>>
>>
>>
>> On 2012-09-10 12:45 PM, "Mario Charest" <community-noreply@qnx.com>
>> wrote:
>>
>> >
>> >This one doesn't work but nicinfo does show proper link speed with some
>> >TX and RX packets, but can't see the network with ping or qnet.
>> >
>> >Thanks!
>> >
>> >> -----Message d'origine-----
>> >> De : Hugh Brown [mailto:community-noreply@qnx.com]
>> >> Envoyé : 10 septembre 2012 11:06
>> >> À : drivers-networking@community.qnx.com
>> >> Objet : Re: Intel i350
>> >>
>> >> Please try this one.
>> >>
>> >> Thanks, Hugh.
>> >>
>> >>
>> >>
>> >>
>> >> On 2012-09-10 9:08 AM, "Mario Charest" <community-noreply@qnx.com>
>> >> wrote:
>> >>
>> >> >
>> >> >This one is working!
>> >> >
>> >> >> -----Message d'origine-----
>> >> >> De : Hugh Brown [mailto:community-noreply@qnx.com]
>> >> >> Envoyé : 10 septembre 2012 08:25
>> >> >> À : drivers-networking@community.qnx.com
>> >> >> Objet : Re: Intel i350
>> >> >>
>> >> >> Now the thread shows up again! Please try the attached driver and
>> >> >> let me know if it works.
>> >> >>
>> >> >> On 2012-09-07 3:45 PM, "Mario Charest" <community-
>> noreply@qnx.com>
>> >> >> wrote:
>> >> >>
>> >> >> >> Does the attached driver work for you? If not, can you please
>> >> >> >> start the driver with "verbose=3" and post the sloginfo output.
>> >> >> >>
>> >> >> >>
>> >> >> >Didn't work. Sloginfo ouput attached. Nicinfo shows incoming
>> >>packets.
>> >> >> >It's important to note our cisco switch takes around 30 seconds
>> >> >> >to auto-negoticate and do some fancy test detection before
>> >> >> >showing the port as active. Though I'd mention it in case it
>>could be
>> related.
>> >> >> >
>> >> >> >
>> >> >> >>
>> >> >> >> On 2012-09-07 2:41 PM, "Mario Charest" <community-
>> >> noreply@qnx.com>
>> >> >> >>wrote:
>> >> >> >>
>> >> >> >> >
>> >> >> >> >At the time this post was written, the latest driver I have on
>> >> >> >> >hand ( date is 2012/05/03, experimental ) works on that
>> >> >> >> >chipset but the one
>> >> >> >>with
>> >> >> >> >SP1 doesn't. It detects the NIC but it always reports a speed
>> >> >> >> >of
>> >> >> >> >0 half...
View Full Message
|
|
|
|
|
|
