|
Marcel Meerstetter
12/10/2009 5:26 PM
post43590
|
Hello there,
is there a Forum for the Aviage HMI Suite or Adobe flash light? I would like to get some more information.
Thank you
Marcel
|
|
|
|
|
|
Paul Streatch
12/10/2009 10:13 PM
post43599
|
Yes, there is an HMI Framework F27 project (and forums) for Aviage HMI
users.
Regards,
Paul
-----Original Message-----
From: Marcel Meerstetter [mailto:community-noreply@qnx.com]
Sent: December 10, 2009 5:27 PM
To: advanced-graphics
Subject: Aviage HMI
Hello there,
is there a Forum for the Aviage HMI Suite or Adobe flash light? I would
like to get some more information.
Thank you
Marcel
_______________________________________________
Advanced Graphics
http://community.qnx.com/sf/go/post43590
|
|
|
|
|
|
jipin jose
01/05/2010 7:02 AM
post44551
|
Hi
I don't find any separate forum for qnx Aviage HMI Suite . Could you please tell me the exact location of the forum
? I have lot of queries about qnx Aviage HMI Suite .
|
|
|
|
|
|
Roger Maclean
01/05/2010 8:43 AM
post44559
|
The forum for the HMI Suite is in the HMI Framework project.
|
|
|
|
|
|
Princy K V
04/09/2010 6:32 AM
post51360
|
can you please provide the link to HMI framwork forum?
|
|
|
|
|
|
Roger Maclean
04/09/2010 5:15 PM
post51419
|
|
|
|
|
|
|
Princy K V
04/11/2010 10:58 PM
post51442
|
Hi,
I gets following error,
"The page you requested cannot be found.
If you feel you have received this message in error, please contact the
TeamForge administrator."
Please do the necessary to access the forum.
Regards,
Princy
-----Original Message-----
From: Roger Maclean [mailto:community-noreply@qnx.com]
Sent: Saturday, April 10, 2010 2:45 AM
To: advanced-graphics
Subject: Re: Aviage HMI
http://community.qnx.com/sf/discussion/do/listForums/projects.hmi_framew
ork/
discussion
_______________________________________________
Advanced Graphics
http://community.qnx.com/sf/go/post51419
***** Confidentiality Statement/Disclaimer *****
This message and any attachments is intended for the sole use of the intended recipient. It may contain confidential
information. Any unauthorized use, dissemination or modification is strictly prohibited. If you are not the intended
recipient, please notify the sender immediately then delete it from all your systems, and do not copy, use or print.
Internet communications are not secure and it is the responsibility of the recipient to make sure that it is virus/
malicious code exempt.
The company/sender cannot be responsible for any unauthorized alterations or modifications made to the contents. If you
require any form of confirmation of the contents, please contact the company/sender. The company/sender is not liable
for any errors or omissions in the content of this message.
|
|
|
|
|
|
Paul Streatch
04/12/2010 8:17 AM
post51462
|
You need to be a member of the HMI Framework project to have access to
this forum.
> -----Original Message-----
> From: Princy K V [mailto:community-noreply@qnx.com]
> Sent: April 11, 2010 10:58 PM
> To: advanced-graphics
> Subject: RE: Aviage HMI
>
> Hi,
> I gets following error,
>
> "The page you requested cannot be found.
> If you feel you have received this message in error, please contact
the
> TeamForge administrator."
>
> Please do the necessary to access the forum.
>
> Regards,
> Princy
> -----Original Message-----
> From: Roger Maclean [mailto:community-noreply@qnx.com]
> Sent: Saturday, April 10, 2010 2:45 AM
> To: advanced-graphics
> Subject: Re: Aviage HMI
>
>
http://community.qnx.com/sf/discussion/do/listForums/projects.hmi_framew
> ork/
> discussion
>
>
>
>
> _______________________________________________
>
> Advanced Graphics
> http://community.qnx.com/sf/go/post51419
>
> ***** Confidentiality Statement/Disclaimer *****
>
> This message and any attachments is intended for the sole use of the
intended
> recipient. It may contain confidential information. Any unauthorized
use,
> dissemination or modification is strictly prohibited. If you are not
the intended
> recipient, please notify the sender immediately then delete it from
all your
> systems, and do not copy, use or print. Internet communications are
not
> secure and it is the responsibility of the recipient to make sure that
it is
> virus/malicious code exempt.
> The company/sender cannot be responsible for any unauthorized
alterations
> or modifications made to the contents. If you require any form of
confirmation
> of the contents, please contact the company/sender. The company/sender
is
> not liable for any errors or omissions in the content of this message.
>
>
>
> _______________________________________________
>
> Advanced Graphics
> http://community.qnx.com/sf/go/post51442
|
|
|
|
|
|
Princy K V
04/13/2010 1:05 AM
post51501
|
It is not listed in Foundry_27 projects. How do I join in HMI Framework
project?
Regards,
Princy
-----Original Message-----
From: Paul Streatch [mailto:community-noreply@qnx.com]
Sent: Monday, April 12, 2010 5:48 PM
To: advanced-graphics
Subject: RE: Aviage HMI
You need to be a member of the HMI Framework project to have access to
this forum.
> -----Original Message-----
> From: Princy K V [mailto:community-noreply@qnx.com]
> Sent: April 11, 2010 10:58 PM
> To: advanced-graphics
> Subject: RE: Aviage HMI
>
> Hi,
> I gets following error,
>
> "The page you requested cannot be found.
> If you feel you have received this message in error, please contact
the
> TeamForge administrator."
>
> Please do the necessary to access the forum.
>
> Regards,
> Princy
> -----Original Message-----
> From: Roger Maclean [mailto:community-noreply@qnx.com]
> Sent: Saturday, April 10, 2010 2:45 AM
> To: advanced-graphics
> Subject: Re: Aviage HMI
>
>
http://community.qnx.com/sf/discussion/do/listForums/projects.hmi_framew
> ork/
> discussion
>
>
>
>
> _______________________________________________
>
> Advanced Graphics
> http://community.qnx.com/sf/go/post51419
>
> ***** Confidentiality Statement/Disclaimer *****
>
> This message and any attachments is intended for the sole use of the
intended
> recipient. It may contain confidential information. Any unauthorized
use,
> dissemination or modification is strictly prohibited. If you are not
the intended
> recipient, please notify the sender immediately then delete it from
all your
> systems, and do not copy, use or print. Internet communications are
not
> secure and it is the responsibility of the recipient to make sure that
it is
> virus/malicious code exempt.
> The company/sender cannot be responsible for any unauthorized
alterations
> or modifications made to the contents. If you require any form of
confirmation
> of the contents, please contact the company/sender. The company/sender
is
> not liable for any errors or omissions in the content of this message.
>
>
>
> _______________________________________________
>
> Advanced Graphics
> http://community.qnx.com/sf/go/post51442
_______________________________________________
Advanced Graphics
http://community.qnx.com/sf/go/post51462
***** Confidentiality Statement/Disclaimer *****
This message and any attachments is intended for the sole use of the intended recipient. It may contain confidential
information. Any unauthorized use, dissemination or modification is strictly prohibited. If you are not the intended
recipient, please notify the sender immediately then delete it from all your systems, and do not copy, use or print.
Internet communications are not secure and it is the responsibility of the recipient to make sure that it is virus/
malicious code exempt.
The company/sender cannot be responsible for any unauthorized alterations or modifications made to the contents. If you
require any form of confirmation of the contents, please contact the company/sender. The company/sender is not liable
for any errors or omissions in the content of this message.
|
|
|
|
|
|
Mate Szarvas
04/13/2010 1:56 AM
post51508
|
> It is not listed in Foundry_27 projects.
It is listed in Foundry 27 projects, 8th entry on this page:
http://community.qnx.com/sf/sfmain/do/listProjects?_pagenum=2
> How do I join in HMI Framework project?
You select the "Join this Project" GUI element near the upper left of
this page, then follow the instructions:
http://community.qnx.com/sf/projects/hmi_framework
-----Original Message-----
From: Princy K V [mailto:community-noreply@qnx.com]
Sent: April 13, 2010 2:06 PM
To: advanced-graphics
Subject: RE: Aviage HMI
It is not listed in Foundry_27 projects. How do I join in HMI Framework
project?
Regards,
Princy
-----Original Message-----
From: Paul Streatch [mailto:community-noreply@qnx.com]
Sent: Monday, April 12, 2010 5:48 PM
To: advanced-graphics
Subject: RE: Aviage HMI
You need to be a member of the HMI Framework project to have access to
this forum.
> -----Original Message-----
> From: Princy K V [mailto:community-noreply@qnx.com]
> Sent: April 11, 2010 10:58 PM
> To: advanced-graphics
> Subject: RE: Aviage HMI
>
> Hi,
> I gets following error,
>
> "The page you requested cannot be found.
> If you feel you have received this message in error, please contact
the
> TeamForge administrator."
>
> Please do the necessary to access the forum.
>
> Regards,
> Princy
> -----Original Message-----
> From: Roger Maclean [mailto:community-noreply@qnx.com]
> Sent: Saturday, April 10, 2010 2:45 AM
> To: advanced-graphics
> Subject: Re: Aviage HMI
>
>
http://community.qnx.com/sf/discussion/do/listForums/projects.hmi_framew
> ork/
> discussion
|
|
|
|
|
|
Princy K V
04/13/2010 2:16 AM
post51510
|
>>It is listed in Foundry 27 projects, 8th entry on this page:
>>http://community.qnx.com/sf/sfmain/do/listProjects?_pagenum=2
Can you please name the 8th entry? It seems it is dependent on sorting
order of the entries.
Regards,
Princy
-----Original Message-----
From: Mate Szarvas [mailto:community-noreply@qnx.com]
Sent: Tuesday, April 13, 2010 11:27 AM
To: advanced-graphics
Subject: RE: Aviage HMI
> It is not listed in Foundry_27 projects.
It is listed in Foundry 27 projects, 8th entry on this page:
http://community.qnx.com/sf/sfmain/do/listProjects?_pagenum=2
> How do I join in HMI Framework project?
You select the "Join this Project" GUI element near the upper left of
this page, then follow the instructions:
http://community.qnx.com/sf/projects/hmi_framework
-----Original Message-----
From: Princy K V [mailto:community-noreply@qnx.com]
Sent: April 13, 2010 2:06 PM
To: advanced-graphics
Subject: RE: Aviage HMI
It is not listed in Foundry_27 projects. How do I join in HMI Framework
project?
Regards,
Princy
-----Original Message-----
From: Paul Streatch [mailto:community-noreply@qnx.com]
Sent: Monday, April 12, 2010 5:48 PM
To: advanced-graphics
Subject: RE: Aviage HMI
You need to be a member of the HMI Framework project to have access to
this forum.
> -----Original Message-----
> From: Princy K V [mailto:community-noreply@qnx.com]
> Sent: April 11, 2010 10:58 PM
> To: advanced-graphics
> Subject: RE: Aviage HMI
>
> Hi,
> I gets following error,
>
> "The page you requested cannot be found.
> If you feel you have received this message in error, please contact
the
> TeamForge administrator."
>
> Please do the necessary to access the forum.
>
> Regards,
> Princy
> -----Original Message-----
> From: Roger Maclean [mailto:community-noreply@qnx.com]
> Sent: Saturday, April 10, 2010 2:45 AM
> To: advanced-graphics
> Subject: Re: Aviage HMI
>
>
http://community.qnx.com/sf/discussion/do/listForums/projects.hmi_framew
> ork/
> discussion
_______________________________________________
Advanced Graphics
http://community.qnx.com/sf/go/post51508
***** Confidentiality Statement/Disclaimer *****
This message and any attachments is intended for the sole use of the intended recipient. It may contain confidential
information. Any unauthorized use, dissemination or modification is strictly prohibited. If you are not the intended
recipient, please notify the sender immediately then delete it from all your systems, and do not copy, use or print.
Internet communications are not secure and it is the responsibility of the recipient to make sure that it is virus/
malicious code exempt.
The company/sender cannot be responsible for any unauthorized alterations or modifications made to the contents. If you
require any form of confirmation of the contents, please contact the company/sender. The company/sender is not liable
for any errors or omissions in the content of this message.
|
|
|
|
|
|
Mate Szarvas
04/13/2010 2:30 AM
post51511
|
It appears that the list of projects you get depends on your login ID.
I can confirm that using another ID I can see a list of 24 projects and
"HMI Framework" is not among them.
Also, using my "another ID" I cannot access the link I cited:
http://community.qnx.com/sf/projects/hmi_framework
This may be the result of a recent change in QNX policies?
Perhaps this is just a temporary issue or someone else can give you
further advice.
-----Original Message-----
From: Princy K V [mailto:community-noreply@qnx.com]
Sent: April 13, 2010 3:16 PM
To: advanced-graphics
Subject: RE: Aviage HMI
>>It is listed in Foundry 27 projects, 8th entry on this page:
>>http://community.qnx.com/sf/sfmain/do/listProjects?_pagenum=2
Can you please name the 8th entry? It seems it is dependent on sorting
order of the entries.
Regards,
Princy
-----Original Message-----
From: Mate Szarvas [mailto:community-noreply@qnx.com]
Sent: Tuesday, April 13, 2010 11:27 AM
To: advanced-graphics
Subject: RE: Aviage HMI
> It is not listed in Foundry_27 projects.
It is listed in Foundry 27 projects, 8th entry on this page:
http://community.qnx.com/sf/sfmain/do/listProjects?_pagenum=2
> How do I join in HMI Framework project?
You select the "Join this Project" GUI element near the upper left of
this page, then follow the instructions:
http://community.qnx.com/sf/projects/hmi_framework
-----Original Message-----
From: Princy K V [mailto:community-noreply@qnx.com]
Sent: April 13, 2010 2:06 PM
To: advanced-graphics
Subject: RE: Aviage HMI
It is not listed in Foundry_27 projects. How do I join in HMI Framework
project?
Regards,
Princy
-----Original Message-----
From: Paul Streatch [mailto:community-noreply@qnx.com]
Sent: Monday, April 12, 2010 5:48 PM
To: advanced-graphics
Subject: RE: Aviage HMI
You need to be a member of the HMI Framework project to have access to
this forum.
> -----Original Message-----
> From: Princy K V [mailto:community-noreply@qnx.com]
> Sent: April 11, 2010 10:58 PM
> To: advanced-graphics
> Subject: RE: Aviage HMI
>
> Hi,
> I gets following error,
>
> "The page you requested cannot be found.
> If you feel you have received this message in error, please contact
the
> TeamForge administrator."
>
> Please do the necessary to access the forum.
>
> Regards,
> Princy
> -----Original Message-----
> From: Roger Maclean [mailto:community-noreply@qnx.com]
> Sent: Saturday, April 10, 2010 2:45 AM
> To: advanced-graphics
> Subject: Re: Aviage HMI
>
>
http://community.qnx.com/sf/discussion/do/listForums/projects.hmi_framew
> ork/
> discussion
|
|
|
|
|
|
Paul Streatch
04/13/2010 9:24 AM
post51551
|
The HMI Framework project is a semi-private project, so it's not visible
by default for non members.
Princy, since I see that you are a customer working directly with the
technology you will be given access to the project shortly.
Regards,
Paul
> -----Original Message-----
> From: Mate Szarvas [mailto:community-noreply@qnx.com]
> Sent: April 13, 2010 2:31 AM
> To: advanced-graphics
> Subject: RE: Aviage HMI
>
> It appears that the list of projects you get depends on your login ID.
> I can confirm that using another ID I can see a list of 24 projects
and
> "HMI Framework" is not among them.
>
> Also, using my "another ID" I cannot access the link I cited:
> http://community.qnx.com/sf/projects/hmi_framework
>
>
> This may be the result of a recent change in QNX policies?
>
> Perhaps this is just a temporary issue or someone else can give you
> further advice.
>
>
> -----Original Message-----
> From: Princy K V [mailto:community-noreply@qnx.com]
> Sent: April 13, 2010 3:16 PM
> To: advanced-graphics
> Subject: RE: Aviage HMI
>
> >>It is listed in Foundry 27 projects, 8th entry on this page:
> >>http://community.qnx.com/sf/sfmain/do/listProjects?_pagenum=2
> Can you please name the 8th entry? It seems it is dependent on sorting
> order of the entries.
>
> Regards,
> Princy
>
> -----Original Message-----
> From: Mate Szarvas [mailto:community-noreply@qnx.com]
> Sent: Tuesday, April 13, 2010 11:27 AM
> To: advanced-graphics
> Subject: RE: Aviage HMI
>
> > It is not listed in Foundry_27 projects.
>
> It is listed in Foundry 27 projects, 8th entry on this page:
> http://community.qnx.com/sf/sfmain/do/listProjects?_pagenum=2
>
>
> > How do I join in HMI Framework project?
>
> You select the "Join this Project" GUI element near the upper left of
> this page, then follow the instructions:
> http://community.qnx.com/sf/projects/hmi_framework
>
>
> -----Original Message-----
> From: Princy K V [mailto:community-noreply@qnx.com]
> Sent: April 13, 2010 2:06 PM
> To: advanced-graphics
> Subject: RE: Aviage HMI
>
> It is not listed in Foundry_27 projects. How do I join in HMI
Framework
> project?
>
> Regards,
> Princy
> -----Original Message-----
> From: Paul Streatch [mailto:community-noreply@qnx.com]
> Sent: Monday, April 12, 2010 5:48 PM
> To: advanced-graphics
> Subject: RE: Aviage HMI
>
> You need to be a member of the HMI Framework project to have access to
> this forum.
>
> > -----Original Message-----
> > From: Princy K V [mailto:community-noreply@qnx.com]
> > Sent: April 11, 2010 10:58 PM
> > To: advanced-graphics
> > Subject: RE: Aviage HMI
> >
> > Hi,
> > I gets following error,
> >
> > "The page you requested cannot be found.
> > If you feel you have received this message in error, please contact
> the
> > TeamForge administrator."
> >
> > Please do the necessary to access the forum.
> >
> > Regards,
> > Princy
> > -----Original Message-----
> > From: Roger Maclean [mailto:community-noreply@qnx.com]
> > Sent: Saturday, April 10, 2010 2:45 AM
> > To: advanced-graphics
> > Subject: Re: Aviage HMI
> >
> >
>
http://community.qnx.com/sf/discussion/do/listForums/projects.hmi_framew
> > ork/
> > discussion
>
>
>
>
> _______________________________________________
>
> Advanced Graphics
> http://community.qnx.com/sf/go/post51511
|
|
|
|
|
|
Princy K V
04/13/2010 11:09 PM
post51625
|
Thank you.. I could access the forum now.
Regards,
Princy
-----Original Message-----
From: Paul Streatch [mailto:community-noreply@qnx.com]
Sent: Tuesday, April 13, 2010 6:54 PM
To: advanced-graphics
Subject: RE: Aviage HMI
The HMI Framework project is a semi-private project, so it's not visible
by default for non members.
Princy, since I see that you are a customer working directly with the
technology you will be given access to the project shortly.
Regards,
Paul
> -----Original Message-----
> From: Mate Szarvas [mailto:community-noreply@qnx.com]
> Sent: April 13, 2010 2:31 AM
> To: advanced-graphics
> Subject: RE: Aviage HMI
>
> It appears that the list of projects you get depends on your login ID.
> I can confirm that using another ID I can see a list of 24 projects
and
> "HMI Framework" is not among them.
>
> Also, using my "another ID" I cannot access the link I cited:
> http://community.qnx.com/sf/projects/hmi_framework
>
>
> This may be the result of a recent change in QNX policies?
>
> Perhaps this is just a temporary issue or someone else can give you
> further advice.
>
>
> -----Original Message-----
> From: Princy K V [mailto:community-noreply@qnx.com]
> Sent: April 13, 2010 3:16 PM
> To: advanced-graphics
> Subject: RE: Aviage HMI
>
> >>It is listed in Foundry 27 projects, 8th entry on this page:
> >>http://community.qnx.com/sf/sfmain/do/listProjects?_pagenum=2
> Can you please name the 8th entry? It seems it is dependent on sorting
> order of the entries.
>
> Regards,
> Princy
>
> -----Original Message-----
> From: Mate Szarvas [mailto:community-noreply@qnx.com]
> Sent: Tuesday, April 13, 2010 11:27 AM
> To: advanced-graphics
> Subject: RE: Aviage HMI
>
> > It is not listed in Foundry_27 projects.
>
> It is listed in Foundry 27 projects, 8th entry on this page:
> http://community.qnx.com/sf/sfmain/do/listProjects?_pagenum=2
>
>
> > How do I join in HMI Framework project?
>
> You select the "Join this Project" GUI element near the upper left of
> this page, then follow the instructions:
> http://community.qnx.com/sf/projects/hmi_framework
>
>
> -----Original Message-----
> From: Princy K V [mailto:community-noreply@qnx.com]
> Sent: April 13, 2010 2:06 PM
> To: advanced-graphics
> Subject: RE: Aviage HMI
>
> It is not listed in Foundry_27 projects. How do I join in HMI
Framework
> project?
>
> Regards,
> Princy
> -----Original Message-----
> From: Paul Streatch [mailto:community-noreply@qnx.com]
> Sent: Monday, April 12, 2010 5:48 PM
> To: advanced-graphics
> Subject: RE: Aviage HMI
>
> You need to be a member of the HMI Framework project to have access to
> this forum.
>
> > -----Original Message-----
> > From: Princy K V [mailto:community-noreply@qnx.com]
> > Sent: April 11, 2010 10:58 PM
> > To: advanced-graphics
> > Subject: RE: Aviage HMI
> >
> > Hi,
> > I gets following error,
> >
> > "The page you requested cannot be found.
> > If you feel you have received this message in error, please contact
> the
> > TeamForge administrator."
> >
> > Please do the necessary to access the forum.
> >
> > Regards,
> > Princy
> > -----Original Message-----
> > From: Roger Maclean [mailto:community-noreply@qnx.com]
> > Sent: Saturday, April 10, 2010 2:45 AM
> > To: advanced-graphics
> > Subject: Re: Aviage HMI
> >
> >
>
http://community.qnx.com/sf/discussion/do/listForums/projects.hmi_framew
> > ork/
> > discussion
>
>
>
>
>...
View Full Message
|
|
|
|
|
|
