Mark Dowdy(deleted)
|
Trouble with devnp-i82544 in QNX 6.5.0
|
Mark Dowdy(deleted)
09/01/2011 10:13 PM
post88611
|
Trouble with devnp-i82544 in QNX 6.5.0
I'm having trouble mounting the devnp-i82544 driver in QNX 6.5.0.
MID-1# ls /alt
ls: No such file or directory (/alt)
MID-1# io-pkt-v4-hc -i1 -ptcpip prefix=/alt
MID-1# mount -Tio-pkt1 -opci=0,vid=0x8086,did=0x1076,priority=32,mac=0082FFBFFFA F devnp-i82544.so
MID-1# SOCK=/alt ifconfig
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 33192
inet 127.0.0.1 netmask 0xff000000
MID-1# SOCK=/alt ifconfig
ifconfig: getifaddrs: Address family not supported by protocol family
Any idea what's going on here? The commands all seem pretty straightforward. FWIW, the legacy devn-i82544 driver mounts
just fine.
If you're wondering, yes, the specified device does exist.
MID-1# pci
PCI version = 2.10
Class = Display (VGA)
Vendor ID = 8086h, Intel Corporation
Device ID = 3582h, 82852/855GM Integrated Graphics Device
PCI index = 0h
BAR - 0 [Mem] = f0000000h enabled
BAR - 1 [Mem] = ffa80000h enabled
BAR - 2 [I/O] = ec00h enabled
PCI Int Pin = INT A
Interrupt line = 9
CPU Interrupt = 9h
Class = Display (Other)
Vendor ID = 8086h, Intel Corporation
Device ID = 3582h, 82852/855GM Integrated Graphics Device
PCI index = 1h
BAR - 0 [Mem] = e8000000h enabled
BAR - 1 [Mem] = ffa00000h enabled
PCI Int Pin = NC
Interrupt line = 0
CPU Interrupt = 0h
Class = Mass Storage (IDE)
Vendor ID = 8086h, Intel Corporation
Device ID = 24cbh, 82801DB (ICH4) IDE Controller
PCI index = 0h
BAR - 0 [I/O] = 0h enabled
BAR - 1 [I/O] = 0h enabled
BAR - 2 [I/O] = 0h enabled
BAR - 3 [I/O] = 0h enabled
BAR - 4 [I/O] = fc00h enabled
BAR - 5 [Mem] = ffeffc00h enabled
PCI Int Pin = INT A
Interrupt line = 0
CPU Interrupt = 0h
Class = Multimedia (Audio)
Vendor ID = 8086h, Intel Corporation
Device ID = 24c5h, 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller
PCI index = 0h
BAR - 0 [I/O] = e800h enabled
BAR - 1 [I/O] = e400h enabled
BAR - 2 [Mem] = ff9ffc00h enabled
BAR - 3 [Mem] = ff9ff800h enabled
PCI Int Pin = INT B
Interrupt line = 5
CPU Interrupt = 5h
Class = Multimedia (Other)
Vendor ID = 10b5h, PLX Technology, Inc.
Device ID = 9030h, PCI9030 32-bit 33MHz PCI <-> IOBus Bridge
PCI index = 0h
BAR - 0 [Mem] = ff7ffc00h enabled
BAR - 2 [Mem] = ff600000h enabled
BAR - 3 [Mem] = ff500000h enabled
PCI Int Pin = INT A
Interrupt line = 9
CPU Interrupt = 9h
Class = Network (Ethernet)
Vendor ID = 8086h, Intel Corporation
Device ID = 1209h, 8255xER/82551IT Fast Ethernet Controller
PCI index = 0h
BAR - 0 [Mem] = ff7fe000h enabled
BAR - 1 [I/O] = dc00h enabled
BAR - 2 [Mem] = ff7c0000h enabled
PCI Int Pin = INT A
Interrupt line = 7
CPU Interrupt = 7h
Class = Network (Ethernet)
Vendor ID = 8086h, Intel Corporation
Device ID = 1076h, 82541GI Gigabit Ethernet Controller
PCI index = 0h
BAR - 0 [Mem] = ff7a0000h enabled
BAR - 2 [I/O] = d800h enabled
PCI Int Pin = INT A
Interrupt line = 6
CPU Interrupt = 6h
Thanks.
Mark
|
|
|