foundry27 : Post

Forum Topic - external scanner info generator: (5 Items)

View: as

Mario Charest

12/16/2008 11:26 AM

post18722

With a C/C++ project with our own makefiles, every time I lauch a make I get 

Error launching external scanner info generator (gcc -E -P -v -dD  ... )

I tried disabling the Automated discovery of paths and symbols in the project setting but to no avail.

I've seen in other post that it's about the platform not being defined but since this is C/C++ project and not a QNX 
project that doesn't apply does it?

Elena Laskavaia

12/16/2008 11:40 AM

post18724

Re: external scanner info generator

What is toolchain for these projects and what IDE version is it?

Mario Charest wrote:
> With a C/C++ project with our own makefiles, every time I lauch a make I get 
> 
> Error launching external scanner info generator (gcc -E -P -v -dD  ... )
> 
> I tried disabling the Automated discovery of paths and symbols in the project setting but to no avail.
> 
> I've seen in other post that it's about the platform not being defined but since this is C/C++ project and not a QNX 
project that doesn't apply does it?
> 
> 
> 
> 
> 
> 
> 
> 
> _______________________________________________
> General
> http://community.qnx.com/sf/go/post18722
>

Mario Charest

12/16/2008 11:42 AM

post18726

RE: external scanner info generator

6.4.0 configured to use 6.3.2. The tool chain ( as seen in the tool chain editor ) is QNX QCC. The builder is GNU Make 
Builder.  If I click on the "Select Tools button" in the Tool chain editor , the Used tools windows shows QCC Compiler 
and QCC Assembler in red, with the error message "Tool is incompatible with the current configuration"

> -----Original Message-----
> From: Elena Laskavaia [mailto:community-noreply@qnx.com]
> Sent: December-16-08 11:40 AM
> To: general-ide
> Subject: Re: external scanner info generator
> 
> What is toolchain for these projects and what IDE version is it?
> 
> Mario Charest wrote:
> > With a C/C++ project with our own makefiles, every time I lauch a
> make I get
> >
> > Error launching external scanner info generator (gcc -E -P -v -dD
> ... )
> >
> > I tried disabling the Automated discovery of paths and symbols in the
> project setting but to no avail.
> >
> > I've seen in other post that it's about the platform not being
> defined but since this is C/C++ project and not a QNX project that
> doesn't apply does it?
> >
> >

Alex Chapiro

12/16/2008 1:49 PM

post18738

Re: external scanner info generator

Could not reproduce your problem. Could you please send you makefile.. 
Also interesting to know the content of your Environment and Variables 
(check Show System Variables) pages?

Alex


On 16/12/2008 11:42 AM, Mario Charest wrote:
> 6.4.0 configured to use 6.3.2. The tool chain ( as seen in the tool chain editor ) is QNX QCC. The builder is GNU Make
 Builder.  If I click on the "Select Tools button" in the Tool chain editor , the Used tools windows shows QCC Compiler 
and QCC Assembler in red, with the error message "Tool is incompatible with the current configuration"
>
>
>    
>> -----Original Message-----
>> From: Elena Laskavaia [mailto:community-noreply@qnx.com]
>> Sent: December-16-08 11:40 AM
>> To: general-ide
>> Subject: Re: external scanner info generator
>>
>> What is toolchain for these projects and what IDE version is it?
>>
>> Mario Charest wrote:
>>      
>>> With a C/C++ project with our own makefiles, every time I lauch a
>>>        
>> make I get
>>      
>>> Error launching external scanner info generator (gcc -E -P -v -dD
>>>        
>> ... )
>>      
>>> I tried disabling the Automated discovery of paths and symbols in the
>>>        
>> project setting but to no avail.
>>      
>>> I've seen in other post that it's about the platform not being
>>>        
>> defined but since this is C/C++ project and not a QNX project that
>> doesn't apply does it?
>>      
>>>        
>
>
> _______________________________________________
> General
> http://community.qnx.com/sf/go/post18726
>
>

Mario Charest

12/16/2008 1:58 PM

post18739

RE: external scanner info generator

I attached the .* files/directory as well as the makefile related stuff.

As for the Show System Variable, anyway to export them, there are LOTS of variable.  I did my best by capturing a screen
 shot.

> -----Original Message-----
> From: Alex Chapiro [mailto:community-noreply@qnx.com]
> Sent: December-16-08 1:49 PM
> To: general-ide
> Subject: Re: external scanner info generator
> 
> Could not reproduce your problem. Could you please send you makefile..
> Also interesting to know the content of your Environment and Variables
> (check Show System Variables) pages?

> 
> Alex
> 
> 
> On 16/12/2008 11:42 AM, Mario Charest wrote:
> > 6.4.0 configured to use 6.3.2. The tool chain ( as seen in the tool
> chain editor ) is QNX QCC. The builder is GNU Make Builder.  If I click
> on the "Select Tools button" in the Tool chain editor , the Used tools
> windows shows QCC Compiler and QCC Assembler in red, with the error
> message "Tool is incompatible with the current configuration"
> >
> >
> >
> >> -----Original Message-----
> >> From: Elena Laskavaia [mailto:community-noreply@qnx.com]
> >> Sent: December-16-08 11:40 AM
> >> To: general-ide
> >> Subject: Re: external scanner info generator
> >>
> >> What is toolchain for these projects and what IDE version is it?
> >>
> >> Mario Charest wrote:
> >>
> >>> With a C/C++ project with our own makefiles, every time I lauch a
> >>>
> >> make I get
> >>
> >>> Error launching external scanner info generator (gcc -E -P -v -dD
> >>>
> >> ... )
> >>
> >>> I tried disabling the Automated discovery of paths and symbols in
> the
> >>>
> >> project setting but to no avail.
> >>
> >>> I've seen in other post that it's about the platform not being
> >>>
> >> defined but since this is C/C++ project and not a QNX project that
> >> doesn't apply does it?
> >>
> >>>
> >
> >
> > _______________________________________________
> > General
> > http://community.qnx.com/sf/go/post18726
> >
> >
> 
> 
> _______________________________________________
> General
> http://community.qnx.com/sf/go/post18738
>

Attachment:

logc.7z 12.24 KB

var2.jpg 212.01 KB

var1.jpg 192.73 KB

Return

The text you entered is not a valid object ID
More Information
Object IDs begin with an object prefix and end with a number. For example, if you enter
artf2345
the application will jump directly to an artifact with the ID artf2345. Some valid object prefixes are:
artf	for an artifact
doc	for a document
page	for a project page
topc	for a discussion topic
wiki	for a wiki page