Pekka Tuusjärvi(deleted)
10/23/2014 5:28 AM
post112125
|
Hi,
im trying to use MOXA PCI serial card with Fsys.ahci. I have tried different MOXA PCI products but anyone hasnt worked.
After I rebuild the OS image with Fsys.ahci the Dev.ser command frozens my PC. Although if I return to normal Fsys.ata
the PCI-card works normally. Also everything else works perfectly with Fsys.ahci.
The performance of Fsys.ata is so lame that I need to get this work. Any ideas?
|
|
|
Pavel Kozlov(deleted)
10/24/2014 8:22 AM
post112141
|
Hi Pekka,
If the MOXA PCI serial card and the AHCI SATA controller share one
interrupt line it is possible that the Dev.ser driver loops forever in
the interrupt handler. I've faced such problem once but with very old
Dev.ser driver.
Please attach show_pci -v and sin ar, sin ver, sin ir output.
Regards,
Pavel
23.10.2014 13:28, Pekka Tuusjärvi:
> Hi,
>
> im trying to use MOXA PCI serial card with Fsys.ahci. I have tried different MOXA PCI products but anyone hasnt worked
. After I rebuild the OS image with Fsys.ahci the Dev.ser command frozens my PC. Although if I return to normal Fsys.ata
the PCI-card works normally. Also everything else works perfectly with Fsys.ahci.
>
> The performance of Fsys.ata is so lame that I need to get this work. Any ideas?
>
>
>
> _______________________________________________
>
> QNX4 Community Support
> http://community.qnx.com/sf/go/post112125
> To cancel your subscription to this discussion, please e-mail qnx4-community-unsubscribe@community.qnx.com
>
|
|
|
Pekka Tuusjärvi(deleted)
10/24/2014 8:45 AM
post112143
|
Hi Pavel,
here is the pci.txt.
> Hi Pekka,
>
> If the MOXA PCI serial card and the AHCI SATA controller share one
> interrupt line it is possible that the Dev.ser driver loops forever in
> the interrupt handler. I've faced such problem once but with very old
> Dev.ser driver.
> Please attach show_pci -v and sin ar, sin ver, sin ir output.
>
> Regards,
> Pavel
>
> 23.10.2014 13:28, Pekka Tuusjärvi:
> > Hi,
> >
> > im trying to use MOXA PCI serial card with Fsys.ahci. I have tried different
> MOXA PCI products but anyone hasnt worked. After I rebuild the OS image with
> Fsys.ahci the Dev.ser command frozens my PC. Although if I return to normal
> Fsys.ata the PCI-card works normally. Also everything else works perfectly
> with Fsys.ahci.
> >
> > The performance of Fsys.ata is so lame that I need to get this work. Any
> ideas?
> >
> >
> >
> > _______________________________________________
> >
> > QNX4 Community Support
> > http://community.qnx.com/sf/go/post112125
> > To cancel your subscription to this discussion, please e-mail qnx4-community
> -unsubscribe@community.qnx.com
> >
>
|
|
|
Pekka Tuusjärvi(deleted)
10/24/2014 8:46 AM
post112144
|
|
|
|
Pekka Tuusjärvi(deleted)
10/24/2014 8:47 AM
post112145
|
|
|
|
Pekka Tuusjärvi(deleted)
10/24/2014 8:47 AM
post112146
|
|
|
|
Pavel Kozlov(deleted)
10/24/2014 9:50 AM
post112147
|
Thanks for info.
You have a configuration where Net, AHCI and Dev.ser share one interrupt
line.
As an experiment try to run the Dev.ser driver before the Fsys.ahci
(include and run Dev and Dev.ser from your OS image).
I'll try to reproduce this issue too.
Regards,
Pavel
24.10.2014 16:45, Pekka Tuusjärvi:
> Hi Pavel,
>
> here is the pci.txt.
>
>
>
>> Hi Pekka,
>>
>> If the MOXA PCI serial card and the AHCI SATA controller share one
>> interrupt line it is possible that the Dev.ser driver loops forever in
>> the interrupt handler. I've faced such problem once but with very old
>> Dev.ser driver.
>> Please attach show_pci -v and sin ar, sin ver, sin ir output.
>>
>> Regards,
>> Pavel
>>
>> 23.10.2014 13:28, Pekka Tuusjärvi:
>>> Hi,
>>>
>>> im trying to use MOXA PCI serial card with Fsys.ahci. I have tried different
>> MOXA PCI products but anyone hasnt worked. After I rebuild the OS image with
>> Fsys.ahci the Dev.ser command frozens my PC. Although if I return to normal
>> Fsys.ata the PCI-card works normally. Also everything else works perfectly
>> with Fsys.ahci.
>>> The performance of Fsys.ata is so lame that I need to get this work. Any
>> ideas?
>>>
>>>
>>> _______________________________________________
>>>
>>> QNX4 Community Support
>>> http://community.qnx.com/sf/go/post112125
>>> To cancel your subscription to this discussion, please e-mail qnx4-community
>> -unsubscribe@community.qnx.com
>
>
>
>
>
> _______________________________________________
>
> QNX4 Community Support
> http://community.qnx.com/sf/go/post112143
> To cancel your subscription to this discussion, please e-mail qnx4-community-unsubscribe@community.qnx.com
|
|
|
Pavel Kozlov(deleted)
10/27/2014 8:47 AM
post112170
|
Hi Pekka,
I'm trying to reproduce your problem...
For more accurate results please attach sin ir output for your
configuration with Fsys.ata.
Regards,
Pavel
24.10.2014 17:50, Pavel Kozlov:
> Thanks for info.
> You have a configuration where Net, AHCI and Dev.ser share one
> interrupt line.
> As an experiment try to run the Dev.ser driver before the Fsys.ahci
> (include and run Dev and Dev.ser from your OS image).
>
> I'll try to reproduce this issue too.
>
> Regards,
> Pavel
>
>
> 24.10.2014 16:45, Pekka Tuusjärvi:
>> Hi Pavel,
>>
>> here is the pci.txt.
>>
>>
>>
>>> Hi Pekka,
>>>
>>> If the MOXA PCI serial card and the AHCI SATA controller share one
>>> interrupt line it is possible that the Dev.ser driver loops forever in
>>> the interrupt handler. I've faced such problem once but with very old
>>> Dev.ser driver.
>>> Please attach show_pci -v and sin ar, sin ver, sin ir output.
>>>
>>> Regards,
>>> Pavel
>>>
>>> 23.10.2014 13:28, Pekka Tuusjärvi:
>>>> Hi,
>>>>
>>>> im trying to use MOXA PCI serial card with Fsys.ahci. I have tried
>>>> different
>>> MOXA PCI products but anyone hasnt worked. After I rebuild the OS
>>> image with
>>> Fsys.ahci the Dev.ser command frozens my PC. Although if I return to
>>> normal
>>> Fsys.ata the PCI-card works normally. Also everything else works
>>> perfectly
>>> with Fsys.ahci.
>>>> The performance of Fsys.ata is so lame that I need to get this
>>>> work. Any
>>> ideas?
>>>>
>>>>
>>>> _______________________________________________
>>>>
>>>> QNX4 Community Support
>>>> http://community.qnx.com/sf/go/post112125
>>>> To cancel your subscription to this discussion, please e-mail
>>>> qnx4-community
>>> -unsubscribe@community.qnx.com
>>
>>
>>
>>
>>
>> _______________________________________________
>>
>> QNX4 Community Support
>> http://community.qnx.com/sf/go/post112143
>> To cancel your subscription to this discussion, please e-mail
>> qnx4-community-unsubscribe@community.qnx.com
>
|
|
|
Pekka Tuusjärvi(deleted)
10/28/2014 2:57 AM
post112187
|
Hi Pavel,
here is the sin ir with Fsys.ata.
|
|
|
Oleg Bolshakov
11/05/2014 4:17 AM
post112274
|
Hi Pekka,
We have reproduced your issue here. We're working on this issue. When the fix will be prepared, I'll let you know.
Respectfully,
Oleg
28 окт. 2014 г., в 9:57:54, Pekka Tuusjärvi <community-noreply@qnx.com> написал:
> Hi Pavel,
>
> here is the sin ir with Fsys.ata.
>
>
>
> _______________________________________________
>
> QNX4 Community Support
> http://community.qnx.com/sf/go/post112187
> To cancel your subscription to this discussion, please e-mail qnx4-community-unsubscribe@community.qnx.com
> <sin_ir.txt>
|
|
|
Pekka Tuusjärvi(deleted)
12/01/2014 6:52 AM
post112488
|
Hi!
Any news on this one?
|
|
|
Oleg Bolshakov
12/01/2014 8:53 AM
post112489
|
Hi Pekka,
I remember this issue. Unfortunately, the fix is not ready yet.
Respectfully,
Oleg
01 дек. 2014 г., в 14:52:36, Pekka Tuusjärvi <community-noreply@qnx.com> написал:
> Hi!
>
> Any news on this one?
>
>
>
> _______________________________________________
>
> QNX4 Community Support
> http://community.qnx.com/sf/go/post112488
> To cancel your subscription to this discussion, please e-mail qnx4-community-unsubscribe@community.qnx.com
|
|
|
Vladimir Makhilev
12/19/2014 3:54 AM
post112747
|
Hi Pekka,
Please try attached Dev.ser driver.
cksum Dev.ser.tar.gz
3280607655 15535 Dev.ser.tar.gz
--
With best regards,
Vladimir
|
|
|
Vladimir Makhilev
12/19/2014 4:02 AM
post112748
|
Also please try attached Fsys.ahci driver.
This version checks interrupt status in interrupt handler and if it's not an ahci
interrupt it skips it without masking/unmasking the interrupt.
cksum Fsys.ahci.tar.gz
3556589980 82115 Fsys.ahci.tar.gz
--
With best regards,
Vladimir
|
|
|
Pekka Tuusjärvi(deleted)
01/05/2015 4:04 PM
post112829
|
Thank you very much. I will try when I get back to my office. :)
|
|
|
Pekka Tuusjärvi(deleted)
01/14/2015 8:01 AM
post112933
|
Hello, I get archive is corrupt error If i try to extract archive?
|
|
|
Vladimir Makhilev
01/14/2015 8:33 AM
post112934
|
Hi Pekka,
Seems like both archives are broken.
Please try attached Dev.ser driver
cksum Dev.ser
1146694106 29093 Dev.ser
--
Best regards,
Vladimir
|
|
|
Vladimir Makhilev
01/14/2015 8:45 AM
post112935
|
And
Fsys.ahci driver
cksum Fsys.ahci
2031912476 145562 Fsys.ahci
|
|
|
Oleg Bolshakov
01/14/2015 9:30 AM
post112937
|
Hi Pekka!
Unfortunately, it seems like community portal engine issue. All tar.gz archives are downloading double gzipped. To
unpack double gzipped archive you should ungzip it twice:
$ zcat Fsys.ahci.tar.gz | zcat | tar xf
Or you can fix downloaded archive:
$ zcat Fsys.ahci.tar.gz > Fsys.ahci_fixed.tar.gz
I recommend using archives to transfer files. In this case file attributes are preserved.
Respectfully,
Oleg
14 янв. 2015 г., в 16:01:52, Pekka Tuusjärvi <community-noreply@qnx.com> написал:
> Hello, I get archive is corrupt error If i try to extract archive?
>
>
>
> _______________________________________________
>
> QNX4 Community Support
> http://community.qnx.com/sf/go/post112933
> To cancel your subscription to this discussion, please e-mail qnx4-community-unsubscribe@community.qnx.com
|
|
|
Pekka Tuusjärvi(deleted)
01/20/2015 1:58 AM
post113001
|
> Hi Pekka!
>
> Unfortunately, it seems like community portal engine issue. All tar.gz
> archives are downloading double gzipped. To unpack double gzipped archive you
> should ungzip it twice:
>
> $ zcat Fsys.ahci.tar.gz | zcat | tar xf
>
> Or you can fix downloaded archive:
>
> $ zcat Fsys.ahci.tar.gz > Fsys.ahci_fixed.tar.gz
>
> I recommend using archives to transfer files. In this case file attributes are
> preserved.
>
> Respectfully,
> Oleg
>
> 14 янв. 2015 г., в 16:01:52, Pekka Tuusjärvi <community-noreply@qnx.com> написал:
>
> > Hello, I get archive is corrupt error If i try to extract archive?
> >
> >
> >
> > _______________________________________________
> >
> > QNX4 Community Support
> > http://community.qnx.com/sf/go/post112933
> > To cancel your subscription to this discussion, please e-mail qnx4-community
> -unsubscribe@community.qnx.com
>
Hi and thanks for the info. The fix seems to work fine in my test pc. So big thanks everyone who participated to fix
this problem.
|
|
|
|