kumar bhatia
|
Re: Unable to start in graphics mode with QNX 7
|
kumar bhatia
03/29/2018 4:23 PM
post118727
|
Re: Unable to start in graphics mode with QNX 7
Hello. Was about to start drinking alcoholic beverages (I don't drink) and thought to email QNX. They prompted reply
with the following info which we must have missed...courtesy of Dennis Kelly of QNX:
Hi Kumar-
>>> VMWare which is yielding a black screen only upon launch with ./etc/graphics-startup.sh
The VMware image is behaving normally.
You must note the IP address (use ifconfIg) prior to starting graphics script. Then, use putty in Windows to connect to
the IP address of the VMware image and login as user “qnxuser” and password “qnxuser”. (Once you start graphics
it clears the screen and you cannot use the PC console any longer.) To prove graphics is working, run “gles2-gears”.
>> We will try this asap and post our results. Thanks for everyone for their assistance and hoping this will get us
moving. From what we have seen, there is no stand alone ISO image for this version of the OS. QNX 7 is based on the
VMWare platform which is fine, once it works for us :)
|
|
|