Project Home
Project Home		 Trackers
Trackers		 Documents
Documents		 Wiki
Wiki		 Discussion Forums
Discussions		 Project Information
Project Info
Community/Discussion/QNX4 Community Support (EOL)/Net.bcm57xx wouldnt work in GigE mode/List of Posts
Forum Topic - Net.bcm57xx wouldnt work in GigE mode: (9 Items)
   
Update
dave allamby(deleted)
02/11/2009 6:47 PM
post22055
Net.bcm57xx wouldnt work in GigE mode   
Using QNX on Dell PowerEdge 860. Can't get Net.bcm57xx driver to set 
ethernet to 1000 Mb, best it will do is 100 Mb FD.
Anyone have a work around ?

Dave
Hugh Brown
02/12/2009 7:40 AM
post22072
RE: Net.bcm57xx wouldnt work in GigE mode   
Please try the attached version and let me know if it solves the
problem. If not, I will need the output from 'show_pci -v'.

Thanks.

-----Original Message-----
From: dave allamby [mailto:community-noreply@qnx.com] 
Sent: Wednesday, February 11, 2009 6:47 PM
To: qnx4-community
Subject: Net.bcm57xx wouldnt work in GigE mode

Using QNX on Dell PowerEdge 860. Can't get Net.bcm57xx driver to set 
ethernet to 1000 Mb, best it will do is 100 Mb FD.
Anyone have a work around ?

Dave




_______________________________________________
QNX4 Community Support
http://community.qnx.com/sf/go/post22055
Attachment: Text Net.bcm57xx 78.83 KB
dave allamby(deleted)
02/13/2009 1:55 PM
post22260
Re: RE: Net.bcm57xx wouldnt work in GigE mode   
Hugh,

Thanks for the quick response. 
The new driver did not work.

Here is the information
Dell 860 connected to a LinkSys SRW2016 v1.2 GigE switch
Net.bcm57xx  -I0 -l1 -M &

Output on screen (handcopied...sorry)
PCI-EXpress card (4101)!
cpuspeed 1844 - bias 16 -features 734
bus 5 -devfn 0 -port fx4f0000
i/o port fe6f0000
interrupt 5
active phy 5750
link down
buffer stuck at 248!
link up (100bT FD)


Thanks
Dave
Attachment: Text show_pci_dell860.txt 18.94 KB
Hugh Brown
02/17/2009 8:24 AM
post22337
RE: RE: Net.bcm57xx wouldnt work in GigE mode   
Please try the attached debug version of the driver and let me know what
it displays on the screen. It should either display "Set Advert xx" or
"No GB advert". Also, if you force the speed and duplex, does it then
work at gigabit speed?

Thanks, Hugh.

-----Original Message-----
From: dave allamby [mailto:community-noreply@qnx.com] 
Sent: Friday, February 13, 2009 1:55 PM
To: qnx4-community
Subject: Re: RE: Net.bcm57xx wouldnt work in GigE mode

Hugh,

Thanks for the quick response. 
The new driver did not work.

Here is the information
Dell 860 connected to a LinkSys SRW2016 v1.2 GigE switch
Net.bcm57xx  -I0 -l1 -M &

Output on screen (handcopied...sorry)
PCI-EXpress card (4101)!
cpuspeed 1844 - bias 16 -features 734
bus 5 -devfn 0 -port fx4f0000
i/o port fe6f0000
interrupt 5
active phy 5750
link down
buffer stuck at 248!
link up (100bT FD)


Thanks
Dave




_______________________________________________
QNX4 Community Support
http://community.qnx.com/sf/go/post22260
Attachment: Text Net.bcm57xx 48.78 KB
dave allamby(deleted)
02/17/2009 1:11 PM
post22371
Re: RE: RE: Net.bcm57xx wouldnt work in GigE mode   
Hugh

Says
Set advert 300
an enable

Also went to 1000 bT FD by itself
Both broadcomm ethernet ports set correctly
I have 4 machines, doing flood ping of 1500 bytes over the GigE from 3 machines to 1 common machine resulted in 15000 
packets / sec xmit and recv
for 180 Mb/sec xmit and rcvr rates


Dave
Hugh Brown
02/17/2009 1:14 PM
post22372
RE: RE: RE: Net.bcm57xx wouldnt work in GigE mode   
Dave,

So are you saying that the driver is working correctly? If so, I will
removed the debug and send you a new driver.

Hugh,

-----Original Message-----
From: dave allamby [mailto:community-noreply@qnx.com] 
Sent: Tuesday, February 17, 2009 1:11 PM
To: qnx4-community
Subject: Re: RE: RE: Net.bcm57xx wouldnt work in GigE mode

Hugh

Says
Set advert 300
an enable

Also went to 1000 bT FD by itself
Both broadcomm ethernet ports set correctly
I have 4 machines, doing flood ping of 1500 bytes over the GigE from 3
machines to 1 common machine resulted in 15000 packets / sec xmit and
recv
for 180 Mb/sec xmit and rcvr rates


Dave


_______________________________________________
QNX4 Community Support
http://community.qnx.com/sf/go/post22371
dave allamby(deleted)
02/17/2009 2:41 PM
post22379
Re: RE: RE: RE: Net.bcm57xx wouldnt work in GigE mode   
Hugh,

Yes, driver looks like it is working quite well. 

Thanks
Dave
dave allamby(deleted)
02/17/2009 2:41 PM
post22380
Re: RE: RE: RE: Net.bcm57xx wouldnt work in GigE mode   
Do have a question
What does warning "buffer stuck at 248!!" mean ?
Hugh Brown
02/17/2009 2:50 PM
post22382
RE: RE: RE: RE: Net.bcm57xx wouldnt work in GigE mode   
There is a bug on the Broadcom chips where the receive buffer sticks
only once after initialization and has to be un-stuck! The message is
just a warning. Here is the non-debug driver.


-----Original Message-----
From: dave allamby [mailto:community-noreply@qnx.com] 
Sent: Tuesday, February 17, 2009 2:42 PM
To: qnx4-community
Subject: Re: RE: RE: RE: Net.bcm57xx wouldnt work in GigE mode

Do have a question
What does warning "buffer stuck at 248!!" mean ?



_______________________________________________
QNX4 Community Support
http://community.qnx.com/sf/go/post22380
Attachment: Text Net.bcm57xx 48.68 KB

Return


  A subsidiary of BlackBerry             All content ©2004-2013, QNX Software Systems