Project Home
Project Home		 Trackers
Trackers		 Documents
Documents		 Wiki
Wiki		 Discussion Forums
Discussions		 Project Information
Project Info
Community/Discussion/QNX4 Community Support (EOL)/SATA Drives.../List of Posts
Forum Topic - SATA Drives...: (7 Items)
   
Update
Victor Gamboa
10/29/2012 7:46 PM
post96695
SATA Drives...   
Hi! The Fsys.atapi still can´t "see" the Sata Drives whitout need to put Legacy on BIOS ? Is there any new Fsys.atapi 
driver that works with the new motherboards of procesors LGA 115 ? I really appreciate your help, I am updating an QNX4 
CPU but I am having compatibility problems with the Fsys.atapi driver. Thanks for any help....
Pavel Kozlov(deleted)
10/30/2012 10:30 AM
post96702
Re: SATA Drives...   
Hi Victor,

With the Fsys.atapi nothing has changed.
But you can try the Fsys.ahci driver.
This driver is available from the Latest Software Updates page:
http://community.qnx.com/sf/wiki/do/viewPage/projects.qnx4/wiki/LatestSoftwareUpdates
Don't forget to configure your SATA to the AHCI mode in BIOS.

Regards,
Pavel

30.10.2012 03:46, Victor Gamboa:
> Hi! The Fsys.atapi still can´t "see" the Sata Drives whitout need to put Legacy on BIOS ? Is there any new Fsys.atapi
 driver that works with the new motherboards of procesors LGA 115 ? I really appreciate your help, I am updating an QNX4
 CPU but I am having compatibility problems with the Fsys.atapi driver. Thanks for any help....
>
>
>
>
>
>
> _______________________________________________
>
> QNX4 Community Support
> http://community.qnx.com/sf/go/post96695
> To cancel your subscription to this discussion, please e-mail qnx4-community-unsubscribe@community.qnx.com
Victor Gamboa
10/30/2012 7:49 PM
post96705
Re: SATA Drives...   
Thanks for your answer Pavel. I download the Fsys.ahci driver frome the site, I made the boot file and copy to .boot, I 
change on BIOS to AHCI, but when QNX boots I get the next messege: /bin/Fsys.ahci terminated (SIGSEGV) at 00D1:00000439 
and the /dev/hd0 can´t be mounted. Do you have any suggestions ?
Victor
Pavel Kozlov(deleted)
10/31/2012 9:35 AM
post96715
Re: SATA Drives...   
Hi Victor,

Try the latest Proc32 with -E0 option.

For more information:
http://community.qnx.com/sf/wiki/do/viewPage/projects.qnx4/wiki/InstallationNotesForProc32

Regards,
Pavel

31.10.2012 03:49, Victor Gamboa:
> Thanks for your answer Pavel. I download the Fsys.ahci driver frome the site, I made the boot file and copy to .boot, 
I change on BIOS to AHCI, but when QNX boots I get the next messege: /bin/Fsys.ahci terminated (SIGSEGV) at 00D1:
00000439 and the /dev/hd0 can´t be mounted. Do you have any suggestions ?
> Victor
>
>
>
> _______________________________________________
>
> QNX4 Community Support
> http://community.qnx.com/sf/go/post96705
> To cancel your subscription to this discussion, please e-mail qnx4-community-unsubscribe@community.qnx.com
Victor Gamboa
03/22/2013 8:34 PM
post100115
Re: SATA Drives...   
Thanks Pavel, it works fine. Thnaks a lot....
Victor Gamboa
03/26/2013 6:44 PM
post100187
Re: SATA Drives...   
With the AHCI on the BIOS and the Fsys.ahci boot fine. But I have one little problem, QNX only "see" 2 hard drivers, I 
have installed 3 hard driver, the Bios "see" it, but QNX only see the first 2 hard drives. Any suggestions to "see" the 
third or the fourth hard drive ? I really appreciate any suggestion.
Pavel Kozlov(deleted)
04/03/2013 9:02 AM
post100287
Re: SATA Drives...   
Hi Victor,

It's quite strange, the Fsys.ahci driver supports up to 32 ports (hard
drives).
Run the Fsys.ahci driver with the increased verbosity level:
# Fsys.ahci ahci verbose=6
You should see how many SATA ports and hard drives are detected and may
be driver will report some errors.

What system board you are using?
Also provide show_pci -vv output.

Regards,
Pavel


> With the AHCI on the BIOS and the Fsys.ahci boot fine. But I have one little problem, QNX only "see" 2 hard drivers, I
 have installed 3 hard driver, the Bios "see" it, but QNX only see the first 2 hard drives. Any suggestions to "see" the
 third or the fourth hard drive ? I really appreciate any suggestion.
>
>
>
> _______________________________________________
>
> QNX4 Community Support
> http://community.qnx.com/sf/go/post100187
> To cancel your subscription to this discussion, please e-mail qnx4-community-unsubscribe@community.qnx.com
>

Return


  A subsidiary of BlackBerry             All content ©2004-2013, QNX Software Systems