Hi Marc,

We currently don't have support (and it is not planned) for the MPC8313E RDB. I did a quick demo for our sales team but 
it had only serial and networking driver. The networking driver had some issue and it could only work with the first 
interface.

I can't say if we are going to release it as this time.

Regards,

Nicolas Gagnon

Hmmm ... Not good signs ...


----Original Message----
From: Nicolas Gagnon [mailto:ngagnon@qnx.com]
Sent: Tuesday, June 10, 2008 6:11 PM
To: ostech-core_os
Subject: Re: QNX Support for MPC8313

> Hi Marc,
> 
> We currently don't have support (and it is not planned) for the
> MPC8313E RDB. I did a quick demo for our sales team but it had only
> serial and networking driver. The networking driver had some issue
> and it could only work with the first interface.   
> 
> I can't say if we are going to release it as this time.
> 
> Regards,
> 
> Nicolas Gagnon
> 

----Original Message----
From: Marc Roessler [mailto:marc.roessler@solectrix.de]
Sent: Tuesday, June 10, 2008 4:46 PM
To: ostech-core_os
Subject: QNX Support for MPC8313

> Hi,
> 
> we have a MPC8313 CPU. At the moment we are using it on a Freescale
> MPC8313-RDB Eval Board. 
> 
> Is there any QNX Support for this? I have not found any signs of 8313
> support so far, but I've read other posts here that seem to indicate
> some people use this CPU with QNX. If it supported, how complete is
> the support?   
> 
> Greetings,
>  Marc
> 
> _______________________________________________
> OSTech
> http://community.qnx.com/sf/go/post8905