Hi, I'm trying to get some Realtek NICs to work in 6.41. or 6.5. The boards I'm using are both 8111B and 8111C. They are not listed in the hardware list. How do I get them to work? Thanks
The rtl8169 driver should work with these devices. If not, I will require the 'pci -v' output from your machines. On 10-08-23 4:06 PM, "Martin Rudloff" <community-noreply@qnx.com> wrote: > Hi, > I'm trying to get some Realtek NICs to work in 6.41. or 6.5. The boards I'm > using are both 8111B and 8111C. They are not listed in the hardware list. How > do I get them to work? > > Thanks > > > > _______________________________________________ > > Networking Drivers > http://community.qnx.com/sf/go/post64003 > -- Hugh Brown (613) 591-0931 ext. 2209 (voice) QNX Software Systems Ltd. (613) 591-3579 (fax) 175 Terence Matthews Cres. email: hsbrown@qnx.com Kanata, Ontario, Canada. K2M 1W8
Hugh, How do I know this driver is loaded, or how do I load it to test? -----Original Message----- From: Hugh Brown [mailto:community-noreply@qnx.com] Sent: Monday, August 23, 2010 3:11 PM To: drivers-networking Subject: Re: Realtek 8111 Family The rtl8169 driver should work with these devices. If not, I will require the 'pci -v' output from your machines. On 10-08-23 4:06 PM, "Martin Rudloff" <community-noreply@qnx.com> wrote: > Hi, > I'm trying to get some Realtek NICs to work in 6.41. or 6.5. The > boards I'm using are both 8111B and 8111C. They are not listed in the > hardware list. How do I get them to work? > > Thanks > > > > _______________________________________________ > > Networking Drivers > http://community.qnx.com/sf/go/post64003 > -- Hugh Brown (613) 591-0931 ext. 2209 (voice) QNX Software Systems Ltd. (613) 591-3579 (fax) 175 Terence Matthews Cres. email: hsbrown@qnx.com Kanata, Ontario, Canada. K2M 1W8 _______________________________________________ Networking Drivers http://community.qnx.com/sf/go/post64004
Sorry, It was a hardware issue, I got it to work on both 6.4.1 and 6.5.0 Thanks
