Hugh Brown
|
Re: 82574L Gigabit Ethernet chip and Net.e1000 problem - QNX 6.4.1
|
Hugh Brown
07/29/2010 7:53 AM
post61015
|
Re: 82574L Gigabit Ethernet chip and Net.e1000 problem - QNX 6.4.1
The Net.e1000 is for QNX4. You must run devnp-e1000.so for QNX6.4.1.
On 10-07-28 9:09 PM, "Dharmapriya Bandara" <community-noreply@qnx.com>
wrote:
> Hi Hugh,
> Thanks for the response. It didn't work. The file I downloaded looks like a
> corrupt one. Ld reported as a corrupt one. I again downloaded the latest one
> from Foundry27 Rel1718.
>
> Once unzipped I ran the following:
>
> ld Net.e1000
>
> it reports as follows:
> file not recognized: File format not recognized
>
> I ran all these under QNX 6.4.1. I am having a feeling that QNX 6.4 doesn't
> recognize this as a binary file. When I run the file manager it reports this
> file as a data file. I changed the attributes of the file too.
>
> Please help.
> Regards,
> DC
>
>
>
> -----Original Message-----
> From: Hugh Brown [mailto:community-noreply@qnx.com]
> Sent: Wednesday, 28 July 2010 9:57 PM
> To: qnx4-community
> Subject: Re: 82574L Gigabit Ethernet chip and Net.e1000 problem - QNX 6.4.1
>
> Just run 'Net.e1000 &', but if that doesn't work, then try 'Net.e1000 -d10d3
> &'. Don't use the 'h' after the device ID.
>
>
> On 10-07-28 3:03 AM, "Dharmapriya Bandara" <community-noreply@qnx.com>
> wrote:
>
>>
>>
>> Hi,
>>
>> I am having a Little Board 735 PC104 motherboard with 82574L Gigabit
>> Ethernet Chip. I am trying to run the Net.e1000
>>
>> driver to get the network working. I ran the following command:
>>
>> Net.e1000 -d 10d3h -F -i 9 -l 1 -vv
>>
>> It gives me the following messages:
>>
>> /bin/Net.e1000[1]: 8hå: cannot execute - No such file or directory
>>
>> /bin/Net.e1000[2]: [-l: cannot execute - No such file or directory
>>
>> /bin/Net.e1000[3]: [-s: cannot execute - No such file or directory
>>
>> /bin/Net.e1000[4]: Where:: cannot execute - No such file or directory
>>
>> /bin/Net.e1000[5]: -b: cannot execute - No such file or directory
>>
>> /bin/Net.e1000[6]: -d: cannot execute - No such file or directory
>>
>> /bin/Net.e1000[7]: -f: cannot execute - No such file or directory
>>
>> /bin/Net.e1000[8]: syntax error: `(' unexpected
>>
>> #
>>
>> Please help.
>>
>> Regards,
>>
>> DC
>>
>> ====
>>
>> Australian Center for Field Robotics
>>
>> J04, Rose Street Building
>>
>> University of Sydney
>>
>> NSW 2006
>>
>> Australia
>>
>> Tel: 61290367179
>>
>> Fax: 61293517474
>>
>>
>>
>>
>
>
>
> _______________________________________________
>
> QNX4 Community
>> Support
> http://community.qnx.com/sf/go/post60839
>
--
Hugh Brown (613) 591-0931 ext. 2209 (voice)
QNX Software Systems Ltd. (613) 591-3579 (fax)
175 Terence Matthews Cres. email: hsbrown@qnx.com
Kanata, Ontario, Canada.
K2M 1W8
|
|
|