Florian Kosch(deleted)
|
Re: Flickering display: only one of two buffers gets filled.
|
Florian Kosch(deleted)
06/23/2014 5:43 AM
post110811
|
Re: Flickering display: only one of two buffers gets filled.
Thank you for your reply,
it was indeed a driver problem.
I found that one of my parameters in the LCD configuration file was wrong.
Those settings do work with the 4DCAPE-43 (T):
# devg-omapl1xx.so parameters for tailoring to specific boards and display modes:
hsw=41,hfp=8,hbp=47,vsw=10,vfp=3,vbp=9,lpp=298,syncc=1,synce=0,ivs=1,ihs=1,ipc=0,bias=0,acb=0,acbi=0,pcd=22,type=1,lcdx=
480,lcdy=272,irq=36,refresh=60,display=lcd
Good luck for anyone using this display,
Florian
|
|
|