Project Home
Project Home
Documents
Documents
Wiki
Wiki
Discussion Forums
Discussions
Project Information
Project Info
Forum Topic - Unable to access /dev/hd0t179: (3 Items)
   
Unable to access /dev/hd0t179  
Hi there:

We are banging our heads a bit here with this problem. We are trying to install Neutriono on a x86. 

When we boot from CD, everything is fine. Internet connection and everything is perfectly fine.

Now, we want to install Neutrino on the hard drive, everything works fine until we get the message that says:

"Mounting Filesystems ...
Unable to access /dev/hd0t179"

Note that if we boot a partition editor, the installer has
created a type 179 partition. 

We did quite a bit of research, and learned we needed to make modifications to our partition, which we did. But then we 
still have this nagging problem.

Could someone point us in the right direction?
Re: Unable to access /dev/hd0t179  
Hello,

What is your QNX version ? Because I run some tests with QNX 6.5 M9 and tried to install it on a second partition of my 
disk and I get exactly the same error.

Then I also expect a solution for that problem.

Christophe
Re: Unable to access /dev/hd0t179  
Hi Christophe:

We are attempting to install the latest version (6.4.1).

Steve

On 2010-04-27 03:20, Christophe Hannoyer wrote:
> Hello,
>
> What is your QNX version ? Because I run some tests with QNX 6.5 M9 and tried to install it on a second partition of 
my disk and I get exactly the same error.
>
> Then I also expect a solution for that problem.
>
> Christophe
>
>
>
> _______________________________________________
>
> OSMeta
> http://community.qnx.com/sf/go/post52852
>
>
>