Hugh Brown
10/26/2011 7:29 AM
post89638
|
If it still hangs with the e1000 driver that I sent you, then there is
something else wrong, as that driver works on PPC platforms.
Have you tried different interrupts?
--
Hugh Brown
QNX Software Systems Limited
175 Terence Matthews Crescent,
Ottawa. ON. K2M 1W8.
Telephone: 613-591-0931
On 11-10-25 6:33 PM, "Joe Krachey" <community-noreply@qnx.com> wrote:
>We have a MPC7448 card with an Intel 82546 network controller. When we
>attempt to connect to a BCM5396 Ethernet switch, the system hangs ( no
>more serial data anyways). This is how we bring the interface up:
>
>io-net -d mv64360 memrange=0xf1000000,deviceindex=0,verbose=4 -d mv64360
> memrange=0xf1000000,deviceindex=1,verbose=4 -d i82544
> duplex=1,speed=1000 -ptcpip
>
>
>
>We are using Neutrino 6.3.2 along withService Pack 3 Network Drivers
>Patch (Patch ID 685). Are there any newer updates to devn-i82544.so for
>6.3.x?
>
>Our Neutrino port was working correctly until our chassis vendor updated
>the network switch.
>We have confirmed that the hardware is functional with our linux port
>for this card.
>
>Thanks
>Joe Krachey
>
>
>
>
>_______________________________________________
>
>Networking Drivers
>http://community.qnx.com/sf/go/post89622
>
|
|
|