We downloaded from QNX: 
1. DSPLink 1.61 and 1.62 patch
2. We merged the patch with 1.61.
3. We got the DSPLink Binary and the libraries.

But we have a confusion going further-

OMAPL138 has a DDR controller But OMAPL137 has a SDRAM only.

But the DSPLink 1.62 provided  by TI, has ONLY SDRAM support. It does not support DDR.

As QNX has tested the DSPLink, It should have used DSPLink 1.62 provided by TI.
So we were curious to know, how they compiled the DSPLink 1.62 for OMAPL138.

So we were curious to know, which GEM file was used by QNX to build DSPLink1.62 for OMAPL138.

It will be good for us, If we have any suggestions to change the RAM type from SDRAM to DDR.