satish pattar(deleted)
01/23/2009 6:39 AM
post20681
|
Hi ,
I have installed QNX 6.4.0 Neutrino (self hosted). The problem I am facing is :
Whenever I open some applications , the application window's controller buttons like "close , minimize & maximise" are
going beyond my monitor's display area. I am not understanding what might have gone wrong.
I checked my display settings & they are..
display settings :
driver : svga
color mode : 64k
resolution : 640*480
refresh 60hz
cursor hardware
& the output of PCI is as below :
PCI version = 2.10
Class = Display (VGA)
Vendor ID = 8086h, Intel Corporation
Device ID = 2562h, 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device
PCI index = 0h
PCI Mem Address = f0000000h enabled
PCI Mem Address = ffa80000h enabled
PCI Int Pin = INT A
Interrupt line = 11
CPU Interrupt = bh
Class = Mass Storage (IDE)
Vendor ID = 8086h, Intel Corporation
Device ID = 24cbh, 82801DB (ICH4) IDE Controller
PCI index = 0h
PCI IO Address = 0h enabled
PCI IO Address = 0h enabled
PCI IO Address = 0h enabled
PCI IO Address = 0h enabled
PCI IO Address = ffa0h enabled
PCI Mem Address = ffeffc00h enabled
PCI Int Pin = INT A
Interrupt line = no connection
Class = Multimedia (Audio)
Vendor ID = 8086h, Intel Corporation
Device ID = 24c5h, 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller
PCI index = 0h
PCI IO Address = e400h enabled
PCI IO Address = e080h enabled
PCI Mem Address = ffa7f800h enabled
PCI Mem Address = ffa7f400h enabled
PCI Int Pin = INT B
Interrupt line = 11
CPU Interrupt = bh
Class = Network (Ethernet)
Vendor ID = 100bh, National Semiconductor Corporation
Device ID = 20h, DP83815 (MacPhyter) Ethernet Controller
PCI index = 0h
PCI IO Address = d800h enabled
PCI Mem Address = ff8ff000h enabled
PCI Expansion ROM = ff8e0000h disabled
PCI Int Pin = INT A
Interrupt line = 5
CPU Interrupt = 5h
Please help me resolve this issue.
Thanks,
Satish Pattar
|
|
|