foundry27 : Post

Forum Topic - Ethernet between QNX4 and QNX6: (4 Items)

View: as

Hung Nguyen

10/28/2009 9:25 AM

post40876

Hi guys,

I have Ethernet working on QNX6, and want to communicate with a QNX4 node. Does QNX4 support the same Ethernet standard 
currently working on QNX6?

Thanks for your help.
Hung.

Mario Charest

10/28/2009 9:56 AM

post40885

RE: Ethernet between QNX4 and QNX6


> -----Original Message-----
> From: Hung Nguyen [mailto:community-noreply@qnx.com]
> Sent: Wednesday, October 28, 2009 9:26 AM
> To: qnx4-community
> Subject: Ethernet between QNX4 and QNX6
> 
> Hi guys,
> 
> I have Ethernet working on QNX6, and want to communicate with a QNX4
> node. Does QNX4 support the same Ethernet standard currently working on
> QNX6?
> 


No, you need to use TCP/IP

> Thanks for your help.
> Hung.
> 
> 
> 
> _______________________________________________
> 
> QNX4 Community Support
> http://community.qnx.com/sf/go/post40876
>

Hung Nguyen

10/29/2009 10:07 AM

post40986

Re: RE: Ethernet between QNX4 and QNX6

Thanks for your reply, Mario.

I just want to make sure one more thing: I read somewhere that QNX4 runs only on embedded x86. Does this mean that QNX4 
does NOT support Power PC, AMD, Xilinx boards,...?

Cheers,
Hung.

Mario Charest

10/29/2009 10:11 AM

post40987

RE: RE: Ethernet between QNX4 and QNX6


> -----Original Message-----
> From: Hung Nguyen [mailto:community-noreply@qnx.com]
> Sent: Thursday, October 29, 2009 10:08 AM
> To: qnx4-community
> Subject: Re: RE: Ethernet between QNX4 and QNX6
> 
> Thanks for your reply, Mario.
> 
> I just want to make sure one more thing: I read somewhere that QNX4
> runs only on embedded x86. Does this mean that QNX4 does NOT support
> Power PC, AMD, Xilinx boards,...?

That is correct.

> 
> Cheers,
> Hung.
> 
> 
> 
> _______________________________________________
> 
> QNX4 Community Support
> http://community.qnx.com/sf/go/post40986
>

Return

The text you entered is not a valid object ID
More Information
Object IDs begin with an object prefix and end with a number. For example, if you enter
artf2345
the application will jump directly to an artifact with the ID artf2345. Some valid object prefixes are:
artf	for an artifact
doc	for a document
page	for a project page
topc	for a discussion topic
wiki	for a wiki page